Storx
|
|
February 06, 2018, 04:24:16 PM |
|
Hi guys,
I don't know whats going on - it doesn't look like the most profitable algo is being mined:
But yet this is what is being mined:
Can anyone please shed some light?
Right click on the miner, then click view details... this will show you the list that the miner is going by based on the profit profile that specific miner is going by... When you view online services, that list is just a list of all algo's you have checked under options... either you have 1 of 2 things happening.. 1) you either have the algo disabled under the profit profile the profit miner is using for profit switching either under profit profile on the list of checked algo's to run on that profile or under managed software. The easiest way to determine if its software settings, look on the miner, find out which profit profile is linked to it, then go to tools, benchmarking... click the profit profile that miner is using and it will display every algo it can switch from and the software it will use. When a miner trys to profit switch, if its enabled but no software or pool available to use it will skip it during the calculations process... 2) you the mining speed saved wrong under that profit profile, when you setup a profit miner, you select a profit profile, that profit profile has its own speeds based on each algo that typically comes from benchmarking the system. If you skip this process and try to mine off default values, it may be seeing it as not the most profitable miner.
|
- GPUs Mining : 128 (Updated 3/7/18) // CPUs Mining : 19 (Updated 2/23/18)
|
|
|
naK2
Newbie
Offline
Activity: 21
Merit: 0
|
|
February 06, 2018, 04:28:43 PM |
|
Thanks for the detailed response. I'll check it out when I'm back at the rig
|
|
|
|
Storx
|
|
February 06, 2018, 04:29:08 PM |
|
hi, i have read a lot of posts here but could not get to make my awesome miner for profit switching with StarPool/Granatgas pool and Antminer D3. I do find settings for predefined pools but how to add custom pool and their profit info so that AM can efficiently switch between them.
The way you profit switch custom pools not pre-programed into the software is to add the pools for each algo you want to use, then assign a pool group and add all those pools under that pool group. Then you profit switch based on that pool group by selecting it under profit switching on options. This is how i get mine to work. You need to use a managed miner to test out each pool you add to the pool group, i found that if one pool is not setup correctly it would confuse the miner and not work for some reason, so i had to test every pool i tried tell they all worked. I profit switch SuprNova this way, i then use Gunbot in emergency sell mode to detect any deposits to my exchange account from any of those algo's im profit switching between, it checks all of them every 5 minutes and if it sees new coins to sell, it dumps them at last asking price tell the wallet is empty.
|
- GPUs Mining : 128 (Updated 3/7/18) // CPUs Mining : 19 (Updated 2/23/18)
|
|
|
yhbae
Newbie
Offline
Activity: 119
Merit: 0
|
|
February 06, 2018, 04:47:14 PM |
|
What is the best way to calculate the "profitability" of a coin not already predefined in AM?
I can see that you can use the API (either C% or HTTP) to update the values but are there any sensible ways to calculate this out in real-time?
Currently, I am using Google Sheet to update the earnings, so I can calculate this value based on the received earnings but I can't do this throughout the day...
Thank you!
|
|
|
|
yrk1957
Member
Offline
Activity: 531
Merit: 29
|
|
February 06, 2018, 05:06:17 PM |
|
This built-in miners need a serious upgrade.
I tested the built-in ccminer vs Excavator (1.4.2.a) on AHashPool and found that Excavator is faster as follows:
Blake2s - 16% Faster NeoScrypt - 30% Faster
These figures are nothing to joke about when it comes to dollars.
I hope the author seriously considers at least upgrading to the latest Excavator. Otherwise we are all loosing money big time.
(Note: I was able to configure the latest Excavator to run with AM, it can start/stop/monitor it, but does not report any metrics). And profit switching of course does not work.
Sadly, while some excavator support was added as 'External Miner", its pretty pointless for using with Profit switching. If anyone is using these algos with built-in miner, then they are literally throwing money down the toilet. I simply can't use AM with this situation.
|
|
|
|
tufail_74
Newbie
Offline
Activity: 72
Merit: 0
|
|
February 06, 2018, 05:09:07 PM |
|
hi, i have read a lot of posts here but could not get to make my awesome miner for profit switching with StarPool/Granatgas pool and Antminer D3. I do find settings for predefined pools but how to add custom pool and their profit info so that AM can efficiently switch between them.
The way you profit switch custom pools not pre-programed into the software is to add the pools for each algo you want to use, then assign a pool group and add all those pools under that pool group. Then you profit switch based on that pool group by selecting it under profit switching on options. This is how i get mine to work. You need to use a managed miner to test out each pool you add to the pool group, i found that if one pool is not setup correctly it would confuse the miner and not work for some reason, so i had to test every pool i tried tell they all worked. I profit switch SuprNova this way, i then use Gunbot in emergency sell mode to detect any deposits to my exchange account from any of those algo's im profit switching between, it checks all of them every 5 minutes and if it sees new coins to sell, it dumps them at last asking price tell the wallet is empty. thanks @storx, i shall give it try as described.
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
February 06, 2018, 05:33:22 PM |
|
I've noted your request, and I fully understand your requirement.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
February 06, 2018, 05:36:44 PM |
|
Glad to see the continual support and evolution of AM. You guys are doing a great job.
Any thoughts or ETA on better support for the Bitmain AntRouter R1LTC? I know its probably not a major in-demand thing, but we're having fun with these to speculate on various coins, and they're pretty neat units considering. I'd hope its not too much on your end to bring in full support.
Thanks in advance.
Thanks! Antmienr R1LTC should already be supported. I don't have this device myself so I can't really verify. Is there a specific feature not working?
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
February 06, 2018, 05:39:17 PM |
|
Can anyone help getting the webserver to work remotely? Works fine on localhost, but not on other machines on the same network! I see these errors in the log, which I suspect is the issue, but no idea how to fix it! 06/02/2018 10:18:23.047 [023] [S]ChannelFactoryProvider: Create Channel Factory: IntelliBreeze.Maintenance.Service.Contracts.ServiceContracts.ISecurityService 06/02/2018 10:18:23.048 [023] [E]ChannelFactoryProvider: Channel faulted 06/02/2018 10:18:23.052 [023] [E] Failed remote: net.pipe://localhost/IntelliBreezeService/Security 06/02/2018 10:18:23.057 [023] [S]ChannelFactoryProvider: Create Channel Factory: IntelliBreeze.Maintenance.Service.Contracts.ServiceContracts.ISecurityService 06/02/2018 10:18:23.058 [023] [E]ChannelFactoryProvider: Channel faulted 06/02/2018 10:18:23.060 [023] [E] Failed remote: net.pipe://localhost/IntelliBreezeService/Security 06/02/2018 10:18:23.065 [023] [S]Web Server prepare port 17790, Result: False 06/02/2018 10:18:23.065 [023] [S]Stopping Web Server This is a permission failure, where Awesome Miner isn't allowed to listen to port 17790 for HTTP purposes. You could try to run Awesome Miner with Administrator privileges once, to see if it setup everything properly. Then you should be able to run it normally again.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
February 06, 2018, 05:42:50 PM |
|
Awesome Miner version 4.4.1
- Cloud Services: Multiple Telegram clients can sign in and get notifications from Awesome Miner - Cloud Services: Heartbeat feature includes support for Telegram notifications - Display of Accepted and Rejected shares per GPU for Claymore Ethereum miner - Configuration of automatic restart of crashed miner can be disabled by setting 0 restart attempts in the Options dialog, Advanced section - Trigger for Check Statistics adds support for evaluating Rejected shares in addition to Accepted shares. - Trigger for Computer Idle adds support for specifying time in seconds instead of minutes - Notification list support keyboard shortcut Ctrl+A and Ctrl+C to copy all notifications to clipboard - Awesome Miner API for miners includes hashrate value specified as a number - Profit switcher will show error message if no pool can fulfill the requirements of the selected combination of algorithms and mining software - Excavator 1.4 supported as External Miner - Alexis Ccminer version updated - Corrected hashrate summary when moving miners between groups - Minor corrections
Thanks for the Excavator support! I want to configure excavator and I added external miner excavator (latest) but I am undable to benchmark or start mining with excavator. Do you have any tutorial about how to configure the latest version of excavator ? Why can't we use excavator with "managed profit miner" by adding excavator to "user defined mining software" and select compatibility "excavator latest" ? Trying to figure out. No luck as yet... Awesome Miner v4.4.1 included support for the latest Excavator software as an External Miner only. It was intended as a preview and the idea is of course to add it as a Managed Miner and for the profit switcher in the next release. I'm current working on this and I fully understand the importance of it. For more details on Excavator support, please see my notes about this in the previous post: https://bitcointalk.org/index.php?topic=676942.msg29615042#msg29615042
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
February 06, 2018, 05:45:23 PM |
|
When can we expect to see support for Bminer? It's easily the fastest equihash miner available right now for CUDA mining. https://bitcointalk.org/index.php?topic=2519271.0Has anyone else gotten this working as external software? I've added it by following all of the steps in the documentation but when AwesomeMiner tries to run it the cmd prompt opens then closes right away. Bminer works correctly on this system if I run it on it's own. Thanks for your feedback. This one is on my todo-list. After the Excavator mining software is fully supported (not finalized yet), the next mining software to support might very well be Bminer.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
Amstellodamois
Newbie
Offline
Activity: 182
Merit: 0
|
|
February 06, 2018, 06:44:57 PM |
|
I'd like to split my rig's gains to two addresses. How could I do that easily with Awesome miner? Could I create two miners and have one running overridden pool parameters and comand line parameters? Both would run at the same time.
Or could I have two miners running each the 12 cards but alternatively (let's say 1 hour each, for instance)?
|
|
|
|
BCCrypto68
Newbie
Offline
Activity: 27
Merit: 0
|
|
February 06, 2018, 08:37:19 PM |
|
I'd like to split my rig's gains to two addresses. How could I do that easily with Awesome miner? Could I create two miners and have one running overridden pool parameters and comand line parameters? Both would run at the same time.
Or could I have two miners running each the 12 cards but alternatively (let's say 1 hour each, for instance)?
You could run multiple miners on the same rig no problem, as well as have time based switching. I do both of these.
|
|
|
|
Arackis
Newbie
Offline
Activity: 3
Merit: 0
|
|
February 06, 2018, 09:20:34 PM |
|
Any one else having problems with mining pool hub? It shuts down as soon as I start Awesome miner.
Starting Diagnostics. Awesome Miner version: 4.4.1 Starting Mining Software Setting up Miner Engine. Instance: 1 Engine Type: ZecEwbfMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable: Added rule for: C:\Users\jcndj\AppData\Local\AwesomeMiner\Zec.miner.0.3.4b_1\0.3.4b\miner.exe C:\Users\jcndj\AppData\Local\AwesomeMiner\Zec.miner.0.3.4b_1\0.3.4b\miner.exe --server us-east.us-east.equihash-hub.miningpoolhub.com --port 20594 --user Arackis.Arackis --pass x --api 0.0.0.0:4028 (WindowMode: ConsoleFormat, EngineType: ZecEwbfMiner, IsProfitMiner: True) Configuration:
> +-------------------------------------------------+ > | EWBF's Zcash CUDA miner. 0.3.4b | > +-------------------------------------------------+ > INFO: Current pool: us-east.us-east.equihash-hub.miningpoolhub.com:20594 > INFO: Selected pools: 1 > INFO: Solver: Auto. > INFO: Devices: All. > INFO: Temperature limit: 90 > INFO: Api: Listen on 0.0.0.0:4028 > --------------------------------------------------- > ERROR: Cannot resolve hostname Failed to start miner process: Process has exited, so the requested information is not available. Failed to start miner in Diagnostics mode Diagnostics completed
look at the address you have set for MPH us-east.us-east.equihash-hub.miningpoolhub.com:20594 guessing that us-east shouldn't be in there twice I see that and I have tried to change it. I'm doing a managed profit miner and it auto fills that. All I'm putting in is my login and worker and selecting usa. I have tried selecting other regions but that does not work either. Is there a place to edit that that I don't know about?
|
|
|
|
exsexs1
Newbie
Offline
Activity: 31
Merit: 0
|
|
February 06, 2018, 09:29:29 PM |
|
How to set if "Stratum authentication failed" or other pool connection error, awesome miner jump to other pool? I maked pool group, but not jumped to next pool.
|
|
|
|
Mr.Spider703
Member
Offline
Activity: 392
Merit: 27
http://radio.r41.ru
|
|
February 06, 2018, 10:15:33 PM Last edit: February 06, 2018, 10:25:54 PM by Mr.Spider703 |
|
This built-in miners need a serious upgrade.
I tested the built-in ccminer vs Excavator (1.4.2.a) on AHashPool and found that Excavator is faster as follows:
Blake2s - 16% Faster NeoScrypt - 30% Faster
These figures are nothing to joke about when it comes to dollars.
I hope the author seriously considers at least upgrading to the latest Excavator. Otherwise we are all loosing money big time.
(Note: I was able to configure the latest Excavator to run with AM, it can start/stop/monitor it, but does not report any metrics). And profit switching of course does not work.
Sadly, while some excavator support was added as 'External Miner", its pretty pointless for using with Profit switching. If anyone is using these algos with built-in miner, then they are literally throwing money down the toilet. I simply can't use AM with this situation. I wrote above that I took a new excavator and file json from multipoolminer and it works in AM Only when he pointed out the miner chose him as ccminer, not excavator(latested) Hashrefinery_NeoScrypt_1J6ERS9LjhRhXkifkVfdpbP56aY7TLqEoe_1.json [ { "time": 0, "commands": [ { "id": 1, "method": "algorithm.add", "params": [ "neoscrypt", "204.27.59.90:4233", "1J6ERS9LjhRhXkifkVfdpbP56aY7TLqEoe:home_video_card,c=BTC" ] } ] }, { "time": 3, "commands": [ { "id": 1, "method": "worker.add", "params": [ "0", "0" ] } ] }, { "time": 3, "commands": [ { "id": 1, "method": "worker.add", "params": [ "0", "1" ] } ] }, { "time": 3, "commands": [ { "id": 1, "method": "worker.add", "params": [ "0", "2" ] } ] }, { "time": 3, "commands": [ { "id": 1, "method": "worker.add", "params": [ "0", "3" ] } ] }, { "time": 3, "commands": [ { "id": 1, "method": "worker.add", "params": [ "0", "4" ] } ] }, { "time": 3, "commands": [ { "id": 1, "method": "worker.add", "params": [ "0", "5" ] } ] }, { "time": 10, "loop": 10, "commands": [ { "id": 1, "method": "algorithm.print.speeds", "params": [ "0" ] } ] } ]
sorry, i don't know how to under the spoiler how to make an analogy for this file to be for all pools and to take pools from AM
|
|
|
|
Amstellodamois
Newbie
Offline
Activity: 182
Merit: 0
|
|
February 06, 2018, 10:18:37 PM |
|
I'd like to split my rig's gains to two addresses. How could I do that easily with Awesome miner? Could I create two miners and have one running overridden pool parameters and comand line parameters? Both would run at the same time.
Or could I have two miners running each the 12 cards but alternatively (let's say 1 hour each, for instance)? You could run multiple miners on the same rig no problem But can you do so with the Awesome miner profit switching? as well as have time based switching. What solution did you choose?
|
|
|
|
Mr.Spider703
Member
Offline
Activity: 392
Merit: 27
http://radio.r41.ru
|
|
February 06, 2018, 10:37:21 PM |
|
Build time: 2018-01-30 14:42:24 Build number: 4475 Provided startup commandline: "C:\Users\Home\AppData\Local\AwesomeMiner\Excavator\excavator.exe" -c H ashrefinery_NeoScrypt_1J6ERS9LjhRhXkifkVfdpbP56aY7TLqEoe_1.json -a neoscrypt -o stratum+tcp://neoscrypt.us.hashrefinery.com:4233 -u 1J6ERS9LjhRhXkifkVfdpbP56aY7 TLqEoe -p c=BTC -b 0.0.0.0:4028
it turns out such a picture, how to make the neoscript work on all the pools?
|
|
|
|
yrk1957
Member
Offline
Activity: 531
Merit: 29
|
|
February 06, 2018, 11:30:16 PM |
|
Build time: 2018-01-30 14:42:24 Build number: 4475 Provided startup commandline: "C:\Users\Home\AppData\Local\AwesomeMiner\Excavator\excavator.exe" -c H ashrefinery_NeoScrypt_1J6ERS9LjhRhXkifkVfdpbP56aY7TLqEoe_1.json -a neoscrypt -o stratum+tcp://neoscrypt.us.hashrefinery.com:4233 -u 1J6ERS9LjhRhXkifkVfdpbP56aY7 TLqEoe -p c=BTC -b 0.0.0.0:4028
it turns out such a picture, how to make the neoscript work on all the pools?
That's the problem. We can create multiple files for each algo for one pool, but there is no feasible way to provide multiple files for multiple pools. So if we wanted to only stay in Ahashpool and switch between algos only in Ahashpool, then that is possible.
|
|
|
|
fecker
Jr. Member
Offline
Activity: 30
Merit: 3
|
|
February 06, 2018, 11:53:09 PM |
|
Guys, How do I load OC profile(saved in AM) automatically after PC restart? I cant find the option about "load OC profile at startup". Thanks
|
|
|
|
|