T-Rex 0.26.8 ETHW, ETC (+dual mining) GPU miner

[miner29]

Hello,

i run 4 different 3080 on a Z68 Extreme 3 Gen 3.

Whenever i try to run all 4 together one card randomly idles.

At the end it goes like this



Sometimes is get this at the "initialisation" after retry



Does anyone knows how to fix it?

Tell us more about the rig. 
Are cards on risers or all on mobo?

Windows or linux?

[Sledge0001]

Giving TREX a shot mining ETH.

Is there a way to see the best share submitted and the cost of electric?

Also I can't seem to get the --autoupdate to work. Suggestions?

t-rex.exe --autoupdate -a ethash -o stratum+tcp://us2.ethermine.org:4444 -u santized -p x -w Rig001
pause

[sirbrokealot]

Hello,

i run 4 different 3080 on a Z68 Extreme 3 Gen 3.

Whenever i try to run all 4 together one card randomly idles.

At the end it goes like this

https://imgur.com/a/GNR8OWG

Sometimes is get this at the "initialisation" after retry

https://imgur.com/a/vttZwDv

Does anyone knows how to fix it?

Tell us more about the rig. 
Are cards on risers or all on mobo?

Windows or linux?

Thank you for helping approach.

I bought a new Z390 board and it works with 6 cards now.

Is it possible to tewak OC settings directly in T-rex for each card? Currently i have to use Afterburner.

I get a lower hashrate on gpu slot 0. But no Monitor plugged in. No thermal issue. and I set my virtual memory to 24000.
Does anybody know why gpu0 could get lower hashes?

regards and thank you

[TheSkyTurk]

I use PhoenixMiner for my all 40 amd-nvidia rigs.
I decided to try t-rex for my nvidia rigs. My first try is 12 pcs 3060ti.
t-rex gives higher hashrate with the same oc settings than PhoenixMiner on HiveOS latest.
Do you have any advice for RTX30XX series gpu ethash mining via t-rex ?

HiveOS: 0.6-195@210127
Kernel: 5.4.80-hiveos
Driver: 460.39

[em2000]

Hello!
Dear developers.
Please help me set up monitoring rig.
In the config, hiveos wrote these lines.
"--api-bind-telnet": "192.168.1.162:4068"
"--api-bind-http": "192.168.1.162:4067"
In the browser, I can not monitor the rig either through 4068 port or through 4067.
What am I doing wrong? Is there some kind of monitoring software?

Hi. Monitoring web page is accessible through a URL printed by the miner when it starts up, for example:
"For control navigate to: http://192.168.88.235:4067/trex"
However, since you're already using HiveOS I see no point in using it, HiveOS monitoring features are far superior.

Hello! I want to figure out why I still can't monitor the rig through the browser. Please look at my screenshots, tell me please what I'm doing wrong
https://postimg.cc/gallery/3HCNS5y

[justice-r]

Hey, extremely good miner.

Getting 62.4 Mh/s from my Asus 3060ti.

Power limit 60% 119w
Temp Limit 66c
Core clock -502
Memory clock +1340
Fan speed 58% ~56c

Stable for 2 days..

Anyone knows what the R:0% means ? Can't find an answer anywhere..

Thanks,

[Blockpusher]

Anyone knows what the R:0% means ? Can't find an answer anywhere..

Thanks,

It's the Rejected shares. So 0% is fine

[mirny]

im not able to run latest releases of trex like 0.19.4, 0.19.7 and 0.19.9 too
im only getting this error: 20210131 02:32:02 TREX: eyJhIjoicFFvOEhxTHdsTEFVdURwamp5THFSeGFyWEhSOEEzekF4c2xTVm5WMDhMTT0iLCJiIjoiWGJ 1SVI0dDhYMk4yYnBtdTdSRTdPUT09In0K

aby help, or advice how to solve this?
cheers

os ubuntu 18.04 64bit, Driver Version: 460.32.03
RTX 3060Ti cards

but version 0.19.1 is working, hmm

[joseph32]

Hey T-Rex,

can you please add support for the RTX 30xx cards and newer nVidia drivers then 457.51? With "--no-nvml" it will work, but without any stats, which is crap.

Thanks and keep up the great work!

[trexminer]

im not able to run latest releases of trex like 0.19.4, 0.19.7 and 0.19.9 too
im only getting this error: 20210131 02:32:02 TREX: eyJhIjoicFFvOEhxTHdsTEFVdURwamp5THFSeGFyWEhSOEEzekF4c2xTVm5WMDhMTT0iLCJiIjoiWGJ 1SVI0dDhYMk4yYnBtdTdSRTdPUT09In0K

aby help, or advice how to solve this?
cheers

os ubuntu 18.04 64bit, Driver Version: 460.32.03
RTX 3060Ti cards

but version 0.19.1 is working, hmm

Hi. Make sure "LD_PRELOAD" environment variable is not set when running t-rex.

[trexminer]

Hey T-Rex,

can you please add support for the RTX 30xx cards and newer nVidia drivers then 457.51? With "--no-nvml" it will work, but without any stats, which is crap.

Thanks and keep up the great work!

Hi. What version of t-rex are you running? Newer versions should work fine with new drivers.

[mirny]

im not able to run latest releases of trex like 0.19.4, 0.19.7 and 0.19.9 too
im only getting this error: 20210131 02:32:02 TREX: eyJhIjoicFFvOEhxTHdsTEFVdURwamp5THFSeGFyWEhSOEEzekF4c2xTVm5WMDhMTT0iLCJiIjoiWGJ 1SVI0dDhYMk4yYnBtdTdSRTdPUT09In0K

aby help, or advice how to solve this?
cheers

os ubuntu 18.04 64bit, Driver Version: 460.32.03
RTX 3060Ti cards

but version 0.19.1 is working, hmm

Hi. Make sure "LD_PRELOAD" environment variable is not set when running t-rex.

hello, thank you for hint, but where i can find it and remove it, i dont see it in my batch files nor even in .bashrc
where should i look for it?

e: or simply can you give me a command, how to turn it off?
cheers

[trexminer]

hello, thank you for hint, but where i can find it and remove it, i dont see it in my batch files nor even in .bashrc
where should i look for it?

e: or simply can you give me a command, how to turn it off?
cheers

Try running
LD_PRELOAD="" ./t-rex <...your args...>

[mirny]

hello, thank you for hint, but where i can find it and remove it, i dont see it in my batch files nor even in .bashrc
where should i look for it?

e: or simply can you give me a command, how to turn it off?
cheers

Try running
LD_PRELOAD="" ./t-rex <...your args...>

working now, thank you very much

[justice-r]

Anyone knows what the R:0% means ? Can't find an answer anywhere..

Thanks,

It's the Rejected shares. So 0% is fine

Oh perfect.. Thanks for the answer mate.. 

[DJSimmy]

Hello @trexminer and all,

I keep getting an error when I start T-Rex.exe:
"File Corrupted! This program has been manipulated and maybe it's infected by a Virus or cracked. This file won't work anymore"

Windows 10
Loading from a Windows Defender exclusion folder
All antivirus shut off
Tried running as Admin, no change
Downloaded T-rex 19.9 and others on different browsers
Sometimes loads fine on PC reboot, most of the time does not

[joseph32]

Hey T-Rex,

can you please add support for the RTX 30xx cards and newer nVidia drivers then 457.51? With "--no-nvml" it will work, but without any stats, which is crap.

Thanks and keep up the great work!

Hi. What version of t-rex are you running? Newer versions should work fine with new drivers.

Hey,

ok strange. Running on 3 different PC's with ASUS ROG Strix GeForce RTX 3090 OC. With a max power limit of 123% it wont run, but with the --no-nvml parameter it will run. With lower power limits it run smooth on all 3 PC's. Crazy thing... Maybe a bug in the newest nVidia driver 461.40 or in the firmware, because some games also crash with max power limit. So dont care about this request

[TheSkyTurk]

im newbie in t-rex. phoenixminer shows invaid shares count with red colour in HiveOS.
T-rex shows Rejected shares in miner but not reported via HiveOS console. I have to open the shell manager and miner.
is it possible to shows rejected shares as phoenixminer invalid shares ?

The second question:
Miner restarted the rig after 39 minutes mining.
There is no any warning on HiveOS. I think it is because of the overclock.
How sohuld i know what is the problem ? Which gpu is the reason of the problem ?
PhoenixMiner puts a log file to hiveos so we can see which gpu is the problem nd lower the overclcok.
Please help me about it.

[Miningminds]

Hi everybody!!

3 years disconnected from this world but I'm back

I have seen these days several changes and after 3 days mining with phoenixminer, today I've read about this new miner (used to mine with claymore years ago)

Want to try it, but as my rig is not fully stable actually and don't know which is the problem (it freezes about 5-6 times a day), I want to ask you some questions:

- Is it possible to config this t-rex miner like my phoenix bat file:

 "PhoenixMiner.exe -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -log 2 -logsmaxsize 0 -retrydelay 1 -ftimeout 600 -rmode 2 -proto 4 -stales 0 -rate 1 -gser 4"

- Is it compatible with a reboot bat file also?

Thanks in advance

[Long Duk Dong]

Hello!

   I am super new, have been using T-Rex for ETH since mid-December. Since upgrading to 19.9 and reading more about the supported parameters I was excited to learn I could use --mt 0-6 and fine tune my cards memory similar to ETH pill w/o having to run two separate programs. At any rate I made the required changes and tested each level and landed on 4 giving me see results as 5 and 6 but higher rates than 3 so I settled in there. All cards are the same so it works damn good.

   Since using the parameter however  I got a message within T-Rex window "... unable to set... Run as admin.... " The only file I can force to run as Admin is the actual T-Rex file which I don't really mess with normally, I simply edited the batch file and run that. So at any rate I right clicked on the t-rex.exe and selected run as admin and then also tried with advanced> run as admin for everyone. With either of those selected it is able to load the --mt levels but also opens two command windows. I know this is only an annoyance but it's also possible I'm doing things entirely wrong. I figured someone here has seen this before and knows what to do.  I have 1 8x gpu rig and 1 test bench for new card testing and tinkering and both have the exact same issue.

TIA