T-Rex 0.26.8 ETHW, ETC (+dual mining) GPU miner

[sxemini]

what exactly has been changed now so that you can get the full performance from the most of all LHR cards.
I am only interested in what has been implemented now, some key / certificate / code from NVIDIA itself.

Has something been leaked?

I think nvidia leak the right infos - because they cleanup there warehouses for the new gpu generation.

[joker_josue]

Has anyone here tested it on the RTX 3060 TI LHR?
Yes, what was the optimal performance?

[solexsoft]

I have MSI 3060ti  Gaming X 8GB.  CPU -502; GPU +1100 - result 60.87 MH, 129 W, 50C GPU temp, Fan - 100%
It has been stable for 11 hours with T-Rex 0.26.1

[tunth]

Hi, how do i run the new miner with admin privileges?
Can anyone help pls?

[willi9974]

Hi, how do i run the new miner with admin privileges?
Can anyone help pls?

Right Click, run as Administrator
If you run your miner under Windows, but so i know it is only for windows the Admin Right topic.

Best regards and happy Mining
Willi

[tunth]

Hi, how do i run the new miner with admin privileges?
Can anyone help pls?

Right Click, run as Administrator
If you run your miner under Windows, but so i know it is only for windows the Admin Right topic.

Best regards and happy Mining
Willi

Thanks, but i run it via an batchfile, that rightclick and run as admin. does not work then.

[willi9974]

than right click on your batch file AND IMPORTAND the path to the miner exe must be a full path name... like this c:\program\miner\t-rex_version.exe

[Coinfarm ventures]

Has anyone here tested it on the RTX 3060 TI LHR?
Yes, what was the optimal performance?

Yes, I have two EVGA RTX 3060 Ti FTW3 cards. But they are very unstable on T-rex or NBminer when the hashrate is > 50 Mh. Maybe because the driver is old. So I don't think T-rex is at fault.

[tunth]

than right click on your batch file AND IMPORTAND the path to the miner exe must be a full path name... like this c:\program\miner\t-rex_version.exe

Yeah, it is running, my RTX3070Ti hashes around 75mHs at 170W.

[joker_josue]

Has anyone here tested it on the RTX 3060 TI LHR?
Yes, what was the optimal performance?

Yes, I have two EVGA RTX 3060 Ti FTW3 cards. But they are very unstable on T-rex or NBminer when the hashrate is > 50 Mh. Maybe because the driver is old. So I don't think T-rex is at fault.

I felt this too, when I tested the T-Rex on my 3060 Ti.
I ended up getting to use NiceHash for now, and I'm getting a value of around 63 MH/s.

[socks435]

Has anyone here tested it on the RTX 3060 TI LHR?
Yes, what was the optimal performance?

Yes, I have two EVGA RTX 3060 Ti FTW3 cards. But they are very unstable on T-rex or NBminer when the hashrate is > 50 Mh. Maybe because the driver is old. So I don't think T-rex is at fault.

I felt this too, when I tested the T-Rex on my 3060 Ti.
I ended up getting to use NiceHash for now, and I'm getting a value of around 63 MH/s.

Have you tried to update GPU driver or else try to mine on ssl port or try to switch on other pool.

If not try to downgrade the driver.

[ivanpop]

Is there an option to lower mining intensity of a gpu if it reaches a certain temperature?
I remember that claymore had the -ttli option and if you set it to -ttli 75 if that card reaches 75 degrees it starts mining slower.

[vaggos72]

I have installed from yesterday the new version 0.26.1 it's very unstable.
My cards are ASUS RTX 3060 LHR.
Nvidia drives: 512.15
OS: windows 10 pro
With MSI settings: power 64% (108watt)
                            core clock: -190
                            memory clock: +1250
MH/s: 48-49 each card.
All night the cards crashed  from 3 to 10 times.

[sxemini]

I have installed from yesterday the new version 0.26.1 it's very unstable.
My cards are ASUS RTX 3060 LHR.
Nvidia drives: 512.15
OS: windows 10 pro
With MSI settings: power 64% (108watt)
                            core clock: -190
                            memory clock: +1250
MH/s: 48-49 each card.
All night the cards crashed  from 3 to 10 times.

Try the new 0.26.2 beta or lower your memclocks. On some cards you need to do this with full hashrate.

[Kruvojadnii]

Hi All,

T-Rex 0.26.x is great ! I had a RTX 3070ti that jumped from ~ 54MH/s to 82MH/s+ with it So I decided to buy two 3080s but I have a strange issue with one of them - RTX 3080 10G MSI Gaming Z. Whatever overclock I try on latest T-rex versions 0.26.1, 0.26.3 and 0.26.4 it cannot go over 83-85MH/s The other one - RTX 3080 MSI Ventus 3X works over 103MH/s on the same config with the same settings on MSI Afterburner. The only difference that I see is that the MSI Gaming Z is somewhat "locked" at ~200W TDP. It doesn't matter what I set in the AB. The best that I have achieved is:
+202 on the core (~1455 - 1640Mhz)
-154 on the memory (9097)
102% power limit (just to be sure that is enough)
70% fan speed
207-209W power
50/90C core/mem
~82MH/s

The Ventus has no issues working on settings:
-202 on the core
+1461 on the memory
76% power limit
91% fan speed
~240 power
43/96C core/mem
~103MH/s

Here is the exact model of the MSI GeForce RTX 3080 Ventus 3X Plus 10G OC LHR V389-263R  https://www.vario.bg/msi-geforce-rtx-3080-ventus-3x-10g-oc-v389-001r and here is the MSI RTX 3080 Gaming Z Trio https://www.caseking.de/en/msi-geforce-rtx-3080-gaming-z-trio-10g-lhr-10240-mb-gddr6x-gcmc-288.html

Could it be that the MSI Gaming Trio is version 2.0 on the board? When I decrease the core and increase the memory it gets worse. Drops under 78MH/s and the power drops under 200.

Thank you!
 

[peteycamey]

does t-rex support claymore manager report compatibility?

[andrew115200]

hello guys
i have rig with 6x 1660 super 6gb on win10 1809, pagefile 123gb
over the past few weeks when i start the rig, it says that there is little free memory left and it randomly crash or not start with error "CUDA_ERROR_OUT_OF_MEMORY"
when mining is run, afterburner says only 5287gb vram is busy (at epoch 498), but trex says memory left is 23mb, 1660s have 6144mb, windows drivers use up to 200mb per card
where is ~800mb of vram, why trex not see these 800mb of memory ?
primary graphic is integrated and get memory from ram, update/reinstall/downgrade drivers is not helps
any ideas how to fix this other than to switch to hive ?
sorry for my english
https://ibb.co/ccFfFwM

[andrew115200]

hello guys
i have rig with 6x 1660 super 6gb on win10 1809, pagefile 123gb
over the past few weeks when i start the rig, it says that there is little free memory left and it randomly crash or not start with error "CUDA_ERROR_OUT_OF_MEMORY"
when mining is run, afterburner says only 5287gb vram is busy (at epoch 498), but trex says memory left is 23mb, 1660s have 6144mb, windows drivers use up to 200mb per card
where is ~800mb of vram, why trex not see these 800mb of memory ?
primary graphic is integrated and get memory from ram, update/reinstall/downgrade drivers is not helps
any ideas how to fix this other than to switch to hive ?
sorry for my english
https://ibb.co/ccFfFwM

looks like gminer has solved the problem, at least for now

[NorthernMiner74]

Hello,

I have a MSI RTX 3060 and have played around with lots of settings on dual mining ETH + ERG but can only acheive 20.3mh/s Eth and 0 MH/s. Current .BAT:

@cd /d "%~dp0"
"C:\Users\2205DGMine\Downloads\New TRex\t-rex-0.26.4-win (1)\t-rex.exe" -d 1 -a ethash --dual-algo autolykos2 -o stratum+tcp://eu1.ethermine.org:4444 -u <wallet> -p x -w <miner> --url2 "stratum+tcp://pool.eu.woolypooly.com:3100" --user2 <wallet.miner> --pass2 x --lhr-tune 20 --pl 100 --lock-cclock 1500 --cclock 0 --mclock 0 --intensity 25
pause

I have reverted to mining just ETH and pushing memeory as much as I think I can which is getting 27.3MH/s @99w but I am worried mclock/cclock are high, should I be? .BAT:

@cd /d "%~dp0"
t-rex.exe -d 1 -a ethash -o stratum+tcp://eu1.ethermine.org:4444 -u <wallet> -p x -w <mine> --lhr-tune 91 --pl 58 --lock-cclock 1850 --mclock 1875 --intensity 25
pause

I am reading that I should be getting closer to 48MH/s or more.

Win 11 home
Driver 512.95

These results and settings seem to be best I can acheive. Any advise welcome.

[joker_josue]

Hello,

I have a MSI RTX 3060 and have played around with lots of settings on dual mining ETH + ERG but can only acheive 20.3mh/s Eth and 0 MH/s. Current .BAT:

@cd /d "%~dp0"
"C:\Users\2205DGMine\Downloads\New TRex\t-rex-0.26.4-win (1)\t-rex.exe" -d 1 -a ethash --dual-algo autolykos2 -o stratum+tcp://eu1.ethermine.org:4444 -u <wallet> -p x -w <miner> --url2 "stratum+tcp://pool.eu.woolypooly.com:3100" --user2 <wallet.miner> --pass2 x --lhr-tune 20 --pl 100 --lock-cclock 1500 --cclock 0 --mclock 0 --intensity 25
pause

I have reverted to mining just ETH and pushing memeory as much as I think I can which is getting 27.3MH/s @99w but I am worried mclock/cclock are high, should I be? .BAT:

@cd /d "%~dp0"
t-rex.exe -d 1 -a ethash -o stratum+tcp://eu1.ethermine.org:4444 -u <wallet> -p x -w <mine> --lhr-tune 91 --pl 58 --lock-cclock 1850 --mclock 1875 --intensity 25
pause

I am reading that I should be getting closer to 48MH/s or more.

Win 11 home
Driver 512.95

These results and settings seem to be best I can acheive. Any advise welcome.

Try doing the configuration through MSI Afterburner. And use this:


I've been using this setup for over a year without problems, getting +/- 48MH/s.


EDIT:
And you have to use the 470.05 driver, you can find it here:
https://bitcointalk.org/index.php?topic=5336026.msg56961259#post_objetivo in the subtheme: ASSEMBLY & FIRST IMPRESSIONS