bgibso01
Legendary
Offline
Activity: 1218
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 31, 2014, 11:56:34 PM |
|
Anybody know where to download SP20 firmware? It shows in the gui that you can update from file. After going down to 2.5.12 and now my machine thinks its a Dawson, I would like to reload the correct firmware. You don't get those options after installing the 2.5.12.
TIA.
|
|
|
|
stan258
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 01, 2015, 12:12:45 AM |
|
Anybody know where to download SP20 firmware? It shows in the gui that you can update from file. After going down to 2.5.12 and now my machine thinks its a Dawson, I would like to reload the correct firmware. You don't get those options after installing the 2.5.12.
TIA.
Check spondoolies support blog. This came up many pages back in the thread. http://www.spondoolies-tech.com/blogs/technical-blog
|
|
|
|
|
bgibso01
Legendary
Offline
Activity: 1218
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 01, 2015, 12:25:17 AM |
|
Yes it does. Thanks I've tried the FR and that didn't change the FW. I found the tech blog and how to create a recovery sd. Except after doing it, noticed it was a micro SD slot. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Had to head home, so was hoping I could just load a correct firmware version from file since I can do that remotely. Haven't been able to locate their firmware files on their website or github yet.
|
|
|
|
Duce
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 01, 2015, 12:40:44 AM |
|
Yes it does. Thanks I've tried the FR and that didn't change the FW. I found the tech blog and how to create a recovery sd. Except after doing it, noticed it was a micro SD slot. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Had to head home, so was hoping I could just load a correct firmware version from file since I can do that remotely. Haven't been able to locate their firmware files on their website or github yet. I looked for you as well but could not find them available. I am sure SP will provide support but they are in the middle of the New Year right now. Looks like the micro SD route is your best bet though.
|
|
|
|
bgibso01
Legendary
Offline
Activity: 1218
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 01, 2015, 12:43:46 AM |
|
Yes it does. Thanks I've tried the FR and that didn't change the FW. I found the tech blog and how to create a recovery sd. Except after doing it, noticed it was a micro SD slot. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Had to head home, so was hoping I could just load a correct firmware version from file since I can do that remotely. Haven't been able to locate their firmware files on their website or github yet. I looked for you as well but could not find them available. I am sure SP will provide support but they are in the middle of the New Year right now. Looks like the micro SD route is your best bet though. Appreciate your looking. I'd call it a definite bug though if the SP20 let's you select SP10 firmware ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
Guy Corem (OP)
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 01, 2015, 07:12:46 AM |
|
Yes it does. Thanks I've tried the FR and that didn't change the FW. I found the tech blog and how to create a recovery sd. Except after doing it, noticed it was a micro SD slot. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Had to head home, so was hoping I could just load a correct firmware version from file since I can do that remotely. Haven't been able to locate their firmware files on their website or github yet. I looked for you as well but could not find them available. I am sure SP will provide support but they are in the middle of the New Year right now. Looks like the micro SD route is your best bet though. Appreciate your looking. I'd call it a definite bug though if the SP20 let's you select SP10 firmware ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) We'll check the issue, but as Duce wrote, follow the micro SD recovery procedure in the technical blog.
|
|
|
|
|
Powell
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 486
Merit: 262
rm -rf stupidity
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 01, 2015, 09:40:33 AM |
|
Does Zv or anyone have a working log of what change are in the FW updates? Like I have 2x SP20 on .61 and 2x SP20 on .64 (Soon to be 6x SP20 on .64 come Monday).
Just didn't see anything and the little bit of nerd in me wants to just see the random change log lol!
|
|
|
|
zvisha
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 01, 2015, 10:11:06 AM |
|
Does Zv or anyone have a working log of what change are in the FW updates? Like I have 2x SP20 on .61 and 2x SP20 on .64 (Soon to be 6x SP20 on .64 come Monday).
Just didn't see anything and the little bit of nerd in me wants to just see the random change log lol!
All changes can be viewd in github. Last version adds some % flags to the cgminer.conf.
|
|
|
|
Powell
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 486
Merit: 262
rm -rf stupidity
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 01, 2015, 10:16:49 AM |
|
Does Zv or anyone have a working log of what change are in the FW updates? Like I have 2x SP20 on .61 and 2x SP20 on .64 (Soon to be 6x SP20 on .64 come Monday).
Just didn't see anything and the little bit of nerd in me wants to just see the random change log lol!
All changes can be viewd in github. Last version adds some % flags to the cgminer.conf. Forgot about github lol! Thank ya sir! Weird question and looking at some of the SP20 review threads is there a reason Loop 2 usually runs less Wattage than any of the others? On all of my 4 current ones it does so. Not hurting anything major, just wondering.
|
|
|
|
zvisha
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 01, 2015, 12:32:26 PM |
|
Does Zv or anyone have a working log of what change are in the FW updates? Like I have 2x SP20 on .61 and 2x SP20 on .64 (Soon to be 6x SP20 on .64 come Monday).
Just didn't see anything and the little bit of nerd in me wants to just see the random change log lol!
All changes can be viewd in github. Last version adds some % flags to the cgminer.conf. Forgot about github lol! Thank ya sir! Weird question and looking at some of the SP20 review threads is there a reason Loop 2 usually runs less Wattage than any of the others? On all of my 4 current ones it does so. Not hurting anything major, just wondering. It's on the hottest place in the miner, so it can not pull as much power as the other.
|
|
|
|
zvisha
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 01, 2015, 01:41:47 PM |
|
Hi all I think that version 2.5.64 is stabler and better then most previous version and I recommend an upgrade. Older versions of SW ran ~30 days till it needed manual restart, which means that DC with 300 miners had to restart ~10 miners daily. I am trying to get the miner to get stuck not more then once every 100 days, and I hope that version 64 might achieve that.
It also has the cool feature of cgminer.conf template for IP/version/type, in formats good for all pools (with dots and text only).
|
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 01, 2015, 03:58:55 PM |
|
No problem just after updating sometimes my units require a hard power cycle. I am a distance away from my miners so I just won't do it remotely from now on.
I had the same issue with one of my 5 SP20s. I ended up having to drive 40 miles to the colo and power cycle it last night. I think it might have an issue as it will not hash over about 1570Ghs and it took a couple of power cycles to get it to come back up (the yellow light kept flashing on the front). Should I have support look at the logs on it? The one I got from the first batch thinking I would be cool won't go past 1512, 1535 if I push the voltage. I have direct cooling into the racks at 22c the units says 24 to 25c intake. The other SP20'S push 1600 plus in the same rack. Everything checks out ok on the lemon. It may have been banged up from shipping or just slower Asics compared to what's shipping now. Sucks as it cost a **** load. And this one needed a hard power cycle a few times when I dabbled with pool settings. 40 miles sucks. At least gas is cheaper these days. I'm about 30 mins no traffic. For the led check if you have the led flash option in the gui. Mate get a PDU, then you can reboot remotely.
|
|
|
|
jackbox
Legendary
Offline
Activity: 1246
Merit: 1024
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 01, 2015, 06:11:48 PM |
|
For those about compairing Bitmaintech to spondoolies. This is my DOA unit and not only does bitmain refuse to accept a return or refund me, but they continue to say it was something I did with my power. Mind you smoke was pouring out of this unit, and would have started a fire, but luckily I as in the room at the time it started. I had 2 DOA units, and I tried to return both within DAYS. Here is one for your collection. The 2nd DOA miner just made a spark when plugged in, nothing else. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi1318.photobucket.com%2Falbums%2Ft656%2Fparkstreet1234%2F20141229_215515_zps22803daf.jpg&t=665&c=Mz4TxdvxxBYWFg) If smoke was "pouring" out of the unit why is there no evidence of fire or smoke in this photo? Last week my PSU did just that. It had an electrical fire and I smelled smoke. When I turned it off and took off the plug there was clear evidence of fire and smoke. I see none in this photo.
|
|
|
|
mavericklm
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 01, 2015, 06:12:50 PM |
|
take low quality, 2months used and sold as new, btimain hardware to bitmain threads! ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 01, 2015, 06:32:53 PM |
|
The smoke was electronic smoke, It was making the air very toxic and there was no way for me to photographic it. Perhaps if I bought the unit outside and did it. The smoke smelled so bad, I really couldn't describe it, not only was it electronic smell, it was sort of like a regular fire smell as well. Nothing wrong with the power supply G2 1300W EVGA with 10 year warranty. It is working fine now with other miners right now. I didn't take the entire thing apart either, the other side of the board is probably black, but I didn't want to spend more time on this. I shipped them back expecting new units, but I was told they would not accept a return and send me a new unit. For those about compairing Bitmaintech to spondoolies. This is my DOA unit and not only does bitmain refuse to accept a return or refund me, but they continue to say it was something I did with my power. Mind you smoke was pouring out of this unit, and would have started a fire, but luckily I as in the room at the time it started. I had 2 DOA units, and I tried to return both within DAYS. Here is one for your collection. The 2nd DOA miner just made a spark when plugged in, nothing else. http://s1318.photobucket.com/user/parkstreet1234/media/20141229_215515_zps22803daf.jpg.htmlIf smoke was "pouring" out of the unit why is there no evidence of fire or smoke in this photo? Last week my PSU did just that. It had an electrical fire and I smelled smoke. When I turned it off and took off the plug there was clear evidence of fire and smoke. I see none in this photo. seems strange that there would be smoke without fire. As was said, usually smoke or a bad smell can be tracked to a leaking component (maybe this cap) and usually stains or blackened spots/shorts visible where they occurred. keep on bitmain, they should RMA for you, though seems strange you got two DOA units together
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4214
Merit: 8362
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 01, 2015, 06:50:07 PM |
|
your cable on the psu may be bad
your psu can't provide all the power needed to mine.
it looks like you have 3 good cables doing 315gh each
1 cable with no power doing zip.
your watt settings are 215 a board what psu do you use?
check cables.
try clocking lower if cables are good.
|
|
|
|
Biodom
Legendary
Offline
Activity: 3850
Merit: 4231
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 01, 2015, 06:50:27 PM |
|
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FWRuRIS8.png&t=665&c=BpKhZkRe4dCO_g) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FCkp9OZR.png&t=665&c=re8tVei96SZ6BQ) possible causes? im shattered but will checkin for support/opinions when i return from slumber e2a - after 7 months of daily argue, bitmain paid my compensation. dont give up mrpark!! It says "disable us one by one" in one of the loops. You or support might still make it a go if only one asic is malfunctioning (1/60=1.5%). How long did it stay in this state?
|
|
|
|
edgar
Legendary
Offline
Activity: 1848
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 01, 2015, 07:21:03 PM Last edit: January 01, 2015, 07:45:30 PM by edgar |
|
Thx guys, one cable end is fried, other 3 are slightly scorched.
shes running slightly better with offending cable removed, but the melted shroud is stuck inside the sp20 connector so i cant plug in another cable...
will have a proper fiddle later - 0230 here.
confusing as psu was pulling <900w while previously running MUCH higher watts without issue. (>1150w)
i'll upload pic in a minute. meh. you all know what scorched connectors look like
|
|
|
|
|