|
gt_addict
|
 |
April 17, 2019, 08:37:12 AM |
|
You just need "mood" lighting is all. Looks like a noctua redux fan?
Thats the term I was looking for, some nice green “mood lighting”  Yea its a 1600rpm 92mm redux fan which does the job, well im going to swap it for a 92mm 2000rpm arctic CO version (same grey) as ive up’d the freq since it was first built and shes just about keeping them cool enough. |
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
|
|
|
"If you don't want people to know you're a scumbag then don't be a scumbag." -- margaritahuyan
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
dashiva
Newbie
 Offline
Activity: 3
Merit: 0
|
|
April 18, 2019, 12:59:39 AM
Last edit: April 18, 2019, 04:15:11 AM by frodocooper |
|
cgminer probably can't claim the device.
try disabling any possibly active vcp modem drivers...
This worked! Thank you. |
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4102
Merit: 7764
'The right to privacy matters'
|
|
April 18, 2019, 01:18:03 AM |
|
You just need "mood" lighting is all. Looks like a noctua redux fan?
That plastic color certainly looks like noctua. |
|
|
|
|
Valnurat
|
|
April 18, 2019, 08:59:50 AM |
|
Putting the whole path in worked for me, but I had to work with a different autostart file to get everything to run. Try this: open a terminal cd .config/lxsession/LXDE-pi
nano autostart
Then add @/usr/bin/lxterminal --geometry=90x35 -e /home/pi/cgminer/cgminer to the last line. Save and reboot. I tried this, but now my headless pi is just black when I use VNC.  |
|
|
|
|
|
gt_addict
|
|
April 22, 2019, 07:57:58 PM
Last edit: April 23, 2019, 10:52:13 AM by frodocooper |
|
Just noticed this new version of cgminer. I'm currently trying it out and noticing its not performing the same as the previous version "......363d879" . Previously I was able to get to 600m on all 5 sticks. Now shes struggling to break 200m. .bat file is the same as I was using with the previous version. I know I can switch back no problems. Just bringing it to your attention VH  If theres any potential problem then trust my PC to find it out lol. |
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
Gage-Miner
Newbie
Offline
Activity: 9
Merit: 0
|
|
April 22, 2019, 10:11:21 PM
Last edit: April 23, 2019, 10:57:55 AM by frodocooper |
|
Hey  I just finished my optimized air flux box for my gekko newpac Work only for the gekkoscience USB HUB (the best...) For a best cooling i removed the top HUB cache. Due to my printer size bed i needed to cut the box to 8 parts, you need to glue them, but it work Here is the stl files if you want.... You need two 9 cm classic PC fans, the up fan let in the fresh air, and the second fan get out the hot... Filax, How much would you charge to make a box like yours? Can you tell me what program you are using to do the print job and the steps i need to follow? I have access to a 3d printer at work but have never used it? Thank you in advance. -Josh Gage |
|
|
|
|
zxhaxdr
Newbie
Offline
Activity: 47
Merit: 0
|
|
April 24, 2019, 07:15:34 PM
Last edit: April 25, 2019, 02:36:36 AM by frodocooper |
|
Hi everyone, Got a newpac miner. Running on Ubuntu 18.04. CGminer was freshly built. However, it kept looping at GSH 0: found 0 chip(s)
GSH 0: Toggling ASIC nRST to reset
Also, two LEDs are lighting constantly. The frequency was set to the lowest 50Mhz and tried to adjust Voltage but it's still doesn't work. Can anyone help? Thanks. |
|
|
|
|
|
vh (OP)
|
|
April 24, 2019, 07:28:39 PM
Last edit: April 25, 2019, 02:36:56 AM by frodocooper |
|
Use a powered hub.
Could be DoA, but possible low power condition keeping it from responding.
Catch 22 on that.
The software can't set the frequency of the chip to use lower power if the chips don't have the needed power to start up.
You might have some luck if you set the potentiometer to 3 o'clock.
Use a powered hub, it's better for your miner and the PC port.
|
|
|
|
zxhaxdr
Newbie
Offline
Activity: 47
Merit: 0
|
|
April 24, 2019, 08:04:08 PM
Last edit: April 25, 2019, 02:37:12 AM by frodocooper |
|
Use a powered hub.
Could be DoA, but possible low power condition keeping it from responding.
Catch 22 on that.
The software can't set the frequency of the chip to use lower power if the chips don't have the needed power to start up.
You might have some luck if you set the potentiometer to 3 o'clock.
Use a powered hub, it's better for your miner and the PC port.
Hi thank you for your reply. I don't have a powered hub at the moment I'll try it later. After turning the potentiometer to 3 o'clock it now measures around 6.8kΩ is this correct? Is it normal that the chips heat up when it's idle? Cheers. |
|
|
|
|
419mining
Copper Member
Full Member
Offline
Activity: 190
Merit: 111
https://www.419mining.com
|
|
April 24, 2019, 10:26:58 PM
Last edit: April 25, 2019, 02:37:34 AM by frodocooper |
|
Filax,
How much would you charge to make a box like yours? Can you tell me what program you are using to do the print job and the steps i need to follow? I have access to a 3d printer at work but have never used it?
Thank you in advance.
-Josh Gage
We offer a simpler setup, you can buy it here with fans, https://www.419mining.com/shop/misc/70mm-fan-assembly-and-fans/ OR 3d print it yourself, here: https://www.thingiverse.com/thing:3270261. |
|
|
|
akdgofktlqkf
Newbie
Offline
Activity: 2
Merit: 0
|
|
April 27, 2019, 06:44:49 PM |
|
I just received NewPac stickminer and everytime I plug in it shows 'The driver installation failed'.
|
|
|
|
|
|
gt_addict
|
|
April 27, 2019, 07:02:15 PM |
|
I just received NewPac stickminer and everytime I plug in it shows 'The driver installation failed'.
Have you run zadig? what machine are you using (windoze/mac/linux)? |
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
akdgofktlqkf
Newbie
Offline
Activity: 2
Merit: 0
|
|
April 27, 2019, 07:12:53 PM |
|
yes i did use zadig and I use windows 10.
|
|
|
|
|
|
gt_addict
|
|
April 27, 2019, 10:03:24 PM |
|
yes i did use zadig and I use windows 10.
And how are you connecting the gekko? Usb hub (powered or not?), port on the pc/laptop, if so usb2 port or usb3? When you used zadig you selected the gekko and changed the driver ok? |
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
419mining
Copper Member
Full Member
Offline
Activity: 190
Merit: 111
https://www.419mining.com
|
|
April 27, 2019, 10:29:47 PM |
|
yes i did use zadig and I use windows 10.
Can you share a screen of the error? A capture of zadig with the NewPac selected would be beneficial too. |
|
|
|
K21000
Member
Offline
Activity: 71
Merit: 11
|
|
April 29, 2019, 05:58:03 AM |
|
Does the official cgminer build support this miner or is the custom gekkoscience cgminer build the only way to mine with this?
|
|
|
|
|
|
gt_addict
|
|
April 29, 2019, 06:17:28 AM |
|
Does the official cgminer build support this miner or is the custom gekkoscience cgminer build the only way to mine with this?
This is the official version but with “extras” to help the gekkos perform at their best. |
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
K21000
Member
Offline
Activity: 71
Merit: 11
|
|
April 29, 2019, 07:15:30 AM
Last edit: April 29, 2019, 11:45:06 PM by frodocooper |
|
This is the official version but with “extras” to help the gekkos perform at their best.
Yes i already know that. What i was asking is if i downloaded the original cgminer would the newpac be picked up at all? Or is newpac support exclusive to this "improved" cgminer? |
|
|
|
|
|
gt_addict
|
|
April 29, 2019, 09:23:13 AM
Last edit: April 29, 2019, 11:45:29 PM by frodocooper |
|
Yes i already know that. What i was asking is if i downloaded the original cgminer would the newpac be picked up at all? Or is newpac support exclusive to this "improved" cgminer?
As far as im aware the latest version of the original cgminer has support for the 2pac but not any subsequent iterations of the gekkoscience products. All other asics will still work with the gekko version as far as I know. So probably best to just use this version. |
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
K21000
Member
Offline
Activity: 71
Merit: 11
|
|
April 29, 2019, 09:33:52 AM
Last edit: April 29, 2019, 11:45:47 PM by frodocooper |
|
As far as im aware the latest version of the original cgminer has support for the 2pac but not any subsequent iterations of the gekkoscience products. All other asics will still work with the gekko version as far as I know. So probably best to just use this version.
Okay thanks for the clarification. |
|
|
|
|
|
