MoneroMooo
Legendary
Offline
Activity: 1276
Merit: 1001
|
|
August 09, 2015, 08:23:23 AM |
|
yeah, its your fork of tsivs... though my build environment might be screwy. I can't even run standard cryptonight on your fork... I saw during the build process of ccminer that compute 20 was being used, though I think it should compute 10. I accidentally installed the most recent cuda package via sudo apt-get install nvidia-cuda-toolkit... http://pastebin.com/7u938gqgMost likely seems to be you are using an include file (or compilation options) with a sizeof(cudaDeviceProp) that is smaller than twhat cudaGetDeviceProperties thinks. If you already had it working, I'd make clean, or whatever is the equivalent there. If it's a fresh clone... Can you run any other CUDA program that you compiled in the same way and which uses cudaGetDeviceProperties ? Hmm, one thing you can also try: git checkout 1780acd08b5bbcf0760bbd78bc09653d0705c0b9 Then rebuild all. I pushed a patch to bump a requirement for the CUDA SDK, and I have no idea what it implies, as it was just suggested to me. I guess it might cause this size issue, though I'd kinda expect things to be self consistent.
|
|
|
|
|
|
|
|
Make sure you back up your wallet regularly! Unlike a bank account, nobody can help you if you lose access to your BTC.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
tranzactionezlive
|
|
August 09, 2015, 09:09:11 AM |
|
This is getting frustrating, i'm starting to think there is some sort of bad information going on here.
Why are there tons of disfunctional nodes embedded in the exe file since its been updated yesterday ?
|
|
|
|
BoscoMurray
|
|
August 09, 2015, 09:41:36 AM |
|
This is getting frustrating, i'm starting to think there is some sort of bad information going on here.
Why are there tons of disfunctional nodes embedded in the exe file since its been updated yesterday ?
There is no such thing as embedded disfunctional nodes. There are nodes out there which have not updated, but still try to connect to the network. If your node is up to date, it will reject/disconnect/ban these other nodes. You will see the disconnects as red text in your own node, but this is not a bad thing. Just ignore it.
|
|
|
|
Hix
Legendary
Offline
Activity: 1971
Merit: 1036
|
|
August 09, 2015, 12:07:47 PM |
|
MoneroMooo Pool Pending Balance raising without payouts.
|
|
|
|
MoneroMooo
Legendary
Offline
Activity: 1276
Merit: 1001
|
|
August 09, 2015, 01:44:41 PM |
|
MoneroMooo Pool Pending Balance raising without payouts.
Thanks, I've just consolidated coins again. Payouts will restart as soon as they unlock.
|
|
|
|
chengyz
Newbie
Offline
Activity: 58
Merit: 0
|
|
August 09, 2015, 05:33:24 PM |
|
Why I can not link to the mine pool: http://aeonpool.mooo.com/This is my mining parameters: minerd -a cryptonight -o stratum+tcp://aeonpool.mooo.com:5577 -u WmtVTeq17d57y1gHwB6LwNNR41GwvgdKSBNd272WF7D931cXZRsHtFzTm9JkFHsZbuWV5Pr8Te2dwVV BMZMeo8Pn2Ebx6dZaw -p x [2015-08-10 01:27:31] Using JSON-RPC 2.0 [2015-08-10 01:27:31] Starting Stratum on stratum+tcp://aeonpool.mooo.com:5577 [2015-08-10 01:27:31] 3 miner threads started, using 'cryptonight' algorithm. [2015-08-10 01:27:52] Stratum connection failed: Failed to connect to aeonpool.m ooo.com port 5577: Timed out [2015-08-10 01:27:52] ...retry after 10 seconds
|
|
|
|
MoneroMooo
Legendary
Offline
Activity: 1276
Merit: 1001
|
|
August 09, 2015, 05:51:54 PM |
|
Why I can not link to the mine pool: http://aeonpool.mooo.com/This is my mining parameters: minerd -a cryptonight -o stratum+tcp://aeonpool.mooo.com:5577 -u WmtVTeq17d57y1gHwB6LwNNR41GwvgdKSBNd272WF7D931cXZRsHtFzTm9JkFHsZbuWV5Pr8Te2dwVV BMZMeo8Pn2Ebx6dZaw -p x [2015-08-10 01:27:31] Using JSON-RPC 2.0 [2015-08-10 01:27:31] Starting Stratum on stratum+tcp://aeonpool.mooo.com:5577 [2015-08-10 01:27:31] 3 miner threads started, using 'cryptonight' algorithm. [2015-08-10 01:27:52] Stratum connection failed: Failed to connect to aeonpool.m ooo.com port 5577: Timed out [2015-08-10 01:27:52] ...retry after 10 secondsThere was a recent hardfork. The mining algorithm has changed.You need to do two things: - get an updated miner ( https://github.com/moneromooo/cpuminer-multi or https://github.com/iamsmooth/cpuminer-multi) - replace -a cryptonight with -a cryptonight-light (first miner URL) or -a cryptonight-lite (for second miner URL) If you need windows binaries, they don't seem to be on the first page, but look for posts by Arux (don't download them from any quoted post, just from an original Arux post).
|
|
|
|
chengyz
Newbie
Offline
Activity: 58
Merit: 0
|
|
August 09, 2015, 06:14:19 PM Last edit: August 09, 2015, 07:01:59 PM by chengyz |
|
Why I can not link to the mine pool: http://aeonpool.mooo.com/This is my mining parameters: minerd -a cryptonight -o stratum+tcp://aeonpool.mooo.com:5577 -u WmtVTeq17d57y1gHwB6LwNNR41GwvgdKSBNd272WF7D931cXZRsHtFzTm9JkFHsZbuWV5Pr8Te2dwVV BMZMeo8Pn2Ebx6dZaw -p x [2015-08-10 01:27:31] Using JSON-RPC 2.0 [2015-08-10 01:27:31] Starting Stratum on stratum+tcp://aeonpool.mooo.com:5577 [2015-08-10 01:27:31] 3 miner threads started, using 'cryptonight' algorithm. [2015-08-10 01:27:52] Stratum connection failed: Failed to connect to aeonpool.m ooo.com port 5577: Timed out [2015-08-10 01:27:52] ...retry after 10 secondsThere was a recent hardfork. The mining algorithm has changed.You need to do two things: - get an updated miner ( https://github.com/moneromooo/cpuminer-multi or https://github.com/iamsmooth/cpuminer-multi) - replace -a cryptonight with -a cryptonight-light (first miner URL) or -a cryptonight-lite (for second miner URL) If you need windows binaries, they don't seem to be on the first page, but look for posts by Arux (don't download them from any quoted post, just from an original Arux post). yes,I had updated miner and replace -a cryptonight-light, But the error still exists The strange thing is I'm in the mine pool with this command , it is normal http://52.8.47.33:8080D:\新建文件夹\2>minerd -a cryptonight-light -o stratum+tcp://52.8.47.33:3333 -u WmtVTeq17d57y1gHwB6LwNNR41GwvgdKSBNd272WF7D931cXZRsHtFzTm9JkFHsZbuWV5Pr8Te2dwVV B MZMeo8Pn2Ebx6dZaw -p x [2015-08-10 02:13:27] Using JSON-RPC 2.0 [2015-08-10 02:13:27] Starting Stratum on stratum+tcp://52.8.47.33:3333 [2015-08-10 02:13:27] 3 miner threads started, using 'cryptonight-light' algorit hm. [2015-08-10 02:13:27] Pool set diff to 100 [2015-08-10 02:13:27] Stratum detected new block [2015-08-10 02:13:29] accepted: 1/1 (100.00%), 69.81 H/s at diff 100 (yay!!!) ================================== another mind,Has been circulating , can not properly connected to the mine pool C:\Users\cyz\Downloads\新建文件夹\1>minerd -a cryptonight-lite -o stratum+tcp:// aeonpool.mooo.com:5577 -u WmsFoKjNnCvXkTtVx8zMR8B76rhh8aUs96NkQNVo4TFiBB15ftw2YC Car9utqavY49EbZzuKink5b2NexqgrhJEx2PzbGpU8M -p x -t 2 [2015-08-10 02:57:28] Using JSON-RPC 2.0 [2015-08-10 02:57:28] CPU Supports AES-NI: NO [2015-08-10 02:57:28] Starting Stratum on stratum+tcp://aeonpool.mooo.com:5577 [2015-08-10 02:57:28] 2 miner threads started, using 'cryptonight-lite' algorith m. [2015-08-10 02:57:28] thread 0: 1 hashes, 32.05 H/s [2015-08-10 02:57:30] thread 1: 66 hashes, 28.56 H/s [2015-08-10 02:57:49] Stratum connection failed: Failed to connect to aeonpool.m ooo.com port 5577: Timed out [2015-08-10 02:57:49] ...retry after 10 seconds
|
|
|
|
MoneroMooo
Legendary
Offline
Activity: 1276
Merit: 1001
|
|
August 09, 2015, 07:19:54 PM |
|
That is odd.
The first miner seems to be Wolf's. It works on Arux' pool but not mine, can you confirm ?
The second miner seems to be LJ's. There was a bug in that miner which caused the hashes to be wrong. This was fixed two days ago or so, so make sure you have the most recent version.
If I try your first command:
minerd -a cryptonight-light -o stratum+tcp://52.8.47.33:3333 -u WmtVTeq17d57y1gHwB6LwNNR41GwvgdKSBNd272WF7D931cXZRsHtFzTm9JkFHsZbuWV5Pr8Te2dwVV B MZMeo8Pn2Ebx6dZaw -p x
Then I can connect to Arux' pool, and changing the IP to my pool also works (there was a space in the address, but I think it's just BCT adding it).
I don't see connections for this address apart from my tests, nor bans, so it looks like your connection is stopped before it reaches the server.
|
|
|
|
myagui
Legendary
Offline
Activity: 1154
Merit: 1001
|
|
August 09, 2015, 10:35:38 PM |
|
@GingerAle, I'm out and just online a couple of minutes a day for all of the week ahead, so I can't help much with troubleshooting during this time. However, here are some important basics: - cuda toolkit 7.0 is largely broken, and will cause most miner software to spit invalid hashes - good cuda toolkits are 6.5 (standard, usually fastest), and 7.5 RC (developer exclusive, usually slower, bleeding edge) - you need to edit configure.sh (linux), or VStudio project cuda properties (windows), to match your desired target architecture The miner should launch with the same -l settings as you would previously used with regular cryptonight, but you can add some more blocks or threads as the light variant uses less memory (so you might hash faster with more threads). The light version is selected in ccminer, by adding -A to your launch string. I've had confirmations of the miner working on Windows, on Linux, and all cards of compute level 3.5 & 5.x. Some lower compute levels should also work, but I have no experience on these, nor access to them. I've even used this ccminer on AWS already for kicks, works just fine (and can burn one's credit card really fast) Good Luck!
|
|
|
|
Hix
Legendary
Offline
Activity: 1971
Merit: 1036
|
|
August 10, 2015, 07:22:08 AM |
|
MoneroMooo Pool Pending Balance raising without payouts.
Thanks, I've just consolidated coins again. Payouts will restart as soon as they unlock. no payouts Again
|
|
|
|
MoneroMooo
Legendary
Offline
Activity: 1276
Merit: 1001
|
|
August 10, 2015, 08:11:51 AM |
|
no payouts Again Wow it didn't last long this time. Consolidated again. Interestingly, only one payment per batch failed overnight, and the other 4-5 of each batch went through just fine. Your payment just needs too many outputs I've decreased the batch size as well now, which should help too. Sorry about that.
|
|
|
|
chengyz
Newbie
Offline
Activity: 58
Merit: 0
|
|
August 10, 2015, 11:45:24 AM |
|
That is odd.
The first miner seems to be Wolf's. It works on Arux' pool but not mine, can you confirm ?
The second miner seems to be LJ's. There was a bug in that miner which caused the hashes to be wrong. This was fixed two days ago or so, so make sure you have the most recent version.
If I try your first command:
minerd -a cryptonight-light -o stratum+tcp://52.8.47.33:3333 -u WmtVTeq17d57y1gHwB6LwNNR41GwvgdKSBNd272WF7D931cXZRsHtFzTm9JkFHsZbuWV5Pr8Te2dwVV B MZMeo8Pn2Ebx6dZaw -p x
Then I can connect to Arux' pool, and changing the IP to my pool also works (there was a space in the address, but I think it's just BCT adding it).
I don't see connections for this address apart from my tests, nor bans, so it looks like your connection is stopped before it reaches the server.
I know what the reason, I do not pass your pond wall software Rom(VPN)
|
|
|
|
Hix
Legendary
Offline
Activity: 1971
Merit: 1036
|
|
August 10, 2015, 12:05:21 PM |
|
no payouts Again Wow it didn't last long this time. Consolidated again. Interestingly, only one payment per batch failed overnight, and the other 4-5 of each batch went through just fine. Your payment just needs too many outputs I've decreased the batch size as well now, which should help too. Sorry about that. Yeah, little bit more outputs Thank you
|
|
|
|
MoneroMooo
Legendary
Offline
Activity: 1276
Merit: 1001
|
|
August 10, 2015, 05:22:28 PM |
|
I know what the reason, I do not pass your pond wall software Rom(VPN)
I'm sorry, I can't quite understand what you mean here.
|
|
|
|
smooth
Legendary
Offline
Activity: 2968
Merit: 1198
|
|
August 10, 2015, 05:24:42 PM |
|
I know what the reason, I do not pass your pond wall software Rom(VPN)
I'm sorry, I can't quite understand what you mean here. He can't access your pool, but he can apparently access Arux's pool. There is some kind of firewall or routing issue, maybe GFOC.
|
|
|
|
MoneroMooo
Legendary
Offline
Activity: 1276
Merit: 1001
|
|
August 10, 2015, 06:44:51 PM |
|
Right, I got that I thought he had found the actual reason. I guess it has to be the GF, as he gets the correct IP, but even ping times out (from PM).
|
|
|
|
Arux
|
|
August 10, 2015, 09:03:20 PM Last edit: August 10, 2015, 09:22:56 PM by Arux |
|
I spotted a problem with daemon on my pool. i suspect it to be the source of two orphaned blocks.
to solve it, i will restart a daemon with a new conf in a few moments. (I take this opportunity to upgrade to 0.9.1.1 too) my apologies for the downtime. (espected time: several minutes.) i'm aware it's boring but everything has to be tried against orphaned blocks.
[edit] done. everything must be ok now
|
|
|
|
chengyz
Newbie
Offline
Activity: 58
Merit: 0
|
|
August 11, 2015, 01:27:53 AM |
|
Right, I got that I thought he had found the actual reason. I guess it has to be the GF, as he gets the correct IP, but even ping times out (from PM). Should be the government banned access to your address , only to visit your pool through the wall software
|
|
|
|
danonthehill
|
|
August 11, 2015, 02:09:25 AM |
|
New to Aeon. I like the way things look here. I am taking note of this Cryptonote.
|
|
|
|
|