Is your friend sure that the BIP39 seed phrase he had was generated year 2010?

BIP39 seed phrase was introduced year 2013 so how did he generate his seed phrase before?

Have you tried to use the function called "detect existing account" on Electrum?
It should be able to detect and point you to the right wallet with used addresses but if not the seed phrase he had is not generated from any BIP39 wallets.

Currently, we don't have a permanent solution for this, Canaan didn't release any commands to permanently save the parameter you sent via the FMS app.

If you want to push your miner and improve hashrate I suggest use the performance mode under pool configuration.
That's the only permanent solution to keep your miner run in high-performance mode.

Currently, COM is listed on Coinmarketcap but not in Coingecko, and according to Coinmarketcap the current position of BRC20.com in market cap is #2263 which is far beyond the 7th largest market cap.

This token can be traded on 8 exchanges not listed yet on big exchanges.
About their plan and development activity check their telegram and white paper on Coinmarketcap.

- https://coinmarketcap.com/currencies/brc20-com/#About

No much info what the cause of the temp reading issue?
I'd like to suggest download the WhatsMiner tool to find the issue and error codes.

You can download the Whatsminer tool from this link below

- https://microbt-whatsminer.com/tools-download/

Once you find the error codes shown on this tool check the error code under this link below and then follow the solution according to the error code.

- https://www.zeusbtc.com/articles/asic-miner-troubleshooting/1688-how-to-deal-with-fault-codes-of-whatsminer-series

No luck many people use Viabtc accelerator they are waiting every hour and not only real users I do believe someone also uses a bot and bypasses the captcha to submit their unconfirmed transactions.

We already discuss this check the thread below

- https://bitcointalk.org/index.php?topic=5479485.0

The link already posted above faster than mine.

Airdrops are legit but the problem is we do not know how legit is y24 token.
Currently no data yet on Coingecko it doesn't even have any announcement here on the forum and it can't find much info about this and we do not know why this token was created or any future plan for this project(Roadmap).

What I see on their Twitter page it is restaking which makes you passive income up to 86% APY.
For me, it's obvious they made this as an investment token we know almost all investment sites/projects out there are scams if it was just made to let your investment grow by almost 86% APY with no roadmap or purpose why this project was created.

Well, it's way safer if you run a Bitcoin node in a Linux OS.
Based on Samourai Dojo documentation they didn't mention Windows OS but Linux environment so I think it's time-consuming if you still want to recover corrupted data from a virtual machine and fix them.

It would be better to start over again but this time instead of using a Virtual Machine use an extra hard drive/SSD to install Linux OS and Bitcoin node.

Edit:
I found a guide that I think that fits to your needs if you want to stay using Windows you will need an extra device to install a Bitcoin full node server.
Read this guide "[GUIDE] The simplest Full Node guide ever. [GUIDE]"

I don't think Bitcoin Core would work normally on Raspberry 2 it didn't meet the minimum requirements.

Read the minimum requirements here https://bitcoin.org/en/full-node#secure-your-wallet

It requires 2 GB so this unit where you plan to install the Bitcoin core would not work normally due to low memory unless you configure it to use less memory.

For me, I think it related to Crypto trading strategies because most of the guides out there are not free if you can provide detailed trading guides and new strategies for free many of us will be happy.

I agree with others too that wallet-related guides and how they can secure their wallet will help many people if you can provide a detailed guide about wallets and security. Also, take note of Web3 because this is the most keyword used on Google searches these days.

You can try there is someone here who tested it he went to 1166pro immersion but he experienced some issues with two hashboards not working and the one hashboard working randomly. However, his two miner works normally without fan.

Check his thread here https://bitcointalk.org/index.php?topic=5377607.0

No one knows what will be the price of Shiba Inu after 10 years but there is a possibility that it could reach 0.002$ however, since it wasn't created for adoption it's very risky to hold such a big amount 1b Shib is around $10k and take note it's not a coin but a token, unlike Dogecoin.

If I were you instead of investing all of your money in Shiba why not diversify your investment and not focus on Shib because there are lots of other options that have more potential compared to Shiba Inu like Solana or Cardano.

I am sometimes lucky to see a few free remaining submissions on their accelerator the last time I used it was last week but right now I tried every hour always zero free submissions. I believe someone uses bots to automatically submit unconfirmed transactions.

Viabtc Captcha is very basic and easy to bypass they should replace the reCaptcha with Google reCAPTCHA v3 to get rid of these bots or else no real users can use their free accelerator.

Never heard of it but I saw their reviews there are some bad reviews and good reviews.
I checked Whois and it was 6 months old their contact info is located in Arizona but according to some articles out there and their "About Us" they are located in Hongkong China.

For me, I can't trust my documents to them because they lied about the location.
Their service might work for you but it might not work for others.
It's risky for big transactions so only deposit that you can afford to lose.

Faucets before gave you instant Satoshi directly to your Bitcoin address but right now there's no faucet where you can claim satoshis directly to your wallet, most of the faucets right now have a withdrawal limit and it's time-consuming before you reach the required amount to be able to request for withdrawal.

If you still looking for Bitcoin faucets we have a section here where you can find them including other coins check the link below.

- https://bitcointalk.org/index.php?board=212.0

I don't think Bitcoin developers would switch from POW to POS-based consensus but that's a good alternative solution to the current network congestion.

However, this is impossible to happen. The only solution that I can see is to remove BRC20 or needs mass adoption of the lightning network or they need to add more ASIC units to increase the network hashtate because it can help confirm transactions fast.

On the first attempt accessing the website, it keeps loading on Cloudflare checking I'm stuck there until I disable the desktop mode now I can access the site.

The design looks fine to me it was a dark version before and now it's a light version but you can switch to dark mode if you want under the menu or top-right corner.

All buttons are functional and fast same goes for the Tor browser all of them are functional. The page size is 80kb according to some checkers and the performance of the sites is great.

About "LetterGuarantee.txt" it shows the date, deposit/your BTC address, service fee, PGP fingerprint/signature, and warnings. The format is just the same as other mixers out there.

The mixing process on basic anonymity is smooth after waiting for a few hours it takes hours for me to receive BTC but I think the issue is due to network(transaction fee) spikes recently. Other options are a bit expensive so I can't afford to test them.

The only downside of this it uses a cloud flare which we know records the IP address of their customers/visitors. So I'm not sure but since you said you don't keep logs how about the Cloud flare? So I think better bring your customers to Tor link instead to avoid this.

Another thing is there are some issues with the website related to accessibility you need to fix them look at this link below.

- https://pagespeed.web.dev/analysis/https-webmixer-io/20r3dwjxjt?form_factor=mobile

So you are looking for a software/program to automatically shut down the miner and rerun it when needed?

I think awesomeminer is what you looking for where you can set rules for your ASIC unit to pause or stop the miner it drops the power or it runs at idle mode it's not hashing but it consumes power.

Check this link
- https://support.awesomeminer.com/support/solutions/articles/35000085907-rules-detect-mining-issues-and-automate-tasks

I'm a bit confused what exactly wallet do you use?

If you talking about bitcoin.com when you create a wallet it should give you 12 words phrase so who sent you the wallet.data?

Can you check the email who sent you the wallet.data?
Maybe the wallet app you talking to is a different wallet?

What is new to you? Do you mean you bought this unit brand new?
Where did you buy it?

Based on the logs only 2 hashboards are detected and under ECMM it shows abnormal it indicates the hashboards/control board is not communicating properly or the hashboard is faulty.

You can try to disconnect all hashboards first, clean all plugs and terminals with isopropyl alcohol, plug them in again make sure it's fixed, and then run it again and check for any changes on the logs.

I don't think 2FA would become a problem on the forum because it was created as an extra security layer for your BTT account. Another thing is if you know you didn't log in and requested for 2FA code and you receive an email about the 2FA code you should be aware that someone is trying to phish you.
You can avoid them and put them into spam once you receive an OTP without requesting it or without signing in.