clicknbuyit
Newbie
Offline
Activity: 15
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2013, 12:53:10 AM |
|
I'm likely using the same hardware that you have. Can you (or have you in another thread?) let us know what software you are running these with? Are you on a windows machine? Thanks in advance! judging by the picture its cgminer 3.1.1 (bitminter) and .bat would indicate windows I have (12) asic erupters. I have Windows 8. Could you give me instructions on how to set up cgminer 3.1.1 with the asic eupters. Thankyou.
|
|
|
|
atariguy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2013, 03:21:05 AM |
|
Go to BTCGuild and follow their instructions for BFGMiner. It's much easier.
|
|
|
|
batt01
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2013, 04:47:01 AM Last edit: July 23, 2013, 05:01:25 AM by batt01 |
|
Go to BTCGuild and follow their instructions for BFGMiner. It's much easier.
I would suggest 50btc or bitminter....I think BTCGuild is throttling new member to keep below 51% MinePeon is what I am using works out the gate no problems. Here are a pic of my first asic running a blistering 335 mega hash. I will be a btc millionare in a few hundred years. ![Shocked](https://bitcointalk.org/Smileys/default/shocked.gif) I am still running a gpu as well for a total of 930Mh/s. I have ordered 5 more block erupters. I will prolly stop there. I am putting most of my BTC into mining shares. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi46.photobucket.com%2Falbums%2Ff143%2Fbatt01%2F2013-07-22231834.jpg&t=665&c=z5uQ9rEX-Mbklg) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fs46.photobucket.com%2Fuser%2Fbatt01%2Fmedia%2FIMG_20130722_232054.jpg.html&t=665&c=4g460bBRTZf1Rw) login as: minepeon minepeon@192.168.1.123's cgminer version 3.3.1 - Started: [2013-07-22 20:30:31] -------------------------------------------------------------------------------- (5s):478.3M (avg):335.5Mh/s | A:2608 R:11 HW:30 WU:4.7/m ST: 2 SS: 0 NB: 59 LW: 14268 GF: 1 RF: 0 Connected to stratum.50btc.com diff 1 with stratum as user GeorgeZimmerman@ahole.com Block: 007dc993dfc7272f... Diff:31.3M Started: [05:46:38] Best share: 7.41K -------------------------------------------------------------------------------- [P]ool management ettings [D]isplay options [Q]uit AMU 0: | 335.6M/335.5Mh/s | A:2608 R:11 HW:30 WU:4.7/m --------------------------------------------------------------------------------
[2013-07-23 05:47:52] Accepted 1ffd996f Diff 8/1 AMU 0 [2013-07-23 05:48:13] Accepted c9596b1b Diff 1/1 AMU 0 [2013-07-23 05:48:35] Accepted bfdeaba2 Diff 1/1 AMU 0 [2013-07-23 05:48:50] Accepted 3416bafc Diff 4/1 AMU 0 [2013-07-23 05:48:52] Accepted 56790938 Diff 2/1 AMU 0 [2013-07-23 05:48:54] Accepted 41f318d3 Diff 3/1 AMU 0 [2013-07-23 05:49:09] Accepted 6da65ecf Diff 2/1 AMU 0 [2013-07-23 05:49:22] Accepted ecd40581 Diff 1/1 AMU 0 [2013-07-23 05:49:24] Accepted 2d3ae76a Diff 5/1 AMU 0 [2013-07-23 05:49:31] Accepted 72824147 Diff 2/1 AMU 0 [2013-07-23 05:49:41] Accepted ba8f1bc4 Diff 1/1 AMU 0 [2013-07-23 05:50:13] Accepted 7c2b8332 Diff 2/1 AMU 0
|
|
|
|
atariguy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2013, 05:04:20 AM |
|
Go to BTCGuild and follow their instructions for BFGMiner. It's much easier.
I would suggest 50btc or bitminter....I think BTCGuild is throttling new member to keep below 51% MinePeon is what I am using works out the gate no problems. Here are a pic of my first asic running a blistering 335 mega hash. I will be a btc millionare in a few hundred years. ![Shocked](https://bitcointalk.org/Smileys/default/shocked.gif) I am still running a gpu as well for a total of 930Mh/s. I have ordered 5 more block erupters. I will prolly stop there. I am putting most of my BTC into mining shares. Yeah, I wasn't necessarily meaning you should mine with BTCGuild, they just have really good instructions. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I actually use abcpool.co for my mining. I've currently got 2 x 7950 and 4 x USB Block Eruptors, which puts me at about 2.3 GH/s. Which puts me at about where I was at a month ago with just the 2 x 7950s...
|
|
|
|
DennisD7
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 25, 2013, 01:29:19 PM |
|
OK, time to post a picture of my rig. It is the first time I have a dedicated rig running 24/7. The mainboard is a Zotac D2550-ITX WiFi sporting an mSATA SSD. The rest you can probably see: that's an Anker 10-port powered USB-hub, with an Arctic Cooling USB fan, and of course 9 USB Block Eruptors. The whole package provides 3 GH/s and it runs on wifi at the moment. My future plan is to build this into an outdoors-safe box and place it in my garden. I will also connect 4 BFL units (if and when they arrive). ![](https://ip.bitcointalk.org/?u=http%3A%2F%2F24.media.tumblr.com%2F87c1e422731525a486ceea29d08e99b9%2Ftumblr_mqhtvy6H471qa6usno1_1280.jpg&t=665&c=5-EjoaHuXhuM7w)
|
Proud ASIC miner and long term Bitcoin investor
|
|
|
batt01
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 25, 2013, 02:04:34 PM |
|
Nice set up. I also have a Zotac mini. It bought a bare bone unit from Newegg. However I use it as an HTPC. I run XBMC and Plex Media Center on it. A Raspberry Pi is a much lower cost option, but your are limited to USB 2.0 hubs.
|
|
|
|
DennisD7
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 25, 2013, 03:07:17 PM |
|
Nice set up. I also have a Zotac mini. It bought a bare bone unit from Newegg. However I use it as an HTPC. I run XBMC and Plex Media Center on it. A Raspberry Pi is a much lower cost option, but your are limited to USB 2.0 hubs.
Thanks! Yeah, I know this wasn't the most cost-efficient option, but it's a one time cost. And this way I can stay as generic as possible - running Windows 7 means I have a familiar environment, and it should be pretty straightforward to expand the rig.
|
Proud ASIC miner and long term Bitcoin investor
|
|
|
atariguy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 25, 2013, 03:41:13 PM |
|
Go to BTCGuild and follow their instructions for BFGMiner. It's much easier.
I would suggest 50btc or bitminter....I think BTCGuild is throttling new member to keep below 51% MinePeon is what I am using works out the gate no problems. Here are a pic of my first asic running a blistering 335 mega hash. I will be a btc millionare in a few hundred years. ![Shocked](https://bitcointalk.org/Smileys/default/shocked.gif) I am still running a gpu as well for a total of 930Mh/s. I have ordered 5 more block erupters. I will prolly stop there. I am putting most of my BTC into mining shares. Yeah, I wasn't necessarily meaning you should mine with BTCGuild, they just have really good instructions. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I actually use abcpool.co for my mining. I've currently got 2 x 7950 and 4 x USB Block Eruptors, which puts me at about 2.3 GH/s. Which puts me at about where I was at a month ago with just the 2 x 7950s... Hey, thanks for the tip on MinePeon, by the way. I realized I have a Raspberry Pi sitting in a box doing nothing, so I moved my Block Eruptors over to it. That's definitely the easiest setup I've ever done.
|
|
|
|
batt01
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 25, 2013, 05:49:02 PM |
|
Hey, thanks for the tip on MinePeon, by the way. I realized I have a Raspberry Pi sitting in a box doing nothing, so I moved my Block Eruptors over to it. That's definitely the easiest setup I've ever done. You are welcome. What USB hub are you using, and how many erupters. I really want something like the Anker, top mounted plugs and 10 ports that works with the Pi? Yes, mine was just catching dust. I just got is as a toy, and something to get better at Linux. I have had it Pi ruinng as a Really slow desktop PC, a PXB with PBX in a Fash, a HTPC with XBMC and now MinePeon. MP is the best use so far.
|
|
|
|
atariguy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 25, 2013, 06:24:43 PM |
|
Hey, thanks for the tip on MinePeon, by the way. I realized I have a Raspberry Pi sitting in a box doing nothing, so I moved my Block Eruptors over to it. That's definitely the easiest setup I've ever done. You are welcome. What USB hub are you using, and how many erupters. I really want something like the Anker, top mounted plugs and 10 ports that works with the Pi? Yes, mine was just catching dust. I just got is as a toy, and something to get better at Linux. I have had it Pi ruinng as a Really slow desktop PC, a PXB with PBX in a Fash, a HTPC with XBMC and now MinePeon. MP is the best use so far. I got this from Newegg. I chose it based on price and a 2A power supply. It seems to be working ok so far: http://www.newegg.com/Product/Product.aspx?Item=N82E16817182176I'm using 4 Block Eruptors. The way the ports are situated on the 7 port hub, you can only put 2 in the front (where there are actually 3 ports) and probably none in the back (where there is 1), but you can put 3 on top. I'm only planning on using the 4, so it works fine for me. However, I am finding I'm unable to keep Minepeon running for more than 24 hours at a time. I'm not sure where the problem is yet. I'm going to have to hook up a keyboard so I can see what's going on.
|
|
|
|
batt01
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 25, 2013, 06:28:23 PM |
|
Make sure your power supply to the RPi is sufficient . When I first got mine I used an old cell phone charger and I had lost of strange issues. My best guess is tis power relate, either the hub itelf or the hub. Below is a link with verfied working hubs. The cheap ones might not have the juice to power many at the same time. http://elinux.org/RPi_VerifiedPeripherals#Powered_USB_Hubs
|
|
|
|
hotwired007
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 25, 2013, 08:29:01 PM |
|
OK, time to post a picture of my rig. It is the first time I have a dedicated rig running 24/7. The mainboard is a Zotac D2550-ITX WiFi sporting an mSATA SSD. The rest you can probably see: that's an Anker 10-port powered USB-hub, with an Arctic Cooling USB fan, and of course 9 USB Block Eruptors. The whole package provides 3 GH/s and it runs on wifi at the moment. My future plan is to build this into an outdoors-safe box and place it in my garden. I will also connect 4 BFL units (if and when they arrive). http://24.media.tumblr.com/87c1e422731525a486ceea29d08e99b9/tumblr_mqhtvy6H471qa6usno1_1280.jpgYou could easily bung a PCI-e card on that an mine a few scrypt coins at the same time ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
This account was hacked & possibly sold during the period of August 1st and October 24th 2017. Anything done or said in this period wasnt me. Many thanks to Cyrus for his help restoring access to my account.
|
|
|
stellan0r
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 25, 2013, 09:25:13 PM |
|
However, I am finding I'm unable to keep Minepeon running for more than 24 hours at a time. I'm not sure where the problem is yet. I'm going to have to hook up a keyboard so I can see what's going on.
Have you checked if you donate Mining Time in Minepeon? If so, Minepeon will never run more than 24 hours until rebooting the Miner to switch to the donation pool and then back to your pool
|
Allgemeine Gesundheitsberatung gegen Bitcoin-Zahlung. Bei Fragen einfach eine PM schicken! If you want to send a thank you: BTC "1PZJvKvarRviQRQWejpvXW2j4e1xbT8MZb"
|
|
|
stellan0r
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 25, 2013, 09:31:32 PM |
|
You are welcome. What USB hub are you using, and how many erupters. I really want something like the Anker, top mounted plugs and 10 ports that works with the Pi?
There actually is a great 49 Port USB 2.0 hub that works with the RPi, but unfortunatly that hub from Cambrionix costs a small fortune. Be aware of always leaving like 0.5A headroom on a hub, so if you get a 5 Port hub with a 2.5A power supply only plug in 4 Block Erupter. On a 7 Port with a 3A power supply max 5 Sticks, with a 4A power supply you can use all 7 ports. This will help with stability and longer life of the hub.
|
Allgemeine Gesundheitsberatung gegen Bitcoin-Zahlung. Bei Fragen einfach eine PM schicken! If you want to send a thank you: BTC "1PZJvKvarRviQRQWejpvXW2j4e1xbT8MZb"
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 25, 2013, 10:03:44 PM |
|
How many mining sticks does the RBi's computing power handle before it starts to effect mining?
|
|
|
|
stellan0r
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 25, 2013, 10:21:17 PM |
|
Rumors say about 50 USB Sticks. But as RPi's are cheap, getting a second one should not be a problem.
|
Allgemeine Gesundheitsberatung gegen Bitcoin-Zahlung. Bei Fragen einfach eine PM schicken! If you want to send a thank you: BTC "1PZJvKvarRviQRQWejpvXW2j4e1xbT8MZb"
|
|
|
batt01
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 25, 2013, 11:37:41 PM |
|
You are welcome. What USB hub are you using, and how many erupters. I really want something like the Anker, top mounted plugs and 10 ports that works with the Pi?
There actually is a great 49 Port USB 2.0 hub that works with the RPi, but unfortunatly that hub from Cambrionix costs a small fortune. Be aware of always leaving like 0.5A headroom on a hub, so if you get a 5 Port hub with a 2.5A power supply only plug in 4 Block Erupter. On a 7 Port with a 3A power supply max 5 Sticks, with a 4A power supply you can use all 7 ports. This will help with stability and longer life of the hub. I am thinking that the D-Link DUBH-7 could handle at 6 or seven. 5 of the port are 0.5amp and two are considered charging ports and are 1.2 amps. So six or seven block erupter would not overload it. I only have one block erupter now. I have five more on the way. So we will see. Specs below. Supplied Charging Current Standard Mode: All seven USB ports- 0.5 A per port 2 Fast-Charge Mode: 5 standard USB ports- 0.5 A per port 2 2 USB fast charging ports - 1.2 A per port 2
|
|
|
|
Beastlymac
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2013, 02:34:14 AM |
|
You are welcome. What USB hub are you using, and how many erupters. I really want something like the Anker, top mounted plugs and 10 ports that works with the Pi?
There actually is a great 49 Port USB 2.0 hub that works with the RPi, but unfortunatly that hub from Cambrionix costs a small fortune. Be aware of always leaving like 0.5A headroom on a hub, so if you get a 5 Port hub with a 2.5A power supply only plug in 4 Block Erupter. On a 7 Port with a 3A power supply max 5 Sticks, with a 4A power supply you can use all 7 ports. This will help with stability and longer life of the hub. I am thinking that the D-Link DUBH-7 could handle at 6 or seven. 5 of the port are 0.5amp and two are considered charging ports and are 1.2 amps. So six or seven block erupter would not overload it. I only have one block erupter now. I have five more on the way. So we will see. Specs below. Supplied Charging Current Standard Mode: All seven USB ports- 0.5 A per port 2 Fast-Charge Mode: 5 standard USB ports- 0.5 A per port 2 2 USB fast charging ports - 1.2 A per port 2 Yes BUT the power supply only supply's 5v 3A so the maximum be it would support is 6.
|
Message me if you have any problems
|
|
|
stellan0r
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2013, 06:37:44 AM |
|
You are welcome. What USB hub are you using, and how many erupters. I really want something like the Anker, top mounted plugs and 10 ports that works with the Pi?
There actually is a great 49 Port USB 2.0 hub that works with the RPi, but unfortunatly that hub from Cambrionix costs a small fortune. Be aware of always leaving like 0.5A headroom on a hub, so if you get a 5 Port hub with a 2.5A power supply only plug in 4 Block Erupter. On a 7 Port with a 3A power supply max 5 Sticks, with a 4A power supply you can use all 7 ports. This will help with stability and longer life of the hub. I am thinking that the D-Link DUBH-7 could handle at 6 or seven. 5 of the port are 0.5amp and two are considered charging ports and are 1.2 amps. So six or seven block erupter would not overload it. I only have one block erupter now. I have five more on the way. So we will see. Specs below. Supplied Charging Current Standard Mode: All seven USB ports- 0.5 A per port 2 Fast-Charge Mode: 5 standard USB ports- 0.5 A per port 2 2 USB fast charging ports - 1.2 A per port 2 Yes BUT the power supply only supply's 5v 3A so the maximum be it would support is 6. AAAAND the two 1.2A ports only give 1.2A when the Hub is NOT connected to a running computer (for charging of phones etc)!! Did you bother to read the manual?! I have two of those D-Link Hubs and I would not put more than 5 Sticks in each of it.
|
Allgemeine Gesundheitsberatung gegen Bitcoin-Zahlung. Bei Fragen einfach eine PM schicken! If you want to send a thank you: BTC "1PZJvKvarRviQRQWejpvXW2j4e1xbT8MZb"
|
|
|
batt01
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2013, 07:15:58 AM |
|
AAAAND the two 1.2A ports only give 1.2A when the Hub is NOT connected to a running computer (for charging of phones etc)!! Did you bother to read the manual?! I have two of those D-Link Hubs and I would not put more than 5 Sticks in each of it.
No like most old computer geeks, I only RTFM as a last resort. ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) Thanks for your insight. I just got tracking info for my 5 gizmos.
|
|
|
|
|