Beyerd17
|
|
October 23, 2017, 09:52:34 PM |
|
v 10.2 driver 16.9.2 NsGpuCNMiner.exe -xpool pool -xwal wal -xpsw x -di 01 -tstop 65 -dmem 1 -allpools 1 -h 940
Max 760 h\s per card 480x Why I can reach 900 ? What I need to do ?
on eth I have 30+-
Use blockchain drivers, modified straps, core 1250 and above, and my settings -dmem and - h Is this for 4gb or 8gb cards? I have blockchain drivers, 480 Nitro+ 4GB modded to around 1250c 2000m. Only getting around 750h/s... I tried looking at strapping the memory myself (currently using Anorak Memshift) but I'm not confident enough I fully understand the areas I need to modify. There is 1:1500, 1:1650, 1:750.... but then theres 2:1500, 2:1650 etc. Should I be copying the line 1:1500 to all the other 1's (up to 2000 that is)then doing the same with the 2s? I believe it will work for both 4gb and 8gb Cards, I have 4gb Cards myself and have never had any problems with those.
|
|
|
|
NewbieMiner17
Newbie
Offline
Activity: 46
Merit: 0
|
|
October 24, 2017, 07:06:19 AM |
|
v 10.2 driver 16.9.2 NsGpuCNMiner.exe -xpool pool -xwal wal -xpsw x -di 01 -tstop 65 -dmem 1 -allpools 1 -h 940
Max 760 h\s per card 480x Why I can reach 900 ? What I need to do ?
on eth I have 30+-
Use blockchain drivers, modified straps, core 1250 and above, and my settings -dmem and - h Is this for 4gb or 8gb cards? I have blockchain drivers, 480 Nitro+ 4GB modded to around 1250c 2000m. Only getting around 750h/s... I tried looking at strapping the memory myself (currently using Anorak Memshift) but I'm not confident enough I fully understand the areas I need to modify. There is 1:1500, 1:1650, 1:750.... but then theres 2:1500, 2:1650 etc. Should I be copying the line 1:1500 to all the other 1's (up to 2000 that is)then doing the same with the 2s? I believe it will work for both 4gb and 8gb Cards, I have 4gb Cards myself and have never had any problems with those. But what did you do? Put 1:500 Straps on rest of options? What does the 1:or2: even represent in this case?
|
|
|
|
nowaltcoin
|
|
October 24, 2017, 09:43:30 AM |
|
Hi Mister Claymore, my wishlist for Version 10.x Support for HD 7790 (Bonaire) Problem solved for HD 7850/R9 270 (Pitcairn) a lot of wrong shares and at least slighter less power usage......... At the moment i'am living with version 9.7 but i can see in version 10.2 there is room for improvement! (sgminer is slighter faster with less power but less stable) (XMR-stak-amd is also faster but not working in all configuration/all cards) so 10.x will be the winner, hopefully! Thanks for your work and i'am looking forward to the new version
|
8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org 12 * GPU's mining ETN/Sumocoin You like to mine something different: https://deutsche-emark.de/
|
|
|
adlian
Newbie
Offline
Activity: 4
Merit: 0
|
|
October 24, 2017, 10:51:10 AM |
|
Thanks a lot - your help worked out pls help me to config the .bath file for CPU mining in MPH : 8320 amd 8 cores ; till now it worked in 'the nanopool > NsCpuCNMiner64.exe -o stratum+tcp://xmr-eu1.nanopool.org:14444 -u deposit address.payment ID.worker -cpu -p x -t 6 (Claymore CryptoNote CPU Miner v3.5 Beta - POOL) This is my Claymore .bat file configuration for MPH to mine Monero. setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_SINGLE_ALLOC_PERCENT 100 setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe -xpool ssl://europe.cryptonight-hub.miningpoolhub.com:20580 -xwal USERNAME.WORKERNAME -xpsw x -ftime 10 -h 0 -dmem -1
|
|
|
|
Call_Me_Bambi
|
|
October 24, 2017, 12:51:56 PM |
|
Thanks a lot - your help worked out pls help me to config the .bath file for CPU mining in MPH : 8320 amd 8 cores ; till now it worked in 'the nanopool > NsCpuCNMiner64.exe -o stratum+tcp://xmr-eu1.nanopool.org:14444 -u deposit address.payment ID.worker -cpu -p x -t 6 (Claymore CryptoNote CPU Miner v3.5 Beta - POOL) This is my Claymore .bat file configuration for MPH to mine Monero. setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_SINGLE_ALLOC_PERCENT 100 setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe -xpool ssl://europe.cryptonight-hub.miningpoolhub.com:20580 -xwal USERNAME.WORKERNAME -xpsw x -ftime 10 -h 0 -dmem -1
I don't use CPUs to mine and so I have not bothered to find out how to set up a miner to mine with a CPU. There are different miners for use with CPUs, just Google "CPU miner Monero".
|
|
|
|
carlo_0000
Legendary
Offline
Activity: 1281
Merit: 1003
|
|
October 24, 2017, 06:29:19 PM |
|
ok so i tested 1500 straps on my rx470 with 1880 memory but it s worse than 1375traps get only 689h used -h 940
its also worse on eth lose almost 1mh best is 1375traps for me
|
|
|
|
IojkinKot
Newbie
Offline
Activity: 63
Merit: 0
|
|
October 24, 2017, 08:13:50 PM |
|
ok so i tested 1500 straps on my rx470 with 1880 memory but it s worse than 1375traps get only 689h used -h 940
its also worse on eth lose almost 1mh best is 1375traps for me
-h 1830,1900 -dmem 0
|
|
|
|
carlo_0000
Legendary
Offline
Activity: 1281
Merit: 1003
|
|
October 25, 2017, 03:34:03 AM |
|
ok so i tested 1500 straps on my rx470 with 1880 memory but it s worse than 1375traps get only 689h used -h 940
its also worse on eth lose almost 1mh best is 1375traps for me
-h 1830,1900 -dmem 0 ok thanks forgot to try -dmem0 i get 805 on the 1375 strap, test 1 gpu with 1500 strap but got only 724 i don't understand why me straps 1375 are faster does it have to do that people have 2000+ ram on 1500 strap ? did they test 1375trap ? maybe it s even faster
|
|
|
|
marcos5872
Member
Offline
Activity: 107
Merit: 10
|
|
October 26, 2017, 12:49:28 AM |
|
ok so i tested 1500 straps on my rx470 with 1880 memory but it s worse than 1375traps get only 689h used -h 940
its also worse on eth lose almost 1mh best is 1375traps for me
-h 1830,1900 -dmem 0 Thanks for you coments, I reached 900 h/s on my rx 580 4 gb.
|
|
|
|
xeridea
|
|
October 26, 2017, 04:27:53 AM |
|
Anyone tried the new AMD driver to see if you can do HBCC on more than 4 vegas?
|
Profitability over time charts for many GPUs - http://xeridea.us/chartsBTC: bc1qr2xwjwfmjn43zhrlp6pn7vwdjrjnv5z0anhjhn LTC: LXDm6sR4dkyqtEWfUbPumMnVEiUFQvxSbZ Eth: 0x44cCe2cf90C8FEE4C9e4338Ae7049913D4F6fC24
|
|
|
bossbamboo
Newbie
Offline
Activity: 4
Merit: 0
|
|
October 26, 2017, 07:30:33 AM |
|
thank for the miner It's the best miner that I ever used. I got 770 h/s on rx 570 @core 1150 MHz ,mem 1950Mhz and 730 on rx470 @core 1200 MHz ,mem 1750Mhz.
|
|
|
|
djdion
Newbie
Offline
Activity: 62
Merit: 0
|
|
October 26, 2017, 01:13:21 PM |
|
when this miner optimize for VEGA series?
|
|
|
|
|
BSAlex
Member
Offline
Activity: 239
Merit: 10
|
|
October 27, 2017, 08:03:27 AM |
|
Hi! I am trying to use four HD6990 cards. After reading the thread I've decided to use 9.7 with 15.12 drivers, Win 10 Pro. Got strange issue. Windows is correctly reporting 4 x HD6990 as 8 x GPU, but when I start CN miner it use only 7 GPU. If I switch of any card 6 GPU are running, so I feel it is not any issue with risers. PSU have much more power then current setup. Please advise how to find what's the matter.
|
|
|
|
djdion
Newbie
Offline
Activity: 62
Merit: 0
|
|
October 28, 2017, 05:35:28 AM |
|
i ask about claymore miner not cast XMR. noob
|
|
|
|
garytheasshole
Full Member
Offline
Activity: 406
Merit: 105
Chosŏn Minjujuŭi Inmin Konghwaguk
|
|
October 28, 2017, 11:20:46 AM |
|
i ask about claymore miner not cast XMR. noob Not my fault your parents are brother and sister so your tiny little retard mind is unable to comprehend the English language.
|
|
|
|
exortis
|
|
October 29, 2017, 11:42:29 AM |
|
rx480 8gb card claymore 9.7 stable working With 10.2, the miner restarts continuously
I want to switch to 10.2 for lowdifficultyshare error at 9.7
|
|
|
|
Call_Me_Bambi
|
|
October 29, 2017, 04:23:12 PM |
|
rx480 8gb card claymore 9.7 stable working With 10.2, the miner restarts continuously
I want to switch to 10.2 for lowdifficultyshare error at 9.7
Don't get me wrong, Claymore produces some great miners and has superb support, but sgminer-gm-5.5.5 runs faster, draws less power and has no fee. https://github.com/genesismining/sgminer-gm/releases
|
|
|
|
exortis
|
|
October 29, 2017, 04:52:21 PM |
|
rx480 8gb card claymore 9.7 stable working With 10.2, the miner restarts continuously
I want to switch to 10.2 for lowdifficultyshare error at 9.7
Don't get me wrong, Claymore produces some great miners and has superb support, but sgminer-gm-5.5.5 runs faster, draws less power and has no fee. https://github.com/genesismining/sgminer-gm/releasessgminer How can I use dwarfpool or any other advice pool?
|
|
|
|
Call_Me_Bambi
|
|
October 29, 2017, 11:46:50 PM |
|
rx480 8gb card claymore 9.7 stable working With 10.2, the miner restarts continuously
I want to switch to 10.2 for lowdifficultyshare error at 9.7
Don't get me wrong, Claymore produces some great miners and has superb support, but sgminer-gm-5.5.5 runs faster, draws less power and has no fee. https://github.com/genesismining/sgminer-gm/releasessgminer How can I use dwarfpool or any other advice pool? I tried Dwarfpool but found a pool that lets you withdraw coin at, virtually, any limit unlike Dwarfpool which has quite a high limit for a small miner. The pool I use is Mining Pool Hub, http://miningpoolhub.com/
|
|
|
|
|