KanoPool since 2014 🐈 - PPLNS and Solo 0.5% fee - Worldwide - 2436 blocks

[madmartyk]

They don't write them up as Heat Sinks?

[1715274076]

1715274076

[firetreeactual]

Dunno why youz guyz got stuck in customs...mine sailed through Oakland day before yesterday and is on the truck this morning.

Guess I was just lucky. The only time I've had a customs issue was actually sending something to Labrador...took an extra two days at CAN customs for whatever reason.

Hope to be at around 24TH by this evening.

Mine on, bunkies...lock'n'load, rock'n'roll...  

[rockmoney]

Come on blocks!  I got the dreaded "Clearance Delay" notice on my A721 shipment this morning.  It was scheduled to be delivered today but it is Oakland, California on hold.  

My  2 still seem to be no where. Last info was on Mon and they were in Hong Kong.

With a 2043 usd order I fear big time taxes on this gear.

That sucks Phil! Hope you get your shipment soon and can let us know how they perform! 

[firetreeactual]

Hang in there, Phil. It's gonna be OK. 

Pleased to say I'm back to running a full node here. Oceanic has actually been decent. No data cap.

Mine on... 

[wmabern]

All of my miners are back up on line again and hashing on Kano.

Let's crack this mother and get some blocks flowing for December!!!

Come on BLOCKSSSSSSSSSSSSSSSSSS!!

[clgrissom3]

Dunno why youz guyz got stuck in customs...mine sailed through Oakland day before yesterday and is on the truck this morning.

Guess I was just lucky. The only time I've had a customs issue was actually sending something to Labrador...took an extra two days at CAN customs for whatever reason.

Hope to be at around 24TH by this evening.

Mine on, bunkies...lock'n'load, rock'n'roll...  

Turns out mine was not stuck; got a call from a really nice FedEx person, answered a couple of questions, and she said the package
should be delivered by tomorrow.  <relief!>

[Biodom]

hanging on. it shall pass.

[firetreeactual]

Turns out mine was not stuck; got a call from a really nice FedEx person, answered a couple of questions, and she said the package
should be delivered by tomorrow.  <relief!>

That's good...I'm just sitting here waiting for FedEx, making up new 3-pair PSU pigtails so I can get it running full tilt.  

[sorry2xs]

Turns out mine was not stuck; got a call from a really nice FedEx person, answered a couple of questions, and she said the package
should be delivered by tomorrow.  <relief!>

That's good...I'm just sitting here waiting for FedEx, making up new 3-pair PSU pigtails so I can get it running full tilt. 

just curious is the 30a @ 240 or 120 volt

[kano]

OK so I'll go for the anime sacrifice early this time - before it turns into a bright red 2 day long block

After Ripple/Kano and Top Speed defeated Calamity Mary, Top Speed was killed in a surprise attack from behind
(they transform back when they die - that's Ripple/Kano on the right again)
Yes this anime is no holds barred, Top Speed was 3 months preg.
May Top Speed and her baby be appropriate sacrifices to the block gods

[wmabern]

 

OK so I'll go for the anime sacrifice early this time - before it turns into a bright red 2 day long block

After Ripple/Kano and Top Speed defeated Calamity Mary, Top Speed was killed in a surprise attack from behind
(they transform back when they die - that's Ripple/Kano on the right again)
Yes this anime is no holds barred, Top Speed was 3 months preg.
May Top Speed and her baby be appropriate sacrifices to the block gods

Love the anime! Anything that helps the blocks crack is A-OK with me! 

Come on BLOCKSSSSSSSSSSSSSSSSSSSSSSSSSSSSS!!!!       


We NEED GREEN!!!

[firetreeactual]

Turns out mine was not stuck; got a call from a really nice FedEx person, answered a couple of questions, and she said the package
should be delivered by tomorrow.  <relief!>

That's good...I'm just sitting here waiting for FedEx, making up new 3-pair PSU pigtails so I can get it running full tilt. 

just curious is the 30a @ 240 or 120 volt

Alas...120. This is the US...and I don't have 240 in my unit. They're planning on upgrading the feeds to 100A next summer. Whoopee.

[roppix]

Come on blocks!  I got the dreaded "Clearance Delay" notice on my A721 shipment this morning.  It was scheduled to be delivered today but it is Oakland, California on hold.  

https://i.imgur.com/r4HHfa9.jpg

My  2 still seem to be no where. Last info was on Mon and they were in Hong Kong.

With a 2043 usd order I fear big time taxes on this gear.

Hello Philip I have few questions. Im planning to buy few avalon721 becuase I got an avalon6... Its awsome... 1 year running non stop, no issues like crappy S7 or S9

• How many days takes from China to US?
• Can you buy any amount?
• They only accept bank transfers? or I can use BTC to pay?
• What PSU are you planning to use?

Thanks in advance.

[sorry2xs]

Turns out mine was not stuck; got a call from a really nice FedEx person, answered a couple of questions, and she said the package
should be delivered by tomorrow.  <relief!>

That's good...I'm just sitting here waiting for FedEx, making up new 3-pair PSU pigtails so I can get it running full tilt. 

just curious is the 30a @ 240 or 120 volt

Alas...120. This is the US...and I don't have 240 in my unit. They're planning on upgrading the feeds to 100A next summer. Whoopee.

well that is not a lot of power, how is 721 doing

[philipma1957]

Come on blocks!  I got the dreaded "Clearance Delay" notice on my A721 shipment this morning.  It was scheduled to be delivered today but it is Oakland, California on hold.  

My  2 still seem to be no where. Last info was on Mon and they were in Hong Kong.

With a 2043 usd order I fear big time taxes on this gear.

Hello Philip I have few questions. Im planning to buy few avalon721 becuase I got an avalon6... Its awsome... 1 year running non stop, no issues like crappy S7 or S9

• How many days takes from China to US?
• Can you buy any amount?
• They only accept bank transfers? or I can use BTC to pay?
• What PSU are you planning to use?

Thanks in advance.

pm sent

[firetreeactual]

I used a RPi3B of my own, with a reflashed micro-SD with the 721 firmware (Nov 21), and find that my A7 won't talk to the network for reasons I simply can't figure out. I can "see" it on the router (DHCP) but it isn't actually connected (?!). I therefore can't get to the GUI to set it up to mine, etc. Anyone else had this happen yet?

I opened a ticket and expect they'll get back to me presently, so please ignore if appropriate. Just frustrated. It's the unlabeled one with the MAC ending in E6.

[sorry2xs]

I used a RPi3B of my own, with a reflashed micro-SD with the 721 firmware (Nov 21), and find that my A7 won't talk to the network for reasons I simply can't figure out. I can "see" it on the router (DHCP) but it isn't actually connected (?!). I therefore can't get to the GUI to set it up to mine, etc. Anyone else had this happen yet?

I opened a ticket and expect they'll get back to me presently, so please ignore if appropriate. Just frustrated. It's the unlabeled one with the MAC ending in E6.

the a7 is on a static  ip 192.168.0.xxx

[firetreeactual]

What a dumbass...sorta kinda...

Time Warner Oceanic gave me a new modem a couple of days ago. Turns out it's set to 192.168.0.xxx. My router is 192.168.1.xxx.

So...I finally figure that out and just plug the damn RPi into one of the modem's RJ45s, go direct to the 721, and set it to my home network's IP plan.

Now...if I can get the damn Internet to quit dropping out every ten minutes...

Wotta day. Macheen workee, though...same noise level as the A6 under it.

For the PSU question...I'm using the configuration I used for the S7s. They're (120/240) server bricks, rackmount, 1KW each. I've got gridseed adapters with four each, six-pin PCIe leads on each brick, and then that brick feeds one side of the A7. This way no brick is having to push more than 60%, and with these higher quality plugs I'm thinking it would be hard to fry an A7 if you're using the full config. IMHO I would NOT use anything but full, 3-pair plugs...and all eight of them.

So...up and running, I'm now...

[firetreeactual]

Pool page logins disabled...is someone not playing nice again?

[sorry2xs]

Pool page logins disabled...is someone not playing nice again?

must be for new logins, I stay logged always
Edit: I have a miner down now for 22 hours and Tuesday for 26 hours