[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[MinLum]

Are you only looking to pass the dev=0,1,2  command through AM to DSTM miner? (I will be home in about an hour and will get back with you)
Also AM can individually enable/disable GPU's as well if that is the objective you are trying to do.

Yes, just that.  I just want to enable/disable GPUs as I'm planning to do some testing and want to run AM and NH at the same time.

I don't know for DSTM but in general with miners, either you use the config file (the simply run the exe with ZERO parameter), OR you pass parameters, in a batch or cmd file.
In general, you CANNOT do both.

If you've some specific parameters, then you may try to rename the config file as *.old for example, and pass ALL the parameters with AM.

Well, I was trying with both the dev command through AM and in the .cfg file with no luck.  At this moment, I've taken out all instructions from AM but the dev command is still in the .cfg file, still does not work.

[Nexillus]

Are you only looking to pass the dev=0,1,2  command through AM to DSTM miner? (I will be home in about an hour and will get back with you)
Also AM can individually enable/disable GPU's as well if that is the objective you are trying to do.

Yes, just that.  I just want to enable/disable GPUs as I'm planning to do some testing and want to run AM and NH at the same time.

I don't know for DSTM but in general with miners, either you use the config file (the simply run the exe with ZERO parameter), OR you pass parameters, in a batch or cmd file.
In general, you CANNOT do both.

If you've some specific parameters, then you may try to rename the config file as *.old for example, and pass ALL the parameters with AM.

Well, I was trying with both the dev command through AM and in the .cfg file with no luck.  At this moment, I've taken out all instructions from AM but the dev command is still in the .cfg file, still does not work.

Go to Options->Profit Profiles. In the Profit switching profiles select the profile that applies to you, in my case "nVidia GPU". Then select "Edit" Click on the miner you want to use. Click on it, click Configure. Then Select "new" in which at this point you can specify the number of GPU's you want to use or detect from host per device.

[Blogster]

how can i change the server urls from zerg pool to EU?
EU server
-o stratum+tcp://europe.mine.zergpool.com:<PORT> -u <WALLET_ADDRESS> [-p <OPTIONS>]

Tried to change under online service. All changes on predefined coins are lost after restart and doesnt work.
Tried to to add the coin unter custom doesnt work.
Theres btw no template for zergpool like for zpool.

[MinLum]

Did you (manually) try --list-devices to see which devices it sees? Did you try manually, locally, from the miner, NOT through AM, and does this work?

Not sure what you are asking specifically, but yes, if i go through the miner directly, I can make it run only 3 GPUs.

Ahh I see - next time read the readme ;-)

    --dev            Space separated list of cuda devices

In short, not --dev=0,1,2 but --dev 0 1 2
(no "=", no comma)

No, the readme says space separated but the config shows comma separated.
dev=0,1,2 is what I'm using successfully
dev=0 1 2 and the miner will only run GPU0

I have read the readme   And that's why I can get the miner to work..... but no luck when going through Awesome Miner

Go to Options->Profit Profiles. In the Profit switching profiles select the profile that applies to you, in my case "nVidia GPU". Then select "Edit" Click on the miner you want to use. Click on it, click Configure. Then Select "new" in which at this point you can specify the number of GPU's you want to use or detect from host per device.

Following your instructions but I can't click on "new" afte Configure, the button is greyed out and unclickable.  This is on DSTM Zcash Cuda Miner.

[MinLum]

Ahh I see - next time read the readme ;-)

    --dev            Space separated list of cuda devices

In short, not --dev=0,1,2 but --dev 0 1 2
(no "=", no comma)

Found it!
--dev 0 1 2 works in AM, but not in the cfg file
dev=0,1,2 works in the cfg file, but not in AM

Thanks for the help guys!!

[MinLum]

Oh God, that wasn't easy! Great you tried and found out!

Glad to see I wasn't the only one that found this confusing  Thanks for making me look there again though!  I kept trying dev=0,1,2 because I proved it was working direct in the miner cfg file, who would've thought the AM parameter needed to be a different syntax?

I kept trying different variations in AM but they all had "=" so even just trying dev=0 would not work.

[spinlock]

Hi folks,

I hope this is the right place to ask this question, so if not, I would appreciate any direction.

I bought a Premium license for AwesomeMiner yesterday.  I used Options | Registration to enter my email and the key I received via email.  I clicked the Verify button, and all looked fine.

But when I go to Options | Web, I CANNOT enable the API  - it's greyed out and inactive.  I've restarted AM, rebooted, no luck.

I bought the premium licenses specifically for API access, so this is a major issue for me.  Any help would be greatly appreciated!

Thanks,

ws

Anyone?  Help please?

[moppidoo]

Hi folks,

I hope this is the right place to ask this question, so if not, I would appreciate any direction.

I bought a Premium license for AwesomeMiner yesterday.  I used Options | Registration to enter my email and the key I received via email.  I clicked the Verify button, and all looked fine.

But when I go to Options | Web, I CANNOT enable the API  - it's greyed out and inactive.  I've restarted AM, rebooted, no luck.

I bought the premium licenses specifically for API access, so this is a major issue for me.  Any help would be greatly appreciated!

Thanks,

ws

Anyone?  Help please?

Confirming your edition is premium on lower left corner of AM window.

Also, did you enable the Local Web Server? it is required before you can enable the API.

[spinlock]

Confirming your edition is premium on lower left corner of AM window.

Also, did you enable the Local Web Server? it is required before you can enable the API.

Yes, lower left corner says "v4.5 Premium Edition".

BINGO!  Enabling the local web server fixed it.  THANK YOU!

[MHyza]

Hi, Awesome Miner is better and better, thank you for your nice work, Patrike and team.

I have a question: Why is algo PHI never work on Zergpool? It is not showing in Online services, but Ahashpool is there and its mining normally. When I use another SW for mining, PHI on Zergpool is mining fine. Can you check, please?

[akadamson]

Hi, Awesome Miner is better and better, thank you for your nice work, Patrike and team.

I have a question: Why is algo PHI never work on Zergpool? It is not showing in Online services, but Ahashpool is there and its mining normally. When I use another SW for mining, PHI on Zergpool is mining fine. Can you check, please?

go to the options and under online services add it as a user defined, it's not in the pre-defined for zergpool

[toptek]

how can i change the server urls from zerg pool to EU?
EU server
-o stratum+tcp://europe.mine.zergpool.com:<PORT> -u <WALLET_ADDRESS> [-p <OPTIONS>]

Tried to change under online service. All changes on predefined coins are lost after restart and doesnt work.
Tried to to add the coin unter custom doesnt work.
Theres btw no template for zergpool like for zpool.

when you make a pool you can set it to any URL/pool you want.and when you make that pool there is links on the left side the last one down lets you add that kind stuff per pool setting .  or you can right click the miner in the main ui for AM on the left is more links the third one down lets u add custom commands or bat file commands. but those setting are global unlike the per pool setting when you make the pool . if your asking that .....

an you can make your own templates with templates.

[MHyza]

Hi, Awesome Miner is better and better, thank you for your nice work, Patrike and team.

I have a question: Why is algo PHI never work on Zergpool? It is not showing in Online services, but Ahashpool is there and its mining normally. When I use another SW for mining, PHI on Zergpool is mining fine. Can you check, please?

go to the options and under online services add it as a user defined, it's not in the pre-defined for zergpool

Thank you, it is working fine!

[froster555]

Hi
version 4.5, standard edition. In the rig there are 10 cards, 7*1080ti, 3*1070. The program does not see one 1080ti card, although in the system it is determined and NicehashMinerLegacy sees all 10 cards. Tell me how to solve the problem.

Is the mining software like Claymore Ethereum miner reporting 10 GPU's, and those 10 show up on the GPU tab in the lower part of the screen in Awesome Miner? But the GPU mapping feature only lists 9 cards?

I use only ccminer (Zergpool,Lyra2z). Sometimes its start with 10, sometimes with 9 GPU's. GPU mapping feature list cards shows as much as it works in ccminer.

[jamesmbond]

Would love to see feature to quickly (across multiple miners) turn on and off Autostart.   

Details:  I have 5 miners configured both as Managed Profit Miners and as "regular" miners (non profit).   When I want to turn off my managed profit miners to mine a specific coin, changing properties of every managed miner to turn off autorestart is a bit annoying/time consuming.   Since any miner (managed profit or regular) sometimes restart or reboot due to mining errors/stuck processing, this causes both the regular miner and the now-unwanted profit miner to automatically start at same time whenever a reboot of miner occurs.    So I would love some better method of "one button" turning automatic start on or off for a group of miners rather than changing properties of each individual miner.   Finally I understand managed templates can be applied but not to profit miners where I just want to turn on/off the autostart property.

[eminer001]

A question Patrike,

I noticed the new version from yesterday of NemosMiner has a lot more miners for various algos (ccminerpolytimos, RavenMiner225RVN, ccminerskunk, and many more ) than you have by default in AM.

Can you improve benchmarking as I suggested in the past, to have an in depth mining that will also select the most profitable miner for each algo ?

Also NemosMiner implemented a better profit switching algorithm and many users will switch from AwesomeMiner to Nemos soon because it offers better daily income than AwesomeMiner just because it picks miners and algos are switching in a smarter way. NemosMiner is computing and using a parameter called TrustLevel, that is a difference between estimated and actual 24h profitability for each algo from each pool.

What do you think ?

[soothaa]

Good morning Patrike, I've got a few development requests for you today  

I'm not sure if this is even possible, but is there a way my plugins can externally use your C# interface so you don't have to keep making HTTP APIs? All the code I am writing is in C# anyway.. seems like duplicated effort.

And if the above isn't possible..

HTTP API Request

Can I get a way to set a coins image in the coin view? When the entire coin view is just "?" images it's a little depressing looking. A POST with a filesystem path to the img would be great! (Highly desired!)

Interface Additions Request
If possible, add a column on the "Coins" tab called "Coins Per Day" which will of course calculate your hashrate and the coin specs and show an estimated number of coins
If possible, add a column on the "Coins" tab called "Coin Rating" with an HTTP API to set a numeric value (0-10)
If possible, add a column on the "Coins" tab called "Coin Liquidity" (will represent coins BTC trading volume) with an HTTP API to set a numeric value (any)
If possible, make these new columns able to be toggled on/off so people not using my plugins do not have a more cluttered interface (although I think #1 will be useful to all)

As always, thank you!

[Kelsier]

any chance we could get a sum of the BTC unpaid column in Balances, the way the $ unpaid is summed?

Would be quite useful as this column should always be increasing (until payment) whereas $ can fluctuate up and down

if it would be too long to insert directly, then perhaps a tooltip?

[kilo17]

I posted this on the Inno A4+ thread but thought it may be helpful here for people.

Here is a script I wrote to make it easy to add the --api extras.  Just change the xxx.xxx.xxx.xxx to the IP of the miner and make sure to make it s .sh file and give it Permissions to execute as a program.

Cheers...

btw - this was written for linux systems (in case you did not know  )

Code:

#!/bin/sh

HOST='xxx.xxx.xxx.xxx 8100'
USER='root'
PASSWD='t1t2t3a5'
CMD=''

(
echo open "$HOST"
sleep 2
echo "$USER"
sleep 2
echo "$PASSWD"
sleep 2
echo "cd /home/inno_py/"
sleep 2
echo "mount / -o rw,remount"
sleep 2
echo "vi -c ':%s@--api-listen@--api-listen --api-network --api-allow W:0/0@g' -c wq /home/inno_py/inno_config.py"
sleep 2

) | telnet

[NetfetMiningCompany]

It seems the 19 card ASUS boards are impossible to benchmark if you multi card. Is there no way to group certain GPUs to test as "combined"? I cant bench all nvidia then all AMD. Its just all cards, or one by one. Its basically pointless with any of these new +12 boards. Only option now is to only run miners that will completely segregate the cards like ccminer and castxmr. Where if I want to bench phoenix it will just use all cards since its a dual miner.

Also SG miner seems like it wont bench either. All of the benches require manual inputs for URL and the like for each test. Is there a way to change that? I cant benchmark anything that uses sgminer.