Inagame
|
|
January 16, 2021, 11:41:58 PM |
|
Is there any dex exchange working for Monero or is someone working on something like this?
|
|
|
|
elrippos friend
Full Member
Offline
Activity: 1179
Merit: 210
only hodl what you understand and love!
|
|
January 17, 2021, 09:30:37 AM |
|
Is there any dex exchange working for Monero or is someone working on something like this?
https://bisq.network
|
|
|
|
|
visdude
Legendary
Offline
Activity: 1081
Merit: 1001
|
|
January 18, 2021, 12:31:38 AM |
|
I restored from seed on the latest GUI v0.17.1.7 to be a cold wallet in an offline machine. I then generated a view-only wallet from it which I synced in an online machine. My balance is off. All transactions shown are "Received" (green dots). I was able to identify a recent "Send" transaction that is indicated as "Received" (green dot) so I assume the rest of my outputs over a few years (which I am unable to identify) are the same. I shouldn't complain since my balance is a bit more than it should be but I know this is gonna haunt me later down the line. Did I miss a step in setting up this cold/view-only wallet? What gymnastics do I have to do to resolve this issue?
Try exporting the key images from the offline wallet and subsequently importing them in the hot wallet. See (5): https://github.com/monero-ecosystem/monero-GUI-guide/blob/master/monero-GUI-guide.md#send-moneroThank you for your assistance. Importing the cold/offline wallet key images after the view-only/online wallet had synced did not fix my balance issue. I also consequently did "Settings>Wallet>Rescan wallet balance" but this feature did not do anything at all. I even downloaded and synced the blockchain from scratch, just in case the existing one was somehow corrupted but to no avail. To reiterate, I restored my cold/offline/air-gapped wallet from seed (i.e. from scratch) and created the view-only/online wallet from it. Since the "seed" is the ultimate in terms of crypto backup, I assumed that it would just work without any hitch right off the bat. Did I miss a step in my procedure to restore my cold/view-only wallet setup from scratch? Furthermore, several seconds after GUI v0.17.1.7 Wallet and Daemon fully sync, it would go back to syncing mode again with "Daemon blocks remaining: 2". Sometimes, it would drop to "1" momentarily then goes back up to "2" again but would never fully sync again from here on.
Please try applying the ban list: 1. Download this file and place it in the same folder as `monerod` / `monero-wallet-gui`: https://gui.xmr.pm/files/block_tor.txt2. Go to the `Settings` page -> `Node` tab. 3. Enter in `daemon startup flags` box. 4. Restart the GUI (and daemon). This worked. Thanks! Do I need to keep these (ban list file and daemon startup flag) in there from here on? If so, does the list need to be updated all the time and/or updates would be incorporated in subsequent releases?
|
|
|
|
bitebits
Legendary
Offline
Activity: 2222
Merit: 3255
Flippin' burgers since 1163.
|
|
January 18, 2021, 08:22:35 AM |
|
If it does not open the wallet you need and were your funds are, it seems to be useless/wrong Just curious, can you even have 2 of the same words in a row in a seed? I'd brute-force it, depending on how many XMR were in it. Google is your best friend. Sorry for the confusion. It is 25 words with (1) word that is repeated. It is the 7th word and 25th word that are the same. IIRC the last word is a checksum which will allow you to tell if you have entered the words in the correct order. You may want to look into that. Correct: https://web.getmonero.org/resources/moneropedia/mnemonicseed.html"In the official wallet, the mnemonic seed comprises 25 words with the last word being used as a checksum."
|
- You can figure out what will happen, not when /Warren Buffett - Pay any Bitcoin address privately with a little help of Monero.
|
|
|
USMCGRUNT
Newbie
Offline
Activity: 12
Merit: 1
|
|
January 18, 2021, 01:52:55 PM |
|
If it does not open the wallet you need and were your funds are, it seems to be useless/wrong Just curious, can you even have 2 of the same words in a row in a seed? I'd brute-force it, depending on how many XMR were in it. Google is your best friend. Sorry for the confusion. It is 25 words with (1) word that is repeated. It is the 7th word and 25th word that are the same. IIRC the last word is a checksum which will allow you to tell if you have entered the words in the correct order. You may want to look into that. Correct: https://web.getmonero.org/resources/moneropedia/mnemonicseed.html"In the official wallet, the mnemonic seed comprises 25 words with the last word being used as a checksum." I do not think I copied the incorrect password, but even if I did, I know the mnemonic seed is correct. I have all 25 words and verified that they are official words for the GUI. I get a "You're all setup" when I restore from seed, but at the bottom I get "electrum-style word list failed verification." I will see if I can add the photo link... It will not let me in the wallet even though it says I am all set up. https://imgur.com/4PM0L8V
|
|
|
|
Hueristic
Legendary
Offline
Activity: 3864
Merit: 5042
Doomed to see the future and unable to prevent it
|
|
January 18, 2021, 07:13:30 PM |
|
Hi everyone! As you all know, the mission of BitStickers is to help the global promotion of the cryptocurrencies. In the spirit of Satoshi in the third crypto cycle, BitStickers have decided to spread the crypto stickers around the World. As we witness the crypto revolution and supporting all this time whole ideology of crypto, the BitStickers team wants to give something back to the community in the way that supports crypto spirit.
How to get free BitStickers? Easy...
First replay on this post will get free stickers. Personal data and address will be sent by personal massage and you can expect them in no more than 15 work days from the moment we send them. Free stickers package contains Monero stickers in all sizes that we have in our assortment. Share the photos of free stickers when they come to you or places where you put them and you will get the same amount of stickers again. Spread the word around the world... BitStickers
HI! As you should know we in this thread are not so stupid as to give up our OP-SEC for a few stickers. Not even for a Personal Massage.
|
“Bad men need nothing more to compass their ends, than that good men should look on and do nothing.”
|
|
|
Hueristic
Legendary
Offline
Activity: 3864
Merit: 5042
Doomed to see the future and unable to prevent it
|
|
January 19, 2021, 12:11:31 AM |
|
|
“Bad men need nothing more to compass their ends, than that good men should look on and do nothing.”
|
|
|
Jaered
Jr. Member
Offline
Activity: 840
Merit: 4
|
|
January 19, 2021, 11:39:13 AM |
|
I see that Monero and other privacy coins are being delisted and all. I don't know what's goin on in the crypto sphere against them?
|
|
|
|
dEBRUYNE
Legendary
Offline
Activity: 2268
Merit: 1141
|
|
January 19, 2021, 03:01:45 PM |
|
I restored from seed on the latest GUI v0.17.1.7 to be a cold wallet in an offline machine. I then generated a view-only wallet from it which I synced in an online machine. My balance is off. All transactions shown are "Received" (green dots). I was able to identify a recent "Send" transaction that is indicated as "Received" (green dot) so I assume the rest of my outputs over a few years (which I am unable to identify) are the same. I shouldn't complain since my balance is a bit more than it should be but I know this is gonna haunt me later down the line. Did I miss a step in setting up this cold/view-only wallet? What gymnastics do I have to do to resolve this issue?
Try exporting the key images from the offline wallet and subsequently importing them in the hot wallet. See (5): https://github.com/monero-ecosystem/monero-GUI-guide/blob/master/monero-GUI-guide.md#send-moneroThank you for your assistance. Importing the cold/offline wallet key images after the view-only/online wallet had synced did not fix my balance issue. I also consequently did "Settings>Wallet>Rescan wallet balance" but this feature did not do anything at all. I even downloaded and synced the blockchain from scratch, just in case the existing one was somehow corrupted but to no avail. To reiterate, I restored my cold/offline/air-gapped wallet from seed (i.e. from scratch) and created the view-only/online wallet from it. Since the "seed" is the ultimate in terms of crypto backup, I assumed that it would just work without any hitch right off the bat. Did I miss a step in my procedure to restore my cold/view-only wallet setup from scratch? Furthermore, several seconds after GUI v0.17.1.7 Wallet and Daemon fully sync, it would go back to syncing mode again with "Daemon blocks remaining: 2". Sometimes, it would drop to "1" momentarily then goes back up to "2" again but would never fully sync again from here on.
Please try applying the ban list: 1. Download this file and place it in the same folder as `monerod` / `monero-wallet-gui`: https://gui.xmr.pm/files/block_tor.txt2. Go to the `Settings` page -> `Node` tab. 3. Enter in `daemon startup flags` box. 4. Restart the GUI (and daemon). This worked. Thanks! Do I need to keep these (ban list file and daemon startup flag) in there from here on? If so, does the list need to be updated all the time and/or updates would be incorporated in subsequent releases? Regarding the cold wallet setup, do you know how to operate the CLI? With respect to the ban list, you should be able to run v0.17.1.9 without it.
|
|
|
|
visdude
Legendary
Offline
Activity: 1081
Merit: 1001
|
|
January 19, 2021, 04:31:03 PM |
|
I restored from seed on the latest GUI v0.17.1.7 to be a cold wallet in an offline machine. I then generated a view-only wallet from it which I synced in an online machine. My balance is off. All transactions shown are "Received" (green dots). I was able to identify a recent "Send" transaction that is indicated as "Received" (green dot) so I assume the rest of my outputs over a few years (which I am unable to identify) are the same. I shouldn't complain since my balance is a bit more than it should be but I know this is gonna haunt me later down the line. Did I miss a step in setting up this cold/view-only wallet? What gymnastics do I have to do to resolve this issue?
Try exporting the key images from the offline wallet and subsequently importing them in the hot wallet. See (5): https://github.com/monero-ecosystem/monero-GUI-guide/blob/master/monero-GUI-guide.md#send-moneroThank you for your assistance. Importing the cold/offline wallet key images after the view-only/online wallet had synced did not fix my balance issue. I also consequently did "Settings>Wallet>Rescan wallet balance" but this feature did not do anything at all. I even downloaded and synced the blockchain from scratch, just in case the existing one was somehow corrupted but to no avail. To reiterate, I restored my cold/offline/air-gapped wallet from seed (i.e. from scratch) and created the view-only/online wallet from it. Since the "seed" is the ultimate in terms of crypto backup, I assumed that it would just work without any hitch right off the bat. Did I miss a step in my procedure to restore my cold/view-only wallet setup from scratch? Furthermore, several seconds after GUI v0.17.1.7 Wallet and Daemon fully sync, it would go back to syncing mode again with "Daemon blocks remaining: 2". Sometimes, it would drop to "1" momentarily then goes back up to "2" again but would never fully sync again from here on.
Please try applying the ban list: 1. Download this file and place it in the same folder as `monerod` / `monero-wallet-gui`: https://gui.xmr.pm/files/block_tor.txt2. Go to the `Settings` page -> `Node` tab. 3. Enter in `daemon startup flags` box. 4. Restart the GUI (and daemon). This worked. Thanks! Do I need to keep these (ban list file and daemon startup flag) in there from here on? If so, does the list need to be updated all the time and/or updates would be incorporated in subsequent releases? Regarding the cold wallet setup, do you know how to operate the CLI? With respect to the ban list, you should be able to run v0.17.1.9 without it. Opening a command prompt in Windows and copying/pasting args is about the extent of my CLI proficiency unfortunately. OK, I'll try running v0.17.1.9 without it next time.
|
|
|
|
explorer
Legendary
Offline
Activity: 2016
Merit: 1259
|
|
January 20, 2021, 02:46:20 AM |
|
|
|
|
|
Hueristic
Legendary
Offline
Activity: 3864
Merit: 5042
Doomed to see the future and unable to prevent it
|
|
January 20, 2021, 04:11:16 AM |
|
|
“Bad men need nothing more to compass their ends, than that good men should look on and do nothing.”
|
|
|
elrippos friend
Full Member
Offline
Activity: 1179
Merit: 210
only hodl what you understand and love!
|
|
January 20, 2021, 05:50:39 AM |
|
The interview with @arcticmine was funny
|
|
|
|
Hueristic
Legendary
Offline
Activity: 3864
Merit: 5042
Doomed to see the future and unable to prevent it
|
|
January 20, 2021, 05:42:37 PM |
|
The interview with @arcticmine was funny He's the Man.
|
“Bad men need nothing more to compass their ends, than that good men should look on and do nothing.”
|
|
|
bct_ail
Legendary
Offline
Activity: 2646
Merit: 2225
https://t1p.de/6ghrf
|
|
January 22, 2021, 09:48:58 PM |
|
explorer guided me to this thread. So I ask here. Didn't find any other thread where I can ask about my problem. I am not so familiar with Linux but learning every day. I have installed the GUI Wallet in Ubuntu 20.04 and verify the download. A double-click on it doesn't start the GUI. So I compiled the GUI from source according to this tutorial: https://github.com/monero-project/monero-gui#installing-the-monero-gui-from-a-packageI did everything which stands there. Point 4 says "The executable can be found in the build/release/bin folder." 4. Build
make release -j4
* 4 - number of CPU threads to use * Add CMAKE_PREFIX_PATH enviroment variable to set a custom Qt install directory, e.g. CMAKE_PREFIX_PATH=$HOME/Qt/5.9.7/gcc_64 make release -j4
The executable can be found in the build/release/bin folder. https://github.com/monero-project/monero-gui#installing-the-monero-gui-from-a-packageBut there is no executable file (at least I don't recognise anything there). What do I have to type in the terminal for starting the wallet?
|
|
|
|
|
phishead
|
|
January 26, 2021, 06:18:25 AM |
|
W00t! glad I got sidetracked! Saved me some XMR! Peyton still Sucks. I had a good laugh looking back at this part of the thread from our Super Bowl wager @jwinterm Cool that I have some authentic cards from that game that were game worn jerseys and such haha
|
|
|
|
Hueristic
Legendary
Offline
Activity: 3864
Merit: 5042
Doomed to see the future and unable to prevent it
|
|
January 26, 2021, 06:24:05 AM |
|
W00t! glad I got sidetracked! Saved me some XMR! Peyton still Sucks. I had a good laugh looking back at this part of the thread from our Super Bowl wager @jwinterm Cool that I have some authentic cards from that game that were game worn jerseys and such haha Cool memories man!
|
“Bad men need nothing more to compass their ends, than that good men should look on and do nothing.”
|
|
|
visdude
Legendary
Offline
Activity: 1081
Merit: 1001
|
|
January 26, 2021, 09:06:42 AM |
|
I restored from seed on the latest GUI v0.17.1.7 to be a cold wallet in an offline machine. I then generated a view-only wallet from it which I synced in an online machine. My balance is off. All transactions shown are "Received" (green dots). I was able to identify a recent "Send" transaction that is indicated as "Received" (green dot) so I assume the rest of my outputs over a few years (which I am unable to identify) are the same. I shouldn't complain since my balance is a bit more than it should be but I know this is gonna haunt me later down the line. Did I miss a step in setting up this cold/view-only wallet? What gymnastics do I have to do to resolve this issue?
Try exporting the key images from the offline wallet and subsequently importing them in the hot wallet. See (5): https://github.com/monero-ecosystem/monero-GUI-guide/blob/master/monero-GUI-guide.md#send-moneroThank you for your assistance. Importing the cold/offline wallet key images after the view-only/online wallet had synced did not fix my balance issue. I also consequently did "Settings>Wallet>Rescan wallet balance" but this feature did not do anything at all. I even downloaded and synced the blockchain from scratch, just in case the existing one was somehow corrupted but to no avail. To reiterate, I restored my cold/offline/air-gapped wallet from seed (i.e. from scratch) and created the view-only/online wallet from it. Since the "seed" is the ultimate in terms of crypto backup, I assumed that it would just work without any hitch right off the bat. Did I miss a step in my procedure to restore my cold/view-only wallet setup from scratch? Furthermore, several seconds after GUI v0.17.1.7 Wallet and Daemon fully sync, it would go back to syncing mode again with "Daemon blocks remaining: 2". Sometimes, it would drop to "1" momentarily then goes back up to "2" again but would never fully sync again from here on.
Please try applying the ban list: 1. Download this file and place it in the same folder as `monerod` / `monero-wallet-gui`: https://gui.xmr.pm/files/block_tor.txt2. Go to the `Settings` page -> `Node` tab. 3. Enter in `daemon startup flags` box. 4. Restart the GUI (and daemon). This worked. Thanks! Do I need to keep these (ban list file and daemon startup flag) in there from here on? If so, does the list need to be updated all the time and/or updates would be incorporated in subsequent releases? Regarding the cold wallet setup, do you know how to operate the CLI? With respect to the ban list, you should be able to run v0.17.1.9 without it. Can my balance issue be fixed via CLI then?
|
|
|
|
|