Hi Patrike.
Ever since I installed the last update AM notifies me that all of my A9 Zmaster's are running at 9999 degrees but the factory GUI is correct. Can I roll back the update somehow?
Hello. Can you please select the miner and send me the API Report for it (via the toolbar Tools -> API Report)? Which version did you upgrade from? |
|
|
|
One other thing - I see a lot of other posts about coin values - I don't know if its been brought up but with coincalculators, recently its exchange prices aren't being updated that often - or at least for lower volume coins - but its "average last price" is. This can cause the current profit estimates to be way off. It would be great if there would be a way to use that value instead of the exchange ones for more accurate mining.
Hal
Awesome Miner uses "Average Last Price" by default for CoinCalculators. When "Exchange Filter mode" is set to Disabled in the Options dialog, Statistics Provider section, this average price is used. If you instead enable the exchange filter, the exchange rate for a specific exchange will be displayed. To avoid low volume exchanges to be considered, you can configure a minimum exchange volume. PAtrike I have been talking to KARL from CTM in his discord, I am very active speaking with the developers. I have convinced you that shortly in your API, include the purchase and sale price, as CC. I hope you can integrate it in AM. Many times CTM gives the value of the last sale, something that is not desirable, and as this has already been done for CC, it will be easy to implement it in CTM. Please talk to CTM's KArl for these new data in the CTM api. IF it's not done yet, you have a few days left. Really CC updates prices very little, even with large volume coins, does not do the price work well. CC is good in the data of the currencies, but not in the prices. And yet CTM is very good at giving updated prices, but now when we can choose the purchase price as I like it. It gives the impression that CC is more and more abanadonado. I suggest everyone to put cointomine as the first provider. I can not be seeing the same price of a coin, in the case of GRIN, kept the same price for 4 days in CC, something unaffordable. Thanks for pushing for the highest bid / lowest ask feature. It's quite easy for me to add a property for this in Awesome Miner once available via the CTM API. On its website it already shows the purchase and sale price, and also in several times, current, 1 hour, 3 hours etc ... I do not know if it will still be in the api, so I indicated that contact KArl or see your api directly. It would be nice to be able to choose the current or 3 hours and sale or purchase price as we do in CC. In the Options dialog, Statistics Provider section, you have the setting "CoinToMine Exchange Rate" that you can set to Default (last price) / Highest Bid / Lowest Ask. The limitation right now is that Awesome Miner only can read the Current or 24h avg values here. The 1 hour / 3 hour values are not yet part of the CTM API. |
|
|
|
My managed profit miners are going "offline" now and then, this seem to happen when pools fail (seen it on nicehash and zpool so far, with bminer, gminer and z-enemy). Even that the miner is flagged as offline, it is still connected to awesome miner manager and I can just start it again. Is there a way to force the miner to not stop/go to the next pool/algo, or any ideas on how should I troubleshoot this?
On options->Profit switching I have this:
Ignore pools with no accepted shares in minutes: checked 6
Ignore minutes: 50
Ignore pools after too many failed miner restart attemps: checked
Thanks
Is the scenario that once you run into this problem, even after > 6 minutes, Awesome Miner has still not marked the pool as failed and moved on to the next pool? It just keeps running the same mining software that is unable to do its work - while it display "Interface offline"? |
|
|
|
|
Awesome Miner version 6.2.2
GPU mining
- Benchmark feature will save the hashrates of all benchmarked mining software, not only for the best performing software
- Improved support for reading the current fan speed on nVidia RTX 2000 GPUs
- The default Profit Profile settings for nVidia and AMD will use the new Gminer setting to only enable either nVidia or AMD mining
- Added Cryptonight GPU and Cuckaroo29s algorithms
Mining software
- Gminer 1.34
- NBMiner 20.0
- WildRig Multi Miner 0.15.3.8
- TT-Miner 2.1.12, including Nicehash MTP support
- SrbMiner 1.7.9
- Bminer 15.0.2
Corrections
- Ensure unique API identifiers for miners
- Minor correction to the communication interface for Remote Agent on Linux
|
|
|
|
One other thing - I see a lot of other posts about coin values - I don't know if its been brought up but with coincalculators, recently its exchange prices aren't being updated that often - or at least for lower volume coins - but its "average last price" is. This can cause the current profit estimates to be way off. It would be great if there would be a way to use that value instead of the exchange ones for more accurate mining.
Hal
Awesome Miner uses "Average Last Price" by default for CoinCalculators. When "Exchange Filter mode" is set to Disabled in the Options dialog, Statistics Provider section, this average price is used. If you instead enable the exchange filter, the exchange rate for a specific exchange will be displayed. To avoid low volume exchanges to be considered, you can configure a minimum exchange volume. PAtrike I have been talking to KARL from CTM in his discord, I am very active speaking with the developers. I have convinced you that shortly in your API, include the purchase and sale price, as CC. I hope you can integrate it in AM. Many times CTM gives the value of the last sale, something that is not desirable, and as this has already been done for CC, it will be easy to implement it in CTM. Please talk to CTM's KArl for these new data in the CTM api. IF it's not done yet, you have a few days left. Really CC updates prices very little, even with large volume coins, does not do the price work well. CC is good in the data of the currencies, but not in the prices. And yet CTM is very good at giving updated prices, but now when we can choose the purchase price as I like it. It gives the impression that CC is more and more abanadonado. I suggest everyone to put cointomine as the first provider. I can not be seeing the same price of a coin, in the case of GRIN, kept the same price for 4 days in CC, something unaffordable. Thanks for pushing for the highest bid / lowest ask feature. It's quite easy for me to add a property for this in Awesome Miner once available via the CTM API. |
|
|
|
working fine 2.1.11 final build as well, i added it in awesome miner
I was also just testing it out and it works fine from what I can see. It will be soon be officially included as well. Keep up the good work! |
|
|
|
Hello Any plans to add Zilminer for dual mining?  I've just had a quick look at that one so far. It states that it's based on Ethminer so it might be possible to add already today if you specify the mining software as Ethminer. I do see that Zilminer also have some unique concepts for when it should be started and stopped. |
|
|
|
One other thing - I see a lot of other posts about coin values - I don't know if its been brought up but with coincalculators, recently its exchange prices aren't being updated that often - or at least for lower volume coins - but its "average last price" is. This can cause the current profit estimates to be way off. It would be great if there would be a way to use that value instead of the exchange ones for more accurate mining.
Hal
Awesome Miner uses "Average Last Price" by default for CoinCalculators. When "Exchange Filter mode" is set to Disabled in the Options dialog, Statistics Provider section, this average price is used. If you instead enable the exchange filter, the exchange rate for a specific exchange will be displayed. To avoid low volume exchanges to be considered, you can configure a minimum exchange volume. |
|
|
|
Hello Patrike. there something that I wanted to comment to see if somehow you could do
Surely you know, I know you know the AM CU of shootaa. He has left it abandoned. It only has small fixes to do, the problem that as the Explorer have been updated, when reading the HTML to extract the data, I mean to parse, it does not get the nethash, but the difficulty.
I do not know to what extent you could rescue, that you talk to Shootaa to see if he gives it up, fix it and offer it as a complement of Awesome miner. The truth is that I miss it and it's a pity to lose that job already done.
I will not be able to take on the AM CU work. If there is a significant demand for having a few similar features in Awesome Miner, that could be a way forward. As with all other feature requests, it needs to be prioritized among many other requests as well. I hope you understand this point. Thanks! |
|
|
|
Can you please add a Rules- Trigger for Miner power-watts.
Then I can take Action like "Apply GPU clocking profile" to reduce power limit.
Thanks.
Thanks for the suggestion - it's an interesting idea. It's noted and will be considered. |
|
|
|
Gminer 1.33 for Equihash 150.5 (BEAM) no longer works for me on windows 64bit.
Prior to the update it worked.
Please start the miner with the Diagnostics button in the toolbar to get more details why it isn't starting correctly. Thanks! Initialize diagnostics (10)
Starting Diagnostics. Awesome Miner Remote Agent version: 6.2.1
OS: Microsoft Windows 10 Pro 64-bit
nVidia driver version: 416.81
Microsoft VC++ 2013 runtime installed: Yes
Microsoft VC++ 2015 runtime installed: Yes
Starting Mining Software
Setting up Miner Engine. Instance: 1
Engine Type: GMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable:
Properties: (WindowMode: ConsoleFormat, EngineType: GMiner, IsProfitMiner: True)
====================================================================================================
C:\Users\Windows\AppData\Roaming\AwesomeMinerService\gminer_1_33_minimal_windows64_1\miner.exe --ssl 1 -a 150_5 -s beam-us.leafpool.com -n 3333 -u 162b769afab3cb06d62695b83d9f7b41526032d784cbf729eed66461e984eb7ad28.mitz3 -p x --pers auto -w 0 --api 4028
====================================================================================================
Mining Engine Process started, PID: 7060
====================================================================================================
Unexpected exit of mining software. Possible cause: Incorrect configuration or crashing software
Diagnostics completed
Maybe the update didn't run properly. Can I just reinstall awesome miner?
Thanks for sharing the details. I tried your exact command line and it starts Gminer perfectly fine, so the command line product by Awesome Miner should be fine. I don't think re-installing Awesome Miner will resolve the issue. It's some combination of GPU's, GPU drivers, Gminer and algorithm that doesn't work 100% here. Could it be the latest Gminer version 1.33 that cause the problems while 1.31 works better? Please try the following in Awesome Miner: 1) Open the Options dialog and go to the Managed Software section 2) Edit the Gminer entry 3) Change the Download URL to point to version 1.31: https://s3.amazonaws.com/awesomeminer-download/gminer_1_31_minimal_windows64.zip |
|
|
|
Gminer 1.33 for Equihash 150.5 (BEAM) no longer works for me on windows 64bit.
Prior to the update it worked.
Please start the miner with the Diagnostics button in the toolbar to get more details why it isn't starting correctly. Thanks! |
|
|
|
I can also verify that MTP mining on NiceHash with CryptoDredge or TT-Miner results in only rejected shares. Thanks for trying to update it though. I would suggest using the special version of ccminer that is being run with NiceHash Miner Legacy v1.9.0.15 which says this when you first run it:
*** ccminer 1.1.12-djm34 for nVidia GPUs by djm34 ***
Built with VC++ 2015 and nVidia CUDA SDK 10.0
Originally based on Christian Buchner and Christian H. project based on tpruvot 1.8.4 release
Include algos from alexis78, djm34, sp, tsiv and klausT.
*** News (07/06/2018): MTP algo for ZCoin
I've also verified with this Ccminer MTP and it works fine with Nicehash: https://github.com/zcoinofficial/ccminerWe will most likely see improved Nicehash support for CryptoDredge and TT-Miner soon, based on the discussions in those forum threads. |
|
|
|
GMiner 1.33 supports Beam mining on AMD GPUs, now it causes issues on mixed AMD/NVIDIA rigs because it always tries to use all AMD cards too.
I noticed the very latest version of GMiner (v1.34) now includes a command line flag where it's possible to disable nVidia or AMD GPU's. On Gminer 1.34 you will be able to use: 1) To only use AMD and disable nVidia CUDA: --cuda 0 2) To only use nVidi and disable AMD OpenCL: --opencl 0 I will of course include Gminer 1.34 in the next update. I will also make sure the default profit profiles includes these command line arguments for new installations - however, Awesome Miner will not go in and automatically modify any GMiner command line on existing installations. |
|
|
|
Hi,
Can you add Algorithm "Cryptonight GPU" ?
Thanks,
Vlad
Yes, this one will be added in the next release. |
|
|
|
|
Awesome Miner version 6.2.1
GPU mining
- Native Overclocking: nVidia target temperature enforced in more scenarios
- Added additional algorithms
Integration
- Nicehash MTP pool included
Configuration
- The setting for automatic column size is now applied for the Miners and Balance tabs as well
Mining software
- Gminer 1.33
- XMRig 2.12
- SrbMiner 1.7.8
- Grin Pro Miner 1.2
- Ethminer 0.17.1 rc0
Corrections
- Correction to Ubqhash calculations for coins per day
Note: BMiner 15.0 is not yet included because it was a number of users having issues with that release.
|
|
|
|
Can you please check if the behavior goes away if you take one of the Antminers and change to another pool? Just to confirm if it's the same problem or something else. Thanks!
I forgot that not all miners are on Kano - I do have one miner that is on Slushpool, it has also had the same issue, just less frequently as it is only one miner. Patrike - I wanted to let you know that I have not had this problem at all since your last update to the AM software. I made no changes to any settings but it has not occurred since the last update. Thanks for the update on this. There are however no changes made to Awesome Miner for this. There can still be an issue that the miner, at random times, start to behave like this. What you could try next time it happens is to use a tool like Microsoft PsPing, where you can test the connection to the monitoring interface (API) port 4028 on the Antminer. It's a good way of testing an Antminer. |
|
|
|
Native overclock is the BEST!
Thanks for the very nice feedback. It's supposed to be Awesome - or at least make it easier and faster to perform the common overclocking operations. |
|
|
|
|
Show Posts
