Claymore's CryptoNote AMD GPU Miner v11.3

[restless]

WOW,

the 11.st version have only the half performance as 10.2 .

My setting(W7 pro latest driver 17.12.1):

4x fiji (2x Radeon pro duo)

-xpool ssl://xmr-eu1.nanopool.org:14433
-xwal my_long_number
-xpsw my_password
-tt 60,60,60,60
-powlim -21,-21,-21,-21
-h 960,960,960,960
-allpools 1

sorry 11.0 -> 10.2 is better (4x 860 h/s @ 730W)

Remove your -h setting. New version uses different memory access and optimal -h is different

[restless]

My experience is the same as restless.  On my two gigabyte 270OC, 9.7 is still the best.

11.0
-h 448 -dmem 1 (11.0 default) - OpenCL hang.
-h 512 -dmem 0  - 840h/s
-h 256 -dmem 1 - 810h/s

9.7
-h 512 (default) - 855-860h/s

You get 800h/s from 270 oc-ed ?! What clocks ?! Frankly I don't believe it
I get 480-500 from 270x running 1100/1500...

I also get hangs sometimes with 270x and 11.0 - when the card is main one running the display under Win10. Same card under Win7 runs fine 0-o

[onionpealer]

Can someone who's mining Electroneum on MiningPoolHub paste their start.bat here please?

Here is my Claymore Cryptonote miner configuration for MPH. I found that adding '-mport 0' oddly helped give less rejected shares.
I'm using Claymore's Cryptonote miner for mining Electronium just now as I'm having a bit of a stability problem with SGminer-GM on this machine.

Code:

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner -xpool ssl://europe.cryptonight-hub.miningpoolhub.com:20596 -xwal USER.WORKER -xpsw x -nofee 1 -allpools 1 -ftime 10 -mport 0

[ser_ator]

RX470

v10.2 - 530 H/s
v11 - 330 H/s

wait for the next version.

1.
lads who have lower hash with v11 :

play with -h , -h is to high.you need to find again sweetspot ... downgrade -h  +/- 512   with 4 gb card -dmem 1

2. with 7950 280 card still very high incorect gpu sharre (over 15-20%)

the rest have very low percent & all in gpu 0

[ser_ator]

It's not that bad, it's doing about 400ish with xmr-stak and its rather cheap and easy to find.

Really? What cards are doing 400?  my 560s are doing 450, so with the reduced cost and wattage I'd be very very interested.

450? nice ..

mine  only 340h/s with 992/8

[iwazamurai]

RX470

v10.2 - 530 H/s
v11 - 330 H/s

wait for the next version.

1.
lads who have lower hash with v11 :

play with -h , -h is to high.you need to find again sweetspot ... downgrade -h  +/- 512   with 4 gb card -dmem 1

2. with 7950 280 card still very high incorect gpu sharre (over 15-20%)

the rest have very low percent & all in gpu 0

thanks for your advice about RX470.
But it never goes beyond v10.2. I tried with "-h" from 510 to 515 and around 900. I didn't set "- dmem 1" since default is 1.
The bios is without mod,  and I have no intent to apply mod to the bios, so I stick to v10.2

[infojunkiePHD]

My experience is the same as restless.  On my two gigabyte 270OC, 9.7 is still the best.

11.0
-h 448 -dmem 1 (11.0 default) - OpenCL hang.
-h 512 -dmem 0  - 840h/s
-h 256 -dmem 1 - 810h/s

9.7
-h 512 (default) - 855-860h/s

You get 800h/s from 270 oc-ed ?! What clocks ?! Frankly I don't believe it
I get 480-500 from 270x running 1100/1500...

I also get hangs sometimes with 270x and 11.0 - when the card is main one running the display under Win10. Same card under Win7 runs fine 0-o

Read it closer, restless.  I have two cards, that's 425-430 each.

9.7 'just works' for those of us with pitcairn.

[petrasblynai]

sorry for stupid question 
maybe someone can explain me step by step how to start?
I have https://mymonero.com wallet so I need put in config file and start ? what I should do more ?
thanks, guy!

[onionpealer]

sorry for stupid question  
maybe someone can explain me step by step how to start?
I have https://mymonero.com wallet so I need put in config file and start ? what I should do more ?
thanks, guy!

You need a pool to start with, there are many out there. You could start out with MiningPoolHub www.miningpoolhub.com , support thread https://bitcointalk.org/index.php?topic=472510.0

Now delete everything in the 'start.bat' file (ignore the config.txt file) and put this in the start.bat file, changing the Username/Workername for your specific needs.

Code:

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner -xpool ssl://europe.cryptonight-hub.miningpoolhub.com:20596 -xwal USERNAME.WORKERNAME -xpsw x -allpools 1

[Asgaroth]

I have 2 x PowerColor Red Devil RX-580 Golden Sample 8GB cards mining Electroneum with the following speeds with v11.0

Code:

XMR - Total Speed: 1721 H/s, Total Shares: 442, Rejected: 0, Time: 17:40
XMR: GPU0 858 H/s, GPU1 863 H/s

If I'm not mistaken, I think I was getting around 780/790 H/s per card prior to the update.

BIOS moded with the following reported by rocm-smi:

Code:

====================    ROCm System Management Interface    ====================
================================================================================
 GPU  DID    Temp     AvgPwr   SCLK     MCLK     Fan      Perf    OverDrive  ECC
  1   67df   54.0c    76.111W  1265Mhz  2250Mhz  40.0%    auto      0%       N/A      
  0   67df   62.0c    77.182W  1265Mhz  2250Mhz  40.0%    auto      0%       N/A      
================================================================================
====================           End of ROCm SMI Log          ====================

Wish I could hit the 900+ H/s mark, but I'm not sure what else I could do to improve the speeds.

[notbatman]

^^^ 2k WTF man

[oddity2505]

^^^ 2k WTF man

Seems like a joke. I guess has a vega and 480, making 2k and 1k correspondingly.

[rascabily]

http://prntscr.com/hpmtqb  Asus RX 480 memory samsung v 11 2056 H\s 

this is rx vega 64

[rascabily]

http://prntscr.com/hpmtqb  Asus RX 480 memory samsung v 11 2056 H\s 

this is rx vega 64

[stanfosdguy]

Not sure what I am doing wrong, but I am not having a lot of luck getting things running 'right'.

I am running the following:

windows 7 x64
8GB RAM
16GB VirtualMemory
Powercolor HD7950 3gb
Asus r9 270x 2gb
Sapphire dual-x 280x 3gb
MSI Armor 570 8gb

I am trying to run claymore v11 cryptonote miner.  I am running Crimson 15.12 drivers for the older 3 cards.  I was running 17.11.2 for the 570, but my speeds were really low (~350h/s).  I am trying to find a better driver to use with the 570 to get my speeds up, but so far all of the other drivers I have tried kick my 570 into an event id 43 in windows.  If anyone could provide any guidance, I would certainly appreciate it.

[notbatman]

Not sure what I am doing wrong, but I am not having a lot of luck getting things running 'right'.

I am running the following:

windows 7 x64
8GB RAM
16GB VirtualMemory
Powercolor HD7950 3gb
Asus r9 270x 2gb
Sapphire dual-x 280x 3gb
MSI Armor 570 8gb

I am trying to run claymore v11 cryptonote miner.  I am running Crimson 15.12 drivers for the older 3 cards.  I was running 17.11.2 for the 570, but my speeds were really low (~350h/s).  I am trying to find a better driver to use with the 570 to get my speeds up, but so far all of the other drivers I have tried kick my 570 into an event id 43 in windows.  If anyone could provide any guidance, I would certainly appreciate it.

All those cards have a date with the recycle bin except for that 570.

[stanfosdguy]

Not sure what I am doing wrong, but I am not having a lot of luck getting things running 'right'.

I am running the following:

windows 7 x64
8GB RAM
16GB VirtualMemory
Powercolor HD7950 3gb
Asus r9 270x 2gb
Sapphire dual-x 280x 3gb
MSI Armor 570 8gb

I am trying to run claymore v11 cryptonote miner.  I am running Crimson 15.12 drivers for the older 3 cards.  I was running 17.11.2 for the 570, but my speeds were really low (~350h/s).  I am trying to find a better driver to use with the 570 to get my speeds up, but so far all of the other drivers I have tried kick my 570 into an event id 43 in windows.  If anyone could provide any guidance, I would certainly appreciate it.

All those cards have a date with the recycle bin except for that 570.

Not that I disagree, but they all make $1/day each or more, so for now, they are ok. I am more interested in getting my 570 running.

[Soliqesh]

My rig with RX570/RX580 4GB upgrade to 930-950h per card, but rig with RX580 8GB have 850H... i tried -h 1800, but no effect. Who have troubles with RX580 8GB?

[dnyt]

Thank you Claymore for releasing v11!

Looking good!

[BSAlex]

Not sure what I am doing wrong, but I am not having a lot of luck getting things running 'right'.

I am running the following:

windows 7 x64
8GB RAM
16GB VirtualMemory
Powercolor HD7950 3gb
Asus r9 270x 2gb
Sapphire dual-x 280x 3gb
MSI Armor 570 8gb

I am trying to run claymore v11 cryptonote miner.  I am running Crimson 15.12 drivers for the older 3 cards.  I was running 17.11.2 for the 570, but my speeds were really low (~350h/s).  I am trying to find a better driver to use with the 570 to get my speeds up, but so far all of the other drivers I have tried kick my 570 into an event id 43 in windows.  If anyone could provide any guidance, I would certainly appreciate it.

All those cards have a date with the recycle bin except for that 570.

Not that I disagree, but they all make $1/day each or more, so for now, they are ok. I am more interested in getting my 570 running.

Best option - run RX 570 in a sepatare system with recent drivers, leave alone you old cards with 15.12 driver as they are still profitable. More interesting way - try to make Docker container with direct access to GPU and run two containers - one with 15.12 and old cards, other - say with blockchain drivers and 570 card. Please note I have not done it myself so please share your case when you'll get it running. Problem is that Claymore miner never was designed for running withing Docker container and no one knows for sure how it will work in it.