Claymore's CryptoNote AMD GPU Miner v11.3

[pehoko]

Well I think older cards are not compatible with latest version miner. Maybe RX 4XX or newer have no problem.

[MadSciencist]

Well I think older cards are not compatible with latest version miner. Maybe RX 4XX or newer have no problem.

Ok, I will try older version.

[uDwcHYO]

on this algorithm, the energy consumption graph does not go smoothly, but constantly jumps, is there any possibility of making consumption smoother?

[alucard20724]

Version 10.2
I'm getting a 100% reject rate on Sia with my vega cards.(stock settings)
RX4xx and RX5xx cards are fine

[Victorio]

Version 10.2
I'm getting a 100% reject rate on Sia with my vega cards.(stock settings)
RX4xx and RX5xx cards are fine

This is the Cryptonote miner thread, not the Ethereum one, that can mine Siacoin in dual mode.
They both are at 10.2 version.
Ask in the Ethereum miner thread.

[leonix007]

Hi everybody.  Got problem:

6 GPU RIG - XMR:
 - 5 RX470*4Gb MSI - 5*680 Mh
 - 1 RX470*8Gb Sapphire - 340 Mh

Why my Sapphire RX470 8G gives just 340 Mh???

basically 4GB ones has different mem usage compared to 8GB's Use -di options, Identify the 8GB RX470 gpu and use -h for each GPU's detected

[jarheadius]

I still receive same invalid username error even with the change to what you suggest, is this correct?

-xwal 4AsRKfddYujZn9eaCRhTwiD9soJ9QoVAarYkgDEQ8CKLMauocxB6QmWbwaVe4vUMveKAzAiA4j8xgUi 29TpKXpm42g1VN4 jarheadius.1

[Moonunit1]

Hi Guys,

Having a complete brain fart here. Would appricate any help.

I have an I7 running the cpu miner 100% no problem,

When I run the GPU miner I am getting the "no ASM binary found for gpu 0"
GPU is amd Radeon r7 450, ive set my virtual memory to 12gb.

GPU is reporting as ~0 Capeverde, 3072 mb available, 8 compute units...

My config for miner is below.

------------------
-xpool stratum+tcp://xmr-eu.dwarfpool.com:8005
-xwal "Wallet address."
-xpsw x
-di 0
#-allpools 1
#-tt 75
________________

"wallet address" is removed but I have the same as my CPU miner config.
Any thoughts. I tried Minergate to check cards and running fine there but obviously crap hash. 160 H/s...

Thanks

Just ran 9.7 and it works ok.

[sir4o]

on this algorithm, the energy consumption graph does not go smoothly, but constantly jumps, is there any possibility of making consumption smoother?

How's that important for you?

[MadSciencist]

I have one question. Is this kind of error normal for R9 280X (3GB) GPUs?
https://i.imgur.com/oxQTWB5.png
For 10 submitted shares ~one is incorrect. This GPU is not overclocked, tried different -h values, but with lower -h errors happen even more often.

Well I think older cards are not compatible with latest version miner. Maybe RX 4XX or newer have no problem.

Tried older version. Unfortunately, still the same.

[pehoko]

Well version 9.6 works fine on my rigs with old cards.

[notbatman]

I've lost 4.5569620253165% hashing power on all my card because I got robbed by Nicehash and now have to use the -nofee 1 option.    I know Claymore had a fat sack of BTC on Nicehash too, I know how they work. Claymore also now gets nothing from me using his miner. If i was playing WoW that would be like an entire set bonus.

I see Nicehash for what it truly was i.e. a way to attack coin networks, keep mining profits for small miners down and rob small miners of their money. This hack narrative is such bullshit; exit scammers.

[gOCe]

No, thats not my suggestion

my suggestion was:
-xwal jarheadius.1

Miningpoolhub dont use your wallet  is username.rigname

then in miningpoolhub website, you tell the site your wallet, not in the miner

I still receive same invalid username error even with the change to what you suggest, is this correct?

-xwal 4AsRKfddYujZn9eaCRhTwiD9soJ9QoVAarYkgDEQ8CKLMauocxB6QmWbwaVe4vUMveKAzAiA4j8xgUi 29TpKXpm42g1VN4 jarheadius.1

[Call_Me_Bambi]

Is 1660 Mh/s for RX480 8GB + RX580 8GB good enough?

The hashrate will differ slighlty between different card manufacturers and memory types, but 800 Mh/s per card is quite good. It's around what I got with most of my cards, but my Asus ROG Strix RX480's would give 1000 Mh/s for Cryptonote.

[OhMyHolyToken]

Version 10.2 detect 4Gb memory on Radeon 280X 3Gb and doesn't work.

Version 9.7 works fine.

Strange glitch.

[jarheadius]

Thanks, it worked. But now I get errors for all 6 GPU's reporting GpuMiner dk2an0 failed -4.

Any suggestions?

[kathie_vice]

Hello everyone! 
So is there anyway to disable nicehash from devfee pool? Miner couldn't connect and restarting (rebooting in my situation)? Or only hope is to wait for new version? Thanks!
 

[liomojo1]

Why when mining monero rx480 hashes much better with 900h and rx580 hashes with 750h? Same setting and modded bioses and on etherium 580 is doing 30.5mgh and 480 is 29.5? What is going on?

[notbatman]

Why when mining monero rx480 hashes much better with 900h and rx580 hashes with 750h? Same setting and modded bioses and on etherium 580 is doing 30.5mgh and 480 is 29.5? What is going on?

Drivers or memory type maybe, 480/580 almost the same card. The VRM could be set to 1750 in the BIOS on the 580 maybe too. Claymore claimed some major breakthrough on his ETH miner starting version 10 regarding memory, I think he accessed the VRM.

[cero10]

Is there anyone mining cryptonight with claymore xmr 10.2 without the gpu errors? i am running claymore xmr 9.7 perfectly with my R9 280Xs.