|
Hi Patrike,
the blockchain driver will be unrecognized again.
|
|
|
|
Author disappeared...
LOL last time online was today. How you came to the conclusion that the author is disappeared? |
|
|
|
Is it possible to set up the miner (.bat) file to mine on more then one address from a single .bat file?
Let's say i have 1 rig with 7 GPU-s and i want 4 of them to mine on one address and 3 on another?
@echo off
start "Wallet One" "C:\Claymore Wallet One\EthDcrMiner64.exe"
start "Wallet Two" "C:\Claymore Wallet Two\EthDcrMiner64.exe" -di 0123 and -mport 0 @ Claymore Wallet One @ config.txt -di 456 and -mport 0 @ Claymore Wallet Two @ config.txt Why -mport 0? you must use two different ports for monitoring. For example 3333 and 3334. 0 makes no sense to me. And why 2 folders? Make two .bat files and start it seperate or start this two .bat files with a extra start.bat. |
|
|
|
Is it possible to set up the miner (.bat) file to mine on more then one address from a single .bat file?
Let's say i have 1 rig with 7 GPU-s and i want 4 of them to mine on one address and 3 on another?
create 2 bat files and start 2 instances. |
|
|
|
Hey, anyone knows the best PSU to purchase for connecting 6 GPUs?
Just that I don't want to be short of wires as VII uses 2x 8-pin cables.
Thanks
You cant connect 6 GPU's on 1 PSU. There is no PSU on the market with 12 PCIe connectors. EVGA has 9 connectors. You can run 4 GPU's and if you use a cable-mod (CPU to PCIe) you can run 5 GPU's. (SuperFlower is the same as EVGA. If you dont need the 2000W, better go with EVGA!) Seasonic Prime Gold 1300W ATX 2.4 (SSR-1300GD) has 10 connectors. With good undervolt you can run 5 Radeons. But with every energy-spike, every GPU-reset, everything which dont stay optimized will shut down that PSU. (Corsair and CoolerMaster also have PSU's with 10 connectors. But in terms of quality and warranty they both stays way behind EVGA. Even Seasonic is not the best pick.) So better split your load to 2 PSU's with a bit of room. If you need for example 900W for 3 GPU's, buy a 1200W or 1300W PSU. The 1300W Gold EVGA PSU's are mostly cheaper than the 1200W xxx PSU's, so the 1300W is the better choice. No need for Platinum and co, if they are only for mining. Life saver tip: NEVER EVER use cheap 6-pin to 8-pin PCIe adapters to connect just 1 double cable from your PSU to your GPU!!! They will get very hot and if you are unlucky, you can burn down your home! Another tip: Don't use cheap chinese server/mining PSU's. Protect your investment with quality! LOL, there are so many PSU´s with 12 or more PCIe connectors XD |
|
|
|
Hello, I have 2 mining rigs that are exactly the same, one of them is working perfectly fine but the other one just randomly freezes every 10-12 hours and stops the mining. I don't know what can be the problem. If you guys have any solutions please help me out!
My Specs:
GTX 1070 (12)
Asrock 110 Pro BTC+
8gb ram
2 1300W PSU
Which Algo? Coin? Miner? Please Upload the log file from the miner? What OS (Windows, HiveOS, EThos) Please give us a bit little more information. |
|
|
|
Hi.
I'm using Phoenix on top of HiveOS.
Currently I'm running 9 P106 cards.
Phoenix memory usage in this setup is ~1.3GB.
Is there a way to reduce Phoenix memory usage?
I'm about to extend my rig by 4 cards and most probably my 4GB of ram will be exhausted.
LOL? For 9 Cards you need 1.3 GB ram? And you think 4 new cards use more than 2,7gb ram?  4GB Ram is enough for up to 16 Cards |
|
|
|
MSI After Burner
Radeon Crimson
RX 470/570 with Themartake 650 Smart Bronce
RX 470/580 with Sentey Stell Nitro Power 550 White
(are 2 PCS)
Hello, i have 2 RX 470 and 2 RX 570. and i want OC this cards (the amount in USD is awesome superior, about 30% per card). But... the wires of my powersuply come hotter, and the temperature of cards is very higher.
For example:
Without OC:
1700 memory clock and 0.6 USD, Temp: 69%
With OC:
2200 Memory clock and 1 USD, Temp 89%
The real problem isnt the temp, becouse i can put a external fan. But the energy consumition will be higher
Also, i dont want kill my powersuply.
Finally, i want know a correct and good Overclocking config for this, for:
High Money, High temperature, Normal energy consumition in month
Currently, i am thus:
Very high diference to earned money, but extreme consumition energy and xtreme high temperature and maybe FATAL use of my cards.
So, what can i do for this? I am sure of touch only the memory clock
For which algo? Which driver version your are using? Temp is no problem if you lower the voltage, then power consumption is no problem too. They are so many descriptions put there, please use search or google. |
|
|
|
Is it true that the latest Windows 10 update will cause problems to mine claymore, so it won't work.
I didn't immediately activate my PC for updates, so I didn't know it.
If it's a problem, I won't update, until I find a solution to deal with
It seems to me that you can not turn off the update Windows. This is a threat to the security of the computer and the data stored on it. In particular, cryptocurrency. Wrong, it is possible to turn off the windows updates, without third party tool or deleting a service lol. My rigs make no updates for over a year.  |
|
|
|
|
For nvidia Phönixminer is the best. Highest hashrate, stable and lower devfee.
|
|
|
|
Anyone managed to beat this with straps built in latest Claymore 14 miner?
I have 2 Cards with 16,7 - 16,9 Mh  I will try the new claymore version this weekend. |
|
|
|
|
i lost my staking coins on 2 wallets :frowning: staked for the last 5 month, and today it says 0 coins in staking contract and nothing to claim. Can someone check this?
0x36b2a35689e61be1a87f1a70fb56909aece9d3d2 it must be around 70000 clo
0xfd9d33c95ff73f0d59bc5a2aa1c38ba2e04184e3 it must be around 120000 - 140000 clo
|
|
|
|
Has anyone ever found an answer to this? Support said to change stratums which I had already did. They could not find a solution other than that, i can't be the only one having this issue.
lol yes eth hardfork at the end of february slow down the antminer e3´s |
|
|
|
You manage 1500 GPU Rigs and you must weekly reboot windows? you are a really bad miner. My windows10 runs faster then linux (ethos), more stable than linux, i need no reboot for over 2 month (no miner restarts or what ever). Do the right job, then windows works fantastic. i work with windows 1703, 1803, 1809 and alle works perfect. my windows make no updates, you must find the right solution Windows Hashrate 185mh with 6x RX 570, no hardware errors Ethos Hashrate 178mh with 6x RX 570, i must clock down the cards. with the same speed as in windows, the miner stops working after several hours. This is my opinion and my experience, i am not a linux hater, but i can´t read this shit about windows, from people who do not work properly with windows. I love all you keyboard warriors that talk shit with no practical experience. Im so bad I run one of the largest crypto fams in North America! Good job with your couple rigs running Windows. Im sorry you dont know enough about linux to tweak and configure it for performance, but you really shouldnt claim something is better just because you dont understand how to use the other product. Show me your Windows miners that can do this: Last login: Fri Oct 19 12:16:56 2018 from 10.30.0.20 [Agent: GMiner11154 (Running) Total HR: [176.10Mh/s] Miners running [1] GPUs [AAAAAA]] [06:26 PM][ Uptime: 245d 17:22][root@GMiner11245(10.10.111.54)] LOL yes and you talk shit with no practical experience XD You need 2 bitcointalk accounts? Lost your password and can´t recover? 245d runtime, my rigs can do that easily, but i update my miners with every new release. so normal runtime is 1 - 2 month easily. The fix is really easy. Run Linux. Windows is crap for mining and it wont get any better.
You will no longer have:
Driver problems
Reliability problems
Windows update breaking things
Random blue screens
Licensing issues
Example of one of my linux miners:
[/root]:# uptime
14:22:55 up 152 days, 20:40, 2 users, load average: 0.78, 0.80, 1.06
[Agent: 11152 (Running) Total HR: [2.71Kh/s] Miners running [1] GPUs [AAAAAA]]
This list is completely bullshit, but yes you are the man dude lol And why the hell you know how many rigs i have? I have never write it, in this thread. Oh you didn´t know that? So why you believe i have only a couple? You say you manage 1500 rigs, but your answers let me think a little bit different XD |
|
|
|
Once you overclock your Gpu-s I am sure you will see mich better performance from the ASUS brand.
It may also be because different memory vendor maybe PowerColor have better memory like Samsung while your Asus may have elpida or hynix which can be a limiting factor.
Under normal circumstances and with same memory Asus should offer betterperformance.
Thanks for your input. I already got this feeling too just from the overall impression. Also the Powercolor claims to have the same temp with a lot lower fan speed. I don't really trust this Powercolor that much  SO does that mean the memory vendor of the card can affect the mining performance ? Just judged by stats the ASUS memory should be better. Please don´t ask such old questions. Use google and search for memory timings straps for mining. This subject was discussed enough in the last 3 years. |
|
|
|
You dont need another 100's of clocking profiles, you just need 1 profile with your fixed 80% speed. Nothing else. Apply it with a rule to your miners, nothing else will be changed.
I think you're wrong in what you say. Although I create another profile, if I leave the other values at 0, in the end it will be 100PL 0 core 0 memory and fan speed. When you apply an oc profile, the entire complete profile is applied, not just one parameter. If I'm wrong, leave me here a screenshot of how I should leave the OC profile, but before you try it, it really works. lol you are wrong. You need only 1 Profile, with only fan 80%, unmark the other properties. It worked perfect, we have 200 GPU, every card with a single profile. 20 People work with you and no one get this to work? Look at GoRdiE uploaded pic, nothing more to say. https://i.imgur.com/JdzQr6P.jpg |
|
|
|
|
You need only so much oc profiles, how much fan speeds you want. only save oc profile with only fanspeed in it. You can use this profile for every miner you want. So you need only 2 or 3 rules in my opinion for all miners.
|
|
|
|
|
Use rules, fixed fans and 2 or more profiles. If the temperature reach 70°C for example make a rule to change to another profile with faster fixed fans. I think it is the easiest way. And in my opinion, if you mining, never use automatic fan control.
|
|
|
|
These guys are a joke. For a group that pretends to want to bring transparency, their pricing structure is beyond convoluted and confusing. They had a pre-sale, now another presale? Plus a coupon for another batch? Anyone that sends a dime to these guys get what they deserve.
You are a joke. These guys do there job very well. Bitmain does the same, if you buy a miner, most time you get a coupon for the next batch or miner. So were is the problem? Sorry your post is stupid. |
|
|
|
seems like tokens landed to my wallet  yes i have also get my Zil in my first wallet, now waiting for the second wallet payout. |
|
|
|
|
Show Posts
