GMiner v3.44 Dero/Karlsen/Radiant/Ergo+IronFish+ZIL/KAWPOW/Equihash/Cortex

[Akyboy]

2.50 is broken.
Not reporting to the pool but mining
Did i mine to someone else's address for last 1h?

[WARMANGALAXY]

2.50 is broken.
Not reporting to the pool but mining
Did i mine to someone else's address for last 1h?

check if the pool and your wallet address are specified correctly in the configuration file of the miner

[Akyboy]

2.50 is broken.
Not reporting to the pool but mining
Did i mine to someone else's address for last 1h?

check if the pool and your wallet address are specified correctly in the configuration file of the miner

I didn't change anything in my bat file. Just replaced old version .exe with new one

[TBOEMC]

2.50 is broken.
Not reporting to the pool but mining

...i have similar problem
RTX 2080 cannot start - miner stops right before cards recognizing.
No "green" list with card names.

my other cards are OK (2070 and 2070S, 2080S, 30xx)

[limis]

hi,
using GMiner 2.50 with ethermine ant see some 1-3% stales everyday but GMiner statistics windows show no stales.
It is always  like shares X/0/0

Is it normal ?

[magicxs]

2.50 is broken.
Not reporting to the pool but mining

similar to mine...client is mining but on pool the miner is reporting as worker "eth 1.0", when i start 2.50 on other rigs, then they all have the same worker name

[ztaz]

2.50 is broken.
Not reporting to the pool but mining

similar to mine...client is mining but on pool the miner is reporting as worker "eth 1.0", when i start 2.50 on other rigs, then they all have the same worker name

a similar situation with version 2.50 - everything was lost to the worker from the pool, there was only one eth1.0

[hopfi2k]

2.50 is broken.
Not reporting to the pool but mining

similar to mine...client is mining but on pool the miner is reporting as worker "eth 1.0", when i start 2.50 on other rigs, then they all have the same worker name

Adding the

Code:

--worker

parameter resolved the issue for me...

[Papa Piddin]

How do you add the --worker command ? Do you delete the worker name and "." after the eth wallet address, then add worker command with space then worker name?

I am in work for 12 hours so only noticed the "problem" on my pool dashboard

I have the same problem with my 2 workers just showing as 1 worker named eth1.0 at the pool.

Shares looks normal for my total hashrate of 180mh, but my reported hashrate are a lot lower and spiking with variable figures.

On Gminer 2.49, pool reported numbers matched my Hashrate on local screen.
 

[Akyboy]

How do you add the --worker command ? Do you delete the worker name and "." after the eth wallet address, then add worker command with space then worker name?

I am in work for 12 hours so only noticed the "problem" on my pool dashboard

I have the same problem with my 2 workers just showing as 1 worker named eth1.0 at the pool.

Shares looks normal for my total hashrate of 180mh, but my reported hashrate are a lot lower and spiking with variable figures.

On Gminer 2.49, pool reported numbers matched my Hashrate on local screen.
 

Yes papa.

Like this:
miner.exe -a ethash  --server eth-us-east.flexpool.io:5555 --ssl 1 -u YOURADDRESS --worker RIGNAME
pause

[Papa Piddin]

Yes papa.

Like this:
miner.exe -a ethash  --server eth-us-east.flexpool.io:5555 --ssl 1 -u YOURADDRESS --worker RIGNAME
pause

Thanks will give it a go when I get home from work 

[Akyboy]

Yes papa.

Like this:
miner.exe -a ethash  --server eth-us-east.flexpool.io:5555 --ssl 1 -u YOURADDRESS --worker RIGNAME
pause

Thanks will give it a go when I get home from work 

Welcome!

[WARMANGALAXY]

Does this miner support and RX 580/570 cards to mine Raven.  when ever I try to use it, I get this error message!

12:01:14 Failed to initialize miner on GPU0: MSI Radeon RX 570 Series 4GB [0000:01:00.0]: Device not supported for this algorithm
12:01:14 Failed to initialize miner on GPU1: ASUS Radeon RX 570 Series 4GB [0000:04:00.0]: Device not supported for this algorithm
12:01:14 Failed to initialize miner on GPU2: SAPPHIRE AMD Radeon (TM) RX 470 Graphics 4GB [0000:05:00.0]: Device not supported for this algorithm
12:01:14 Failed to initialize miner on GPU3: SAPPHIRE Radeon RX 570 Series 4GB [0000:06:00.0]: Device not supported for this algorithm
12:01:14 No devices for mining

thanks

you need used linux

[TBOEMC]

Does this miner support and RX 580/570 cards to mine Raven.  when ever I try to use it, I get this error message!

12:01:14 Failed to initialize miner on GPU0: MSI Radeon RX 570 Series 4GB [0000:01:00.0]: Device not supported for this algorithm
12:01:14 Failed to initialize miner on GPU1: ASUS Radeon RX 570 Series 4GB [0000:04:00.0]: Device not supported for this algorithm
12:01:14 Failed to initialize miner on GPU2: SAPPHIRE AMD Radeon (TM) RX 470 Graphics 4GB [0000:05:00.0]: Device not supported for this algorithm
12:01:14 Failed to initialize miner on GPU3: SAPPHIRE Radeon RX 570 Series 4GB [0000:06:00.0]: Device not supported for this algorithm
12:01:14 No devices for mining

thanks

you need used linux

Ravencoin doesnt have big DAG, so 4GB cards are OK, for example ETC, BeamhashIII and others...

[miner29]

Does this miner support and RX 580/570 cards to mine Raven.  when ever I try to use it, I get this error message!

12:01:14 Failed to initialize miner on GPU0: MSI Radeon RX 570 Series 4GB [0000:01:00.0]: Device not supported for this algorithm
12:01:14 Failed to initialize miner on GPU1: ASUS Radeon RX 570 Series 4GB [0000:04:00.0]: Device not supported for this algorithm
12:01:14 Failed to initialize miner on GPU2: SAPPHIRE AMD Radeon (TM) RX 470 Graphics 4GB [0000:05:00.0]: Device not supported for this algorithm
12:01:14 Failed to initialize miner on GPU3: SAPPHIRE Radeon RX 570 Series 4GB [0000:06:00.0]: Device not supported for this algorithm
12:01:14 No devices for mining

thanks

you need used linux

I am using Linux!  That is where I get that error!

Since AMD i suggest TeamRedMiner  see if you get the same error

[angelbbs]

Aeternity broken

Code:

+----------------------------------------------------------------+
|                          GMiner v2.50                          |
+----------------------------------------------------------------+
Algorithm:          Cuckoo29
DevFee:             2%
Stratum server:
  host:             ae.2miners.com:4040
  user:             ak_v4cBSQhjh8gc49XMmrt1ELXJDA8U7sDZVKhLJiAzjPymVFgFQ
  password:         x
Power calculator:   on
Color output:       on
Watchdog:           on
API:                off
Log to file:        log.txt
Selected devices:   GPU0 GPU1
Intensity:          100  100
Temperature limits: 90C  90C
------------------------------------------------------------------
11:04:44 GPU0 GIGABYTE GeForce GTX 1070 8GB: Selected 6GB Solver
11:04:45 GPU1 NVIDIA GeForce GTX 1070 8GB: Selected 6GB Solver
11:04:45 Connected to ae.2miners.com:4040 [51.89.96.116]
11:04:45 Subscribed to Stratum Server
11:04:45 Set Extra Nonce: 001407d7
11:04:45 Authorized on Stratum Server
11:04:45 Set Difficulty: 16

and mining doesn't start

[Digital_Seytan]

Good day, Dev gminer, please add option mining speed restart option, and timeout restart

Gminer 2.49 works very good but new version 2.50 works very bad 

[TBOEMC]

GMiner v2.50 available for download

v2.50

Still no response/answers from developers?
4.50 is bugged

[joylesshumster]

Agree, 2.50 not working with CuckooCycle and Cuckatoo32

[Akyboy]

GMiner v2.50 available for download

v2.50

Still no response/answers from developers?

Looks to me that devs are here to get their dev fee nothing else