[ANN] ¤ DMD Diamond 3.0 | Scarce ¤ Valuable ¤ Secure | PoS 3.0 | Masternodes 65%

[marcous]

can't downoad windows wallet qt, http://sourceforge.net/error-404.html?project=diamonddmd  
can someone give me link for working DMD wallet for windows?

Thanks

sourceforge seems to have some temporay problems

but u can find all wallets here too
http://diamond.danbo.bg/downloads/
but make sure u choose the correct latest one 2.0.4

and i suggest u make sure ur diamond.conf have at least following lines

Example entries in the config file:

listen=1
noirc=1
addnode=193.68.21.19
addnode=54.191.208.14
addnode=54.255.133.30
addnode=54.86.164.216
bantime=600

and sync the chain can need some time
u can skip 1 1/2 years syncing by use as example this synced blockchain
https://mega.co.nz/#!yFFyFBgT!0sXA5k8DAwyiJVNsXo8qMXJgX34o81cTnGUevALdfzc
then only 4 months are left to sync

i see its time to upload a new copy of synced blockchain this one is pretty old but better than nothing

wow thank you, fast respond 

[1714724487]

1714724487

[stoody]

hi all:) i was wondering if there is a way to see how many dmd have been minted in the reactor??  i know its just started but when it gets in full swing it would be nice to see how its performing thanks

Hi stoody,

This should show mintings in the transaction list when reactor is up and running:

https://chainz.cryptoid.info/dmd/address.dws?107821.htm

Regards

chilo

thanks mate for ur reply ill book mark it and watch it grow

[cryptonit]

wow thank you, fast respond  

thats how we are  

we hate coins where u have to wait 4 weeks to get a word from dev team
at dmd diamond u can be sure that everyday we check the BTT thread and try to answer questions

but this mindset did spread in community and most times other friendly members already answered first

its nice to see we are all a bunch of people who work together and have a common goal

to make this a success story

when i did choose DMD diamond nearly 1 1/2 years ago it was  after a intense analysis of existing coins

which one have the potential

and i did choose well

yes we not where we wana be already

but in this timeframe endless coins did come and go

while we are still here and working on our break trough which will be dmd v3

and more and more people realize this and how different dmd is

its just sad so many had to burn their fingers with other coins before they finally found dmd

and lot not even came into that stage and left crypto community after their first bad experience

this is one of the reason why crypto business grow so slow because to many people leave scared after hurt

[utahjohn]

its just sad so many had to burn their fingers with other coins before they finally found dmd

Sadly I joined DMD at beginning and left when PoS failed V1, but I kept my coins only to see it had later been resurected by a good dev team in V2 and got PoS to work properly .  (I know DMD history I read thread daily).
Let's hope community input will see major changes in V3

[utahjohn]

A gift to all Tahiti card users : https://realhet.wordpress.com/ I helped develop this and benchmark it, I am mining 26MHs on a 280x
Look for DiamondTahiti.elf in downloads area.  Rename to match your current *.bin in sgminer.  Restart sgminer to use new bin.

NOTE: you may have cooling issues, this kernel runs GPU very hard, gotta love Utah winter cold here but will crash GPU if it gets too hot.
Still have to run a space heater but  last year no added heat needed mining scrypt ...

[cryptonit]

we have some people working to create a russian language DMD community up and running

it would be nice if we get such a language community going for chinese language too

is there anybody in community who can write mainland chinese
(Mainland China adopted simplified Chinese characters in 1956. They are also used in Singapore. Traditional Chinese characters are used in Hong Kong, Macau and Taiwan.)
or who know people who can and are maybe interested start and maintain a dmd chinese community?

[utahjohn]

we have some people working to create a russian language DMD community up and running

it would be nice if we get such a language community going for chinese language too

is there anybody in community who can write mainland chinese
(Mainland China adopted simplified Chinese characters in 1956. They are also used in Singapore. Traditional Chinese characters are used in Hong Kong, Macau and Taiwan.)
or who know people who can and are maybe interested start and maintain a dmd chinese community?

Been to all of these countries (perhaps some unclaimed children HAHA) while I was in US Navy (maybe that is  where I got attitude/skeptic attidude) but did not learn any language, would be nice to become a larger worldwide community  Gotta keep it english speaking in main thread but other threads are welcome with a moderator to translate if needed to cross-post to this thread.

[pallas]

we have some people working to create a russian language DMD community up and running

it would be nice if we get such a language community going for chinese language too

is there anybody in community who can write mainland chinese
(Mainland China adopted simplified Chinese characters in 1956. They are also used in Singapore. Traditional Chinese characters are used in Hong Kong, Macau and Taiwan.)
or who know people who can and are maybe interested start and maintain a dmd chinese community?

Been to all of these countries while I was in US Navy but did not learn any language, would be nice to become a larger worldwide community   Gotta keep it english speaking in main thread but other threads are welcome with a moderator to translate if needed to cross-post to this thread.

I created the italian language thread but, apart from some flame because "I'm not an usual italian forum writer", there was no interest at all...
Let's hope Russians and Chineses are different.

[utahjohn]

Good to hear from u Pallas been a week or so   Some work is being done, might be adding neoscrypt to donkeypool soon, need to get some sleep LOL but then I'll work on it ...

[cryptonit]

I created the italian language thread but, apart from some flame because "I'm not an usual italian forum writer", there was no interest at all...
Let's hope Russians and Chineses are different.

i guess regulary translate announcement and news to that thread would make u a "usual italian forum writer"

but i understand that would be time consuming task

but maybe u get in touch with interesting italian speaking people

[CRYPTONAIRE]

we have some people working to create a russian language DMD community up and running

it would be nice if we get such a language community going for chinese language too

is there anybody in community who can write mainland chinese
(Mainland China adopted simplified Chinese characters in 1956. They are also used in Singapore. Traditional Chinese characters are used in Hong Kong, Macau and Taiwan.)
or who know people who can and are maybe interested start and maintain a dmd chinese community?

This post reminds me of a thought I had a while back about the DMD symbol.
The word ‘Diamond’ appears inscribed on the symbol, in English, twice.
To me, this makes no sense. 
 
In order to give DMD more appeal, to make it look and ‘feel’ a lot more global, more ‘international’ in nature, would it not be wise to inscribe the word ‘Diamond’ in a variety of languages (including English of course!).

I think there may be sufficient space for up to six (6) languages, representing a diversity of nations, continents and alphabets.

My personal preference would be :

English
Russian
Arabic
Hindi
Chinese (simplified)
Indonesian

What do people think of this? 

[pallas]

I created the italian language thread but, apart from some flame because "I'm not an usual italian forum writer", there was no interest at all...
Let's hope Russians and Chineses are different.

i guess regulary translate announcement and news to that thread would make u a "usual italian forum writer"

but i understand that would be time consuming task

but maybe u get in touch with interesting italian speaking people

True, but I'm used to turn to "english mode" once I power on the PC, since I was a kid ;-)
Sometimes I find it difficult to even write a good post in italian, even though I'm mother tongue, because I don't know the italian translation of many technical terms.
I believe we would save a lot of resources if everybody would concentrate on learning a bit of english instead of translating programs, documentation, etc. but that's another story ;-)

[DMDCreeper]

A gift to all Tahiti card users : https://realhet.wordpress.com/ I helped develop this and benchmark it, I am mining 26MHs on a 280x
Look for DiamondTahiti.elf in downloads area.  Rename to match your current *.bin in sgminer.  Restart sgminer to use new bin.

NOTE: you may have cooling issues, this kernel runs GPU very hard, gotta love Utah winter cold here but will crash GPU if it gets too hot.
Still have to run a space heater but  last year no added heat needed mining scrypt ...

Thanks, Utah.  I tried this and got an additional 5 mh/s out of a 280x and yes, it runs hotter.  I have fans running at 100% to cool it and its running about 3 degrees C hotter but still only 71 degrees C.  I am not overclocking the card at the moment.  The 280x seems to deliver less performance for the additional power used when overclocked - power consumption exceeds performance improvement. 

I can try this on the R9 290 but those already run ridiculously hot and I am hesitant.  I fried one PSU/PCI-e cable already pushing them too hard. I am running out of power supplies and frankly, given the value of BTC right now, I don't want to increase my investment right now.

[DMDCreeper]

A gift to all Tahiti card users : https://realhet.wordpress.com/ I helped develop this and benchmark it, I am mining 26MHs on a 280x
Look for DiamondTahiti.elf in downloads area.  Rename to match your current *.bin in sgminer.  Restart sgminer to use new bin.

NOTE: you may have cooling issues, this kernel runs GPU very hard, gotta love Utah winter cold here but will crash GPU if it gets too hot.
Still have to run a space heater but  last year no added heat needed mining scrypt ...

Thanks, Utah.  I tried this and got an additional 5 mh/s out of a 280x and yes, it runs hotter.  I have fans running at 100% to cool it and its running about 3 degrees C hotter but still only 71 degrees C.  I am not overclocking the card at the moment.  The 280x seems to deliver less performance for the additional power used when overclocked - power consumption exceeds performance improvement. 

I can try this on the R9 290 but those already run ridiculously hot and I am hesitant.  I fried one PSU/PCI-e cable already pushing them too hard. I am running out of power supplies and frankly, given the value of BTC right now, I don't want to increase my investment right now.

Following up on my prior comments, I tried this with some of my R9 290s and again I got about a 4-5 mh/s boost from each card and again, I am not overclocking - although the R9 290s are better powerwise when overclocked than the 280x.  I also looked at power consumption and it looks like each card consumes about 3-4 watts for the additional 4 mh/s which I think is very positive.   

In summary my R9 280x when from about 15.5 mh/s to about 21.7 mh/s with an increase in temp of about 3 degrees C
My R9 290s when from about 20 mh/s to about 25 mh/s with negligible temp increase or fan speed increase using about 3 watts additional power.

So in my case I am getting better than 20% performance improvement for about a 1% increase in power consumption.  Nice work!

[utahjohn]

A gift to all Tahiti card users : https://realhet.wordpress.com/ I helped develop this and benchmark it, I am mining 26MHs on a 280x
Look for DiamondTahiti.elf in downloads area.  Rename to match your current *.bin in sgminer.  Restart sgminer to use new bin.

NOTE: you may have cooling issues, this kernel runs GPU very hard, gotta love Utah winter cold here but will crash GPU if it gets too hot.
Still have to run a space heater but  last year no added heat needed mining scrypt ...

Thanks, Utah.  I tried this and got an additional 5 mh/s out of a 280x and yes, it runs hotter.  I have fans running at 100% to cool it and its running about 3 degrees C hotter but still only 71 degrees C.  I am not overclocking the card at the moment.  The 280x seems to deliver less performance for the additional power used when overclocked - power consumption exceeds performance improvement.  

I can try this on the R9 290 but those already run ridiculously hot and I am hesitant.  I fried one PSU/PCI-e cable already pushing them too hard. I am running out of power supplies and frankly, given the value of BTC right now, I don't want to increase my investment right now.

I have modded my cards with VBE7 and additionally redone heatsink paste with "arctic silver".  With my ambient temp gpu at 65-69C I get crashes above 71C ...
Keep in mind the "golden age" of DMD is soon to end, mine as many as u can even at a loss
LOL had the fried PSU problem before also fired MB ... use powered riser cable

[DMDCreeper]

A gift to all Tahiti card users : https://realhet.wordpress.com/ I helped develop this and benchmark it, I am mining 26MHs on a 280x
Look for DiamondTahiti.elf in downloads area.  Rename to match your current *.bin in sgminer.  Restart sgminer to use new bin.

NOTE: you may have cooling issues, this kernel runs GPU very hard, gotta love Utah winter cold here but will crash GPU if it gets too hot.
Still have to run a space heater but  last year no added heat needed mining scrypt ...

Thanks, Utah.  I tried this and got an additional 5 mh/s out of a 280x and yes, it runs hotter.  I have fans running at 100% to cool it and its running about 3 degrees C hotter but still only 71 degrees C.  I am not overclocking the card at the moment.  The 280x seems to deliver less performance for the additional power used when overclocked - power consumption exceeds performance improvement.  

I can try this on the R9 290 but those already run ridiculously hot and I am hesitant.  I fried one PSU/PCI-e cable already pushing them too hard. I am running out of power supplies and frankly, given the value of BTC right now, I don't want to increase my investment right now.

I have modded my cards with VBE7 and additionally redone heatsink paste with "arctic silver".  With my ambient temp gpu at 65-69C I get crashes above 71C ...
Keep in mind the "golden age" of DMD is soon to end, mine as many as u can even at a loss

You mean when the reward goes down to .1 the value of a DMD isn't going up 100%?

[utahjohn]

block reward reduction to 0.1 will have major effect on value of DMD as miners drop out of the game, but diff will drop too so keep mining unless something really bad happens   I expect price to rise 8-10x but that is bad for buyers.  So your mined coins become an even more desired resource

[utahjohn]

@DMDcreeper thank me by pointing some hashrate to pool (in my sig)

[DMDCreeper]

@DMDcreeper thank me by pointing some hashrate to pool (in my sig)

I am already pointing most of my hashing power to your pool!  Have been mining your pool for a few weeks now and its been very uneventful - which is good! 

[big_coins]

block reward reduction to 0.1 will have major effect on value of DMD as miners drop out of the game, but diff will drop too so keep mining unless something really bad happens   I expect price to rise 8-10x but that is bad for buyers.  So your mined coins become an even more desired resource

didnt happen with DOGE halvening. price actually dropped.