Claymore's CryptoNote AMD GPU Miner v11.3

[m1n1ngP4d4w4n]

any link for 9.5 claymore to downloaded?

https://drive.google.com/drive/folders/0B69wv2iqszefdkVDNkxla3BCZHc
All  of them  

or  just  9.5

https://drive.google.com/open?id=0B69wv2iqszefOHRxbmh0eUZUdGs

Sorry, this file is infected with a virus....

Alot of trojan / virus will install miners software on your computer to generate money (ever heard of botnet ?) so most miners out here are being flagged being malicious, because known to be packed into trojan. If you mine for yourself, it'll be detected as a virus of course, but it's not just known to have malicious usage by 3rd parties

[1714239768]

1714239768

[1714239768]

1714239768

[Hurtman]

What I can write in the bat file that I could watch hash rate of each card in remote monitoring ?

[Ned Kelly]

What I can write in the bat file that I could watch hash rate of each card in remote monitoring ?

Nothing use mport instead.

[racminer]

Hi

I have 4 rigs that work perfectly with Zcash (Claymore miner 9.2 no crashes whatsoever until now)  

1)  7 x R7 370 ; windows 10 ; Crimson 15.12
2)  7 x R7 370 ; windows 10 ; Crimson 15.12
3)  2 x Rx480 + 4 R9 380 ; Crimson 16.9.2
4)  6 x Rx480 ;  Crimson 16.9.2

Monero is quite profitable at the moment, Rigs 1 and 2 worked perfectly with monero  miner 9.6.
However recurrent crashes occur with rigs 3 and 4. Sometimes after 15min, sometimes after a few hours.
I have no clue of whatever is wrong !

Maybe Crimson 16.9.2 is not what I need for monero miner??

Help.

[antantti]

Just FYI:

'Today Kraken is launching support for trading Monero (XMR)... to deposit your XMR go to Funding > Deposit > XMR and generate a deposit address. Then send your XMR deposit to this deposit address. 15 confirmations are required before the funds are available in your account balance for trading. Kraken utilizes integrated addresses which have the payment ID embedded in the address, so you don’t need to specify a separate payment ID for your deposit.'

[BeneQ]

Jesus Christ  what a moron

Links I posted  on  google drive are original links from   first post !!!!
uneducated moron 

[racminer]

Meantime Claymore's v9.6    6x sapphire 480 nitro+ 4GB  default clocks  mining  without any problem for last 26h with  constant speed 4480 H/s

What driver version do you use for your Rx 480 ?

Thanks.

[yuslav]

Hi

I have 4 rigs that work perfectly with Zcash (Claymore miner 9.2 no crashes whatsoever until now)  

1)  7 x R7 370 ; windows 10 ; Crimson 15.12
2)  7 x R7 370 ; windows 10 ; Crimson 15.12
3)  2 x Rx480 + 4 R9 380 ; Crimson 16.9.2
4)  6 x Rx480 ;  Crimson 16.9.2

Monero is quite profitable at the moment, Rigs 1 and 2 worked perfectly with monero  miner 9.6.
However recurrent crashes occur with rigs 3 and 4. Sometimes after 15min, sometimes after a few hours.
I have no clue of whatever is wrong !

Maybe Crimson 16.9.2 is not what I need for monero miner??

Help.

We are waiting for new miners, but generally pass on 9. 5 and you will have happiness!

[Trimegistus]

Just FYI:

'Today Kraken is launching support for trading Monero (XMR)... to deposit your XMR go to Funding > Deposit > XMR and generate a deposit address. Then send your XMR deposit to this deposit address. 15 confirmations are required before the funds are available in your account balance for trading. Kraken utilizes integrated addresses which have the payment ID embedded in the address, so you don’t need to specify a separate payment ID for your deposit.'

These are great news but I can't connect to dwarf's using a Kraken address 

Any ideas?

[GabryRox]

Well, after initial good results on both my rigs with 9.6, I now have problems with both.  Woke up this morning to rig #2 (6x RX 470s) crashed and all fans blasting. This happened the night before with core/clock settings of 1200/1950, so I had lowered it to 1200/1920.  It ran all day fine then just a few minutes ago, I check it and I had the same "Open CL hung in thread 10 & 11" issue that had occurred the night before.  Now I have it set at default 1242/1900, so we will see how that goes.

On Rig #1 that had been running 4x rx 470s for over 4 days straight at 1242/1900, it just experienced that sporadic fan blasting issue that others have encountered. So, I had to reboot and reset that one as well.

Bottom line, there definitely appear to be stability issues with the 4xx series cards, so hopefully this is something that can be addressed in the forthcoming v10. 

I know this belongs on the CPU thread but I have also seen weird things going on with Claymore CPU XMR Miner 3.5.  I have 3 K series i7's mining it and on 2 of my 3 PCs, the hash-rate has inexplicably dropped by about 10-15%.  This is after restarting and rebooting several times and there is nothing else running CPU wise, yet for some reason it's not as effective.

Really looking forward to the GPU miner update. Thanks in advance Claymore!

So... both rigs ran fine overnight with the 1242/1900 settings, but then this morning, rig #2 crashes and reboots again. Same settings, same cards, generally same setup, but rig 2 is just unstable. Got it running again but now I am getting sporadic "low difficulty shares".  Does anyone know what the main causes of these are?  Also, what problems do they cause?  I've heard of people getting banned from dwarf for too many of these so I don't want that to happen, but don't know what to do to fix it either. Right now at least it I've only seen 2 in about 25 minutes of running but not sure what "too many" is either.

[antantti]

Just FYI:

'Today Kraken is launching support for trading Monero (XMR)... to deposit your XMR go to Funding > Deposit > XMR and generate a deposit address. Then send your XMR deposit to this deposit address. 15 confirmations are required before the funds are available in your account balance for trading. Kraken utilizes integrated addresses which have the payment ID embedded in the address, so you don’t need to specify a separate payment ID for your deposit.'

These are great news but I can't connect to dwarf's using a Kraken address 

Any ideas?

I actually never tried that myself, not mining to exchange. But yes, can confirm, doesn't connect.

Tried with nvidia/amd , ccminer/ claymore/ wolf0, dwarf/ minexmr/ crypto-pool and none of those combinations connect.

Deposit from wallet without payment id confirmed working though.

[m1n1ngP4d4w4n]

Just FYI:

'Today Kraken is launching support for trading Monero (XMR)... to deposit your XMR go to Funding > Deposit > XMR and generate a deposit address. Then send your XMR deposit to this deposit address. 15 confirmations are required before the funds are available in your account balance for trading. Kraken utilizes integrated addresses which have the payment ID embedded in the address, so you don’t need to specify a separate payment ID for your deposit.'

These are great news but I can't connect to dwarf's using a Kraken address 

Any ideas?

They probably need to add to the pool software a compatibility to take in account that kraken merge the wallet & payment ID.

[aaronsace]

How undervolt card with watt tool for -100 MV I can not understand how I can used it for undervolt

Just use the latest AMD Crimson drivers. You can change the voltage of AMD 2xx, AMD 4xx etc. in AMD Radean Settings.

[Qazo]

what is wrong in my code?

NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8005 -u 4GdoN7NCTi8a5gZug7PrwZNKjvHFmKeV11L6pNJPgj5QNEHsN6eeX3DaAQFwZ1ufD4LYCZKArktt113 W7QjWvQ7CWBjZiJTcVxE7DJjTmE -p x


cannot connect I get

Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlogin"}}

[m1n1ngP4d4w4n]

what is wrong in my code?

NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8005 -u 4GdoN7NCTi8a5gZug7PrwZNKjvHFmKeV11L6pNJPgj5QNEHsN6eeX3DaAQFwZ1ufD4LYCZKArktt113 W7QjWvQ7CWBjZiJTcVxE7DJjTmE -p x


cannot connect I get

Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlogin"}}

if you mine to an exchange, you need to put as adress

WALLET.PAYMENTID

and not WALLET alone.

[Trimegistus]

what is wrong in my code?

NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8005 -u 4GdoN7NCTi8a5gZug7PrwZNKjvHFmKeV11L6pNJPgj5QNEHsN6eeX3DaAQFwZ1ufD4LYCZKArktt113 W7QjWvQ7CWBjZiJTcVxE7DJjTmE -p x


cannot connect I get

Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlogin"}}

There is nothing wrong with your code, but dwarf does not support those XMR addresses. I sent an email to support and I'm waiting for their answer.

[aaronsace]

what is wrong in my code?

NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8005 -u 4GdoN7NCTi8a5gZug7PrwZNKjvHFmKeV11L6pNJPgj5QNEHsN6eeX3DaAQFwZ1ufD4LYCZKArktt113 W7QjWvQ7CWBjZiJTcVxE7DJjTmE -p x


cannot connect I get

Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlogin"}}

There is nothing wrong with your code, but dwarf does not support those XMR addresses. I sent an email to support and I'm waiting for their answer.

I think Claymore is sorting the stratum username mess out soon in the next update:

Please allow workernames as username, not only wallet addresses

bumping this once more

Ok I will release new version in 2-4 days, I will update many things.

[m1n1ngP4d4w4n]

what is wrong in my code?

NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8005 -u 4GdoN7NCTi8a5gZug7PrwZNKjvHFmKeV11L6pNJPgj5QNEHsN6eeX3DaAQFwZ1ufD4LYCZKArktt113 W7QjWvQ7CWBjZiJTcVxE7DJjTmE -p x


cannot connect I get

Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlogin"}}

There is nothing wrong with your code, but dwarf does not support those XMR addresses. I sent an email to support and I'm waiting for their answer.

Ah is it again a kraken adress ?

[ciombat]

What hashrate on r9 390's and v9.6?   

[Ursul0]

fyi:


maybe fixed in the next version?

EDIT: also there's really weird behavior of the temps/fan speed display in EthMan - if I don't set -cclock to some value (not 0 for a single card is enough), there's no temp/fan data coming.  probably has something to so with system path to amd drivers...