zvisha
|
|
January 16, 2015, 06:18:19 PM |
|
Did anybody tried to run SP30 more energy efficiently? If yes, care to share the settings and what the energy consumption/hashing speed will result? I have my units in hosting, so cannot play with settings as easily as with SP20 at home.
I tried a quick test and I used start voltage .60 and set the max PSUs to 750W and it worked just fine. Can't remember stats because as I said it was just a quick test. Maybe I will have more spare time in week-end. I will go over requests next week. I recomend using voltage only (set start and max to same values or give 5 millivolt between them) till you get the performance you want. If you set too low system will not start. Keep the psu wattage as is since it will never be reached if you set max volts low enough.
|
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
|
January 16, 2015, 06:21:20 PM |
|
Did anybody tried to run SP30 more energy efficiently? If yes, care to share the settings and what the energy consumption/hashing speed will result? I have my units in hosting, so cannot play with settings as easily as with SP20 at home.
I tried a quick test and I used start voltage .60 and set the max PSUs to 750W and it worked just fine. Can't remember stats because as I said it was just a quick test. Maybe I will have more spare time in week-end. I will go over requests next week. I recomend using voltage only (set start and max to same values or give 5 millivolt between them) till you get the performance you want. If you set too low system will not start. Keep the psu wattage as is since it will never be reached if you set max volts low enough. Whats new in 2.6.1 zvi?
|
|
|
|
Tigggger
Legendary
Offline
Activity: 1098
Merit: 1000
|
|
January 16, 2015, 06:29:53 PM |
|
Did anybody tried to run SP30 more energy efficiently? If yes, care to share the settings and what the energy consumption/hashing speed will result? I have my units in hosting, so cannot play with settings as easily as with SP20 at home.
A few that I tried, the green was the optimal until the recent price drop, now they are all offline, UK electric rates kill any chance of profit
|
|
|
|
sjc1490
|
|
January 16, 2015, 06:44:42 PM |
|
aclass and tupsu Thanks, that fixed it.
|
BTC ADDRESS: 12Qwd8VKLQ4xF44ytHXBpCAKuF9VknG4X2
|
|
|
bobsag3
|
|
January 16, 2015, 07:36:41 PM |
|
Did anybody tried to run SP30 more energy efficiently? If yes, care to share the settings and what the energy consumption/hashing speed will result? I have my units in hosting, so cannot play with settings as easily as with SP20 at home.
A few that I tried, the green was the optimal until the recent price drop, now they are all offline, UK electric rates kill any chance of profit Thanks for that, very helpful.
|
|
|
|
Biodom
Legendary
Offline
Activity: 3850
Merit: 4227
|
|
January 16, 2015, 07:39:34 PM |
|
Did anybody tried to run SP30 more energy efficiently? If yes, care to share the settings and what the energy consumption/hashing speed will result? I have my units in hosting, so cannot play with settings as easily as with SP20 at home.
A few that I tried, the green was the optimal until the recent price drop, now they are all offline, UK electric rates kill any chance of profit Thanks, this will give me some options.
|
|
|
|
zvisha
|
|
January 16, 2015, 09:43:09 PM |
|
Did anybody tried to run SP30 more energy efficiently? If yes, care to share the settings and what the energy consumption/hashing speed will result? I have my units in hosting, so cannot play with settings as easily as with SP20 at home.
I tried a quick test and I used start voltage .60 and set the max PSUs to 750W and it worked just fine. Can't remember stats because as I said it was just a quick test. Maybe I will have more spare time in week-end. I will go over requests next week. I recomend using voltage only (set start and max to same values or give 5 millivolt between them) till you get the performance you want. If you set too low system will not start. Keep the psu wattage as is since it will never be reached if you set max volts low enough. Whats new in 2.6.1 zvi? Stability. Recomended.
|
|
|
|
mavericklm
|
|
January 16, 2015, 09:48:02 PM |
|
I will go over requests next week. I recomend using voltage only (set start and max to same values or give 5 millivolt between them) till you get the performance you want. If you set too low system will not start. Keep the psu wattage as is since it will never be reached if you set max volts low enough. Then give up on the max wattage settings, and make the max watt appear on the left side of the voltage settings, calculated on the voltage that we set!
|
|
|
|
opentoe
Legendary
Offline
Activity: 1274
Merit: 1000
Personal text my ass....
|
|
January 17, 2015, 01:28:39 AM |
|
thanks. you're right i really dont spend much time on the forum anymore. just a quick look in to see any urgent updates but mostly im only here when stuff goes wrong. a bit gutted i missed the opportunity to +ROI on my SPTech rigs, as im still MONTHS away from reaching BE point. and i'll be shutting down my ants in the next week or two leaving me with just 1x SP30 & 2x SP20/E im looking fwd to the lowered decibels but not enjoying the lower income at all!! but i cant justify buying more hardware now and my BTC buy in price was double digits so i dont feel like buying more BTC no matter how low some people say it is. triple figs just aint 'that' low to me. oh to see >500 again... I missed the paycoin gig also, so you aren't the only one. It looked a bit confusing to me, but for those returns people were getting I would have figured it out somehow. That's about what everyone is doing right now, powering off their units. I doubt anyone would even be interested in buying a couple 2 SP10's. What to do with them. Come on bitcoin, give us a break and another long ride, one more time before you die into the black hole.
|
|
|
|
mdude77
Legendary
Offline
Activity: 1540
Merit: 1001
|
|
January 17, 2015, 12:36:21 PM |
|
Let us know what you want to see in Spondoolies-Tech's firmware… We are open to suggestions! What do you want to see implemented in our next firmware releases? We want to hear from you, although we cannot make any promises to implement any suggestion, we will try out best to make it work. Post suggestions here in the thread…
I would like to see target temperature support whereby the firmware constantly adjusts fanspeed to the lowest possible RPM that will maintain the device just below a target temperature. Where cgminer drivers have had the ability to adjust fanspeed continuously, I have coded up this feature into them but the fanspeed control is not within cgminer on sp gear. I'm all for that. And if you're going to go there, please include the fan speed in the output API. M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
lulu2003
|
|
January 17, 2015, 01:13:03 PM |
|
could it be possible to gather the firmware suggestions in a list and edit that list and extend?
hope I did not miss some:
- true fan speed control by target temp - scheduling certains mining speeds(voltages) - individual voltage limits as right now for the back chips - Timezone "bug"? first page graphs are always UTC? - enable API in own subnet/net by web interface - include fan speed in API datasets - change host name in web interface - other pool options than failover only - Graphs on the first webguy page, there should be a button to disable some/all of them. - Poll page could be managed on the front page with up&down buttons on each pool - GUI switches to turn off SSH would also be a good thing, plus for advanced users some sort of iptables in the OS for security.
- show ASIC Stats
|
|
|
|
Guy Corem (OP)
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
|
January 17, 2015, 01:53:23 PM |
|
could it be possible to gather the firmware suggestions in a list and edit that list and extend?
hope I did not miss some:
- true fan speed control by target temp - scheduling certains mining speeds(voltages) - individual voltage limits as right now for the back chips - Timezone "bug"? first page graphs are always UTC? - enable API in own subnet/net by web interface - include fan speed in API datasets - change host name in web interface - other pool options than failover only - Graphs on the first webguy page, there should be a button to disable some/all of them. - Poll page could be managed on the front page with up&down buttons on each pool - GUI switches to turn off SSH would also be a good thing, plus for advanced users some sort of iptables in the OS for security.
- show ASIC Stats
Please Create editable Google Sheet. Keep a field with remarks / comments for Zvisha to reply. Guy
|
|
|
|
lulu2003
|
|
January 17, 2015, 03:26:45 PM |
|
could you/someone else do?! I have no clue how to do without google account.
|
|
|
|
opentoe
Legendary
Offline
Activity: 1274
Merit: 1000
Personal text my ass....
|
|
January 17, 2015, 03:42:48 PM |
|
|
|
|
|
lulu2003
|
|
January 17, 2015, 04:08:22 PM |
|
agree, I doubt it is possible to let anonymous users add new rows but not edit others...?!
|
|
|
|
seriouscoin
|
|
January 17, 2015, 06:08:10 PM |
|
could it be possible to gather the firmware suggestions in a list and edit that list and extend?
hope I did not miss some:
- true fan speed control by target temp - scheduling certains mining speeds(voltages) - individual voltage limits as right now for the back chips - Timezone "bug"? first page graphs are always UTC? - enable API in own subnet/net by web interface - include fan speed in API datasets - change host name in web interface - other pool options than failover only - Graphs on the first webguy page, there should be a button to disable some/all of them. - Poll page could be managed on the front page with up&down buttons on each pool - GUI switches to turn off SSH would also be a good thing, plus for advanced users some sort of iptables in the OS for security.
- show ASIC Stats
VERY IMPORTANT for anyone with variable electric rate (peak and offpeak hrs) Better yet, an stop and start scheduling for anyone who can only mine at night (offpeak)
|
|
|
|
btcgnome
Member
Offline
Activity: 66
Merit: 10
|
|
January 17, 2015, 07:23:43 PM |
|
My SP30's hosted at SPTech is reported by slush to have a 24-hr hashrate of 3.007 Th/s. This seems totally wrong seems the advertised speed is at 4.5 Th/s for SP30's.
I have SP31's running somewhere else but that's being reported at 4.7 Th/s (advertized speed 4.8 Th/s)
Is anyone else's SP30's running a 24-hr hashrate of 3.0 Th/s?
|
|
|
|
mdude77
Legendary
Offline
Activity: 1540
Merit: 1001
|
|
January 17, 2015, 07:44:57 PM |
|
My SP30's hosted at SPTech is reported by slush to have a 24-hr hashrate of 3.007 Th/s. This seems totally wrong seems the advertised speed is at 4.5 Th/s for SP30's.
I have SP31's running somewhere else but that's being reported at 4.7 Th/s (advertized speed 4.8 Th/s)
Is anyone else's SP30's running a 24-hr hashrate of 3.0 Th/s?
It's been a long time since I've heard anyone say anything good about slush's pool. Everything I heard recently is you want to avoid it, because it has a flawed payout mechanism. Maybe try Kano's ckpool? https://bitcointalk.org/index.php?topic=789369.0;topicseenM
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
RoadStress
Legendary
Offline
Activity: 1904
Merit: 1007
|
|
January 17, 2015, 07:47:08 PM |
|
My SP30's hosted at SPTech is reported by slush to have a 24-hr hashrate of 3.007 Th/s. This seems totally wrong seems the advertised speed is at 4.5 Th/s for SP30's.
I have SP31's running somewhere else but that's being reported at 4.7 Th/s (advertized speed 4.8 Th/s)
Is anyone else's SP30's running a 24-hr hashrate of 3.0 Th/s?
Send them an e-mail to check your miner. Problem solved.
|
|
|
|
luki19994
Member
Offline
Activity: 99
Merit: 10
|
|
January 17, 2015, 08:05:31 PM |
|
hi my sp31 runs with 4,77 TH/S last 10 weeks
|
|
|
|
|