ManuBBXX
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 16, 2021, 09:05:20 AM |
|
GMiner v2.68 available for download
v2.68 + detect lock of LHR GPUs, automatically unlock and continue mining + display of miner restart count by watchdog
Ethash fee is 0.65% KAWPOW fee is 1%
Unlock at 70% max ?
|
|
|
|
edisonchan
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2021, 07:46:05 AM |
|
GMiner v2.68 available for download
v2.68 + detect lock of LHR GPUs, automatically unlock and continue mining + display of miner restart count by watchdog
Ethash fee is 0.65% KAWPOW fee is 1%
Is there no more "--lhrxx" switch?
|
|
|
|
whoknows777
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2021, 10:06:32 PM |
|
GMiner v2.68
Hey guys, i'm seeing like really a lot of these errors lately: 00:42:44 Pool: eu1.ethermine.org:4444 Shares/Minute: 0.84
00:42:44 Pool Hashrate: 59.70 MH/s Efficiency: 97.65 %
00:42:44 Uptime: 1d 09:25:11 Electricity: 3.926 kWh
00:42:47 Connection Error: Connection closed
00:42:47 Stopped Mining on GPU0
00:42:52 Connected to eu1.ethermine.org:4444 [172.65.207.106]
00:42:52 Authorized on Stratum Server
00:42:52 New Job: 691fcd03 Epoch: #442 Block: #13265136 Diff: 4.295G
00:42:52 Started Mining on GPU0: SAPPHIRE GeForce RTX 3070 8GB [0000:01:00.0]
Is it an issue with the miner or my network? Why it stops mining on a connection error instead of reconnecting? Looks the miner is keeping connections to my pool (eu1.ethermine.ga) and dev pool (eth.2miners.com). ethermine ping is 1.2ms 2miners ping is 29.6ms fiber optic connection. zero packet loss. can get 10 errors like this within 10 minutes with slightly over 100 miners. any help or advices?
|
|
|
|
miner29
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2021, 10:35:26 PM |
|
Post up your command line / bat or .sh file launching the miner. Probably something is not properly configed. You can replace your wallet address with (wallet) for privacy
And what is your dns setting. I use 8.8.8.8 its google.
|
|
|
|
whoknows777
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 21, 2021, 09:09:07 AM |
|
Post up your command line / bat or .sh file launching the miner. Probably something is not properly configed. You can replace your wallet address with (wallet) for privacy
And what is your dns setting. I use 8.8.8.8 its google.
the miner is run with these options: --algo ethash --server eu1.ethermine.org --port 4444 --ssl 0 --user 0xwallet.worker --api 3333 DNS: is 1.1.1.1 ping: 1.26ms query time: 46ms P.S. in the last 24 hours there were 2 errors where the pool closed connection with this error message: [2021-09-21 05:44:25] Pool eu1.ethermine.org connection was closed by the pool.
[2021-09-21 05:44:25] Pool eu1.ethermine.org connecting to address 172.65.207.106.
[2021-09-21 05:44:25] Pool eu1.ethermine.org successfully connected to address 172.65.207.106.
[2021-09-21 05:44:25] Pool eu1.ethermine.org login succeeded.
[2021-09-21 05:44:25] Pool eu1.ethermine.org set difficulty to 1.000 (4295 MH)
[2021-09-21 05:44:25] Pool eu1.ethermine.org received new job. (job_id: 0x88621e27099..., diff 1.000 / 4295 MH)
and there were 40 error like i've mentioned about with this message: 02:14:32 Connection Error: Connection closed
02:14:32 Stopped Mining on GPU0
02:14:37 Connected to eu1.ethermine.org:4444 [172.65.207.106]
02:14:37 Authorized on Stratum Server
02:14:37 New Job: fe4de7ef Epoch: #442 Block: #13265567 Diff: 4.295G
02:14:37 Started Mining on GPU0: GeForce RTX 3080 10GB [0000:01:00.0]
02:14:39 New Job: 082ffb8a Epoch: #442 Block: #13265567 Diff: 4.295G
as you can see with the "connection closed by the pool" it doesn't write "Stopped Mining on GPU" into the log. but with the other and most frequent "connection closed" it does write "Stopped Mining on GPU".
|
|
|
|
Dmitriy_AT_
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 23, 2021, 10:59:27 AM |
|
What does this message?
"2021-09-23 11:50:58 Terminate signal received, shutdown Miner"
What is the signal?
|
|
|
|
Zminer777 (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 488
Merit: 37
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 24, 2021, 03:17:45 PM |
|
GMiner v2.69 available for download
v2.69 + added auto-tune for LHR GPUs (enabled by default, to disable pass --lhr_autotune 0) + fixed RavenCoin support under Windows 7 + increased reconnect tries on connection loss (--reconnect_count) + improved miner stability
Ethash fee is 0.65% KAWPOW fee is 1%
|
|
|
|
ekhazaee
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 27, 2021, 12:07:38 PM |
|
great miner or maybe the best in my opinion. but i have feature request. it will be very great if i have option to modified the monitoring data in telemetry server. basic info like resizing the table or removing some field to adjust it for small always on monitor. or maybe using responsive table design to fit any resolution or add lite version with GPU,Temperature,Speed,Shares and Pool Hashrate. so i could merge multiply miner to just one page to monitor. and of course alert or system restart option in hashrate drop would be very much appreciated.
|
|
|
|
soda37
Jr. Member
Offline
Activity: 63
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/sad.gif) |
September 29, 2021, 08:30:35 PM |
|
GMiner v2.69 available for download
v2.69 + added auto-tune for LHR GPUs (enabled by default, to disable pass --lhr_autotune 0) + fixed RavenCoin support under Windows 7 + increased reconnect tries on connection loss (--reconnect_count) + improved miner stability
Ethash fee is 0.65% KAWPOW fee is 1%
Miner is good, but this version still has issues with clock and voltage control on RX6600, sometimes it fails to set them. Also, apparently there is no such function like serialization in this miner unlike in Phoenix miner. Because of this PSU shutdowns my rig with mix of cards if all cards are started in gminer at once. I ended up using gminer for nvidia cards only and Phoenix miner with serialization enabled for RX6600 in the rig and only this combination works for me ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) inconvenient.
|
|
|
|
bathrobehero
Legendary
Offline
Activity: 2002
Merit: 1051
ICO? Not even once.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 29, 2021, 08:35:00 PM |
|
Also, apparently there is no such function like serialization in this miner unlike in Phoenix miner. Because of this PSU shutdowns my rig with mix of cards if all cards are started in gminer at once. I ended up using gminer for nvidia cards only and Phoenix miner with serialization enabled for RX6600 in the rig and only this combination works for me ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) inconvenient. If your PSU shuts down during startup you're already doing something wrong, like using a way undersized or terrible quality PSU. Have at least 10-20% overhead in terms of PSU capacity and never walk the line. But if you really need launch serialization, have two (or more) executables one starting the first half of cards and the second instance starting the rest a bit later. Though I'd seriously look into the PSU issue.
|
Not your keys, not your coins!
|
|
|
Zminer777 (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 488
Merit: 37
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 01, 2021, 02:56:54 PM |
|
GMiner v2.70 available for download
v2.70 + improved auto-tune for LHR GPUs, now miner speedup performance when GPU is steady + removed --lhr_tune1 / --lhr_tune2 parameters, use --lhr_tune to tune LHR GPUs (value range is -10 - 10, old parameters ignored for compatibility) + display current --lhr_tune value and current kernel in statistics table
Ethash fee is 0.65% KAWPOW fee is 1%
|
|
|
|
BurriT
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 02, 2021, 06:11:42 AM |
|
Hi,
I am just wondering, does it work only with RTX 3060 with chip GA106-300 or it can handle with RTX 3060 v2 with chip GA106-302 (this chip has a new "PCI Device ID") ? As you probably know the "new" chip is not compatible with 470.05 driver.
|
|
|
|
SkyWalker123
Newbie
Offline
Activity: 8
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 06, 2021, 06:17:33 AM |
|
I am new and started mining two weeks ago. I have 2 AMD 6600 XT and 1 AMD 6700 XT and am using gminer v2.68.
At beginning I got screen display as following:
+---+-------+----+-----+-----------+------+----+-----+-----+-------------+ | ID GPU Temp Fan Speed Shares Core Mem Power Efficiency | +---+-------+----+-----+-----------+------+----+-----+-----+-------------+ | 0 6600XT 50 31 % 32.14 MH/s 6/0/0 1182 2240 62 W 518.41 KH/W | | 1 6600XT 51 27 % 32.09 MH/s 9/0/0 1166 2240 60 W 534.86 KH/W | | 2 6700XT 48 34 % 46.78 MH/s 14/0/0 1513 2138 126 W 371.26 KH/W | | 111.01 MH/s 29/0/0 248 W 447.63 KH/W | +---+-------+----+-----+-----------+------+----+-----+-----+-------------+
But later, I am not sure what I changed and the Temp, Fan Speed, ..., info don't show up anymore. I got this:
+---+-------+----+---+-----------+------+----+---+-----+-----------+ | ID GPU Temp Fan Speed Shares Core Mem Power Efficiency | +---+-------+----+---+-----------+------+----+---+-----+-----------+ | 1 6600XT N/A 0 % 32.23 MH/s 1/0/0 0 0 N/A N/A | | 2 6600XT N/A 0 % 32.19 MH/s 1/0/0 0 0 N/A N/A | | 3 6700XT N/A 0 % 47.15 MH/s 0/0/0 0 0 N/A N/A | | 111.56 MH/s 2/0/0 | +---+-------+----+---+-----------+------+----+---+-----+-----------+
Here is my .bat file setting:
miner --algo ethash -- server us2.ethermine.org:4444 --user xxxxx --logfile log.txt --device 1 2 3 --cuda 0 pause
Can anyone give me a help?
Thanks
|
|
|
|
FloridaKid
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 375
Merit: 15
$CYBERCASH METAVERSE
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 06, 2021, 10:18:27 AM |
|
I've never used Gminer before but now I think I should give it a try but I don't have new AMD GPUs like 6800XT or 6600XT will AMD GPUs like RX Vega 56 cards work on Gminer? Anyone has experience using this card with Gminer? If yes how is the performance?
|
|
|
|
Mare76
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 08, 2021, 08:06:40 AM |
|
There is no --mvddc command for memory voltage ?
|
|
|
|
scaramanga_gold
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 09, 2021, 10:07:35 AM Last edit: October 09, 2021, 05:00:52 PM by scaramanga_gold |
|
Be aware! gminer 2.67 trying to connect 3rd-party IP - 81.4.110.148 at start. If you will try to deny this connection with Firewall - miner will not start. I've opened issue on the official github page, but still no answer from devs. It's not devfee pool IP. It's some unknown suspicious IP to which private information can be transmitted from your PC. p.s. Gminer 2.66 works perfect with block all ips except of my Pool's IP.
This is indeed strange. I used wireshark to capture the outgoing packets. gminer initiates a TCP handshake during startup to 81.4.110.148:8443 but besides that, nothing is being sent. I've let it run for an hour or so. Having said that, blocking this ip, everything works as usual for me. Probably just a leftover by the devs. edit: this is not new. check this one: https://bitcointalk.org/index.php?topic=5034735.msg55618124#msg55618124
|
|
|
|
SkyWalker123
Newbie
Offline
Activity: 8
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 14, 2021, 04:50:55 AM |
|
My mining rig uses AMD Ryzen 3 1200 Desktop Processor and the memory size is 8G. I was running 3 AMD 6600XT cards without any problems. Today I tried to add 3 more 6600XT, I got the errors:
21:35:28 GPU0: Generating DAG for epoch #447 [Single Buffer 4600 MB] 21:35:28 Error on GPU0: Failed to allocate memory buffer 21:35:28 Stopped Mining on GPU0 21:35:28 Miner terminated, watchdog will restart process after 10 seconds
I did some tests and found out that my rig can only run 3 cards, even if I add 1 more, it failed and got the errors.
Does anyone know the "Failed to allocate memory buffer" is because I only have 8G system memory? Or any other meaning?
Thanks
|
|
|
|
willi9974
Legendary
Offline
Activity: 3528
Merit: 2815
Escrow Service
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 14, 2021, 05:28:31 AM |
|
Can you post here your hardware of LHR card and your hashrate? An overview of which GPU has which performance would be very nice https://bitcointalk.org/index.php?topic=5365577.0
|
Hier könnte Ihre Werbung stehen // Your advertising could be placed here
|
|
|
SkyWalker123
Newbie
Offline
Activity: 8
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 14, 2021, 05:51:08 AM |
|
My mining rig uses AMD Ryzen 3 1200 Desktop Processor and the memory size is 8G. I was running 3 AMD 6600XT cards without any problems. Today I tried to add 3 more 6600XT, I got the errors:
21:35:28 GPU0: Generating DAG for epoch #447 [Single Buffer 4600 MB] 21:35:28 Error on GPU0: Failed to allocate memory buffer 21:35:28 Stopped Mining on GPU0 21:35:28 Miner terminated, watchdog will restart process after 10 seconds
I did some tests and found out that my rig can only run 3 cards, even if I add 1 more, it failed and got the errors.
Does anyone know the "Failed to allocate memory buffer" is because I only have 8G system memory? Or any other meaning?
Thanks
Fixed the problems. I tried PhoemixMiner and it gave more details about the errors. I increased the Window Page Size to Min 20G and Max 30G, the problems solved. Now I can run 6 GPUs without any issues.
|
|
|
|
palanzana
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 14, 2021, 09:48:15 AM |
|
i have this error ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) miner.exe --algo ethash --server eu1.ethermine.org:4444 --user 0x9372ea857bf0902c631bbc2ca956ccadf752c986.rig pause https://i.ibb.co/jTydFJK/Cattura.jpg
|
|
|
|
|