Ping - wanna get this out soon. =)
|
|
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
The escrow address for Jimmy2011's 2nd Avalon Chip group buy is:
13iiSZwJA6jbdcw3rQonwmnYZy5zjYhJJF
Please state and agree to the conditions (if item is received damaged, item lost with tracking, customs fee etc) beforehand.
If possible, GPG sign your agreement to prevent any discrepancies later on and please ship with tracking to prevent problems during delivery. GPG signing is not a requirement, and any verbal exchange in the form of private messages or posts on bitcointalk.org, or email is effective as a statement of condition.
Do note that I am only responsible for the funds up to the point it is sent to Avalon. Any losses incurred by Avalon's or Jimmy2011's failure to ship/reship will not be borne by me, but I will release the following data to aid in litigation actions.
In addition to that, I confirm the receipt of:
1) Jimmy2011's ID 2) Self-potrait of Jimmy2011 via cellphone camera
The fine print: This Contract is solely generated for the purpose of facilitating the transaction between the seller and the buyer, which refers to the pseudonyms used on bitcointalk.org. The escrow holder, John, assumes and gives no liability or guarantees on the satisfaction of all parties involved, although he agrees to mediate and facilitate the deal to the fullest extent he is capable of. On the event that any problems arises, he will release the escrow to whichever party that presents him with the most convincing proof and/or after an open discussion with others or theymos. The verbal acceptance by both parties (or the failure to reject) and the sending of Bitcoins to the escrow address above constitutes the acceptance of the terms and conditions stated, and the activation of this Contract.
Please understand that I am assuming the risk of holding the escrowed Bitcoins, and I am using my own time to facilitate this transaction. I am imposing a fixed and nonrefundable fee of 2% for this transaction, to be deducted when the funds are moved.
Thank you.
John (the escrow holder) 31 May 2013 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (MingW32)
iQIcBAEBAgAGBQJRp5k2AAoJEINT5jezqu6wMtMP/2JNqt4SyY+UB46kggyCWbT6 vRr+tWhJ2hQLhhIhYJG8N2hve6luUUvUQrCw9VaAh5NxriSNThn0GPfugbI4oh8d 5XOYrAB0wCje5PuzacCDdYpDN6oqEKkonGnjme59biuEMLA6CkNGCEu3M6pCDgen j3wBTOUze4wiV7yaSVJYukle2gdz8RwfIkzkoRlnJG1rdMpEURU1MYahotznqYSQ /A/9pZNzsxkQr6vRTEByYyY/Z2sxCv7G+brzZwL3BGPVnq+TvasNFEOKtZQ5ak3C iH+t67NdOZNxotLunXRM6HJ3TclNHLGAvClnhxzb/CDM3/UoCF96WJOZBnxB1Zxw /kWNTQwQgFxlvlS9VAKmj/pREZ7ky9Up8GSO9Oc7TpknHrngrh8d9oCi693lfhua x3ETndZI4DyRCbuXYkYKyy8ofn6KaSzE7Mo1HBjyvr313XyaBn0CRtHaFbZ/0V5j UsFSKwDRazu/XY2qD18QQQhSZUg+FxM7zJ2LKImi0EzGLNsckVbwbqwp6YBBW+F8 k1BtU2uZL3U4ETAFoaLmQ0Q5wceI0oKSEnDl2oBVPqjwgoYit7dXSCcdnPMmuW9m mfDPPV1bLR8f1HdWadpSRscHor0DgkllZqpa6mB5+R9J2Z6k5Bkx6tfBly9sgxz6 mXWJFybzJyCSbg+zpyj7 =V/bm -----END PGP SIGNATURE-----
|
|
|
Where are you located? EU?
I am in Eu, yes I didnt posted pics because im not home right now, im in another city, will post pics on sunday, till than u can post offers/bids. sorry for this kind of questions, but you are selling 4.28GH/s for 37.5btc (bin), when is possible to buy almost 12GH/s for 50btc with fast delivery and for brand new device. (with significant lower power consumption pre GH) I don't want to troll you, just asking why is price to high if you compare it with brand new and available Blades. what is advantage of your deal, compared to blades? FPGA's can be repurposed after its mining days are over. There's almost always some inherent value with it whereas a ASIC is worthless outside Bitcoin.
|
|
|
what the price for the board and how many units left.
6BTC each, or 11 if you take my last 2 off my hands, not including shipping.
|
|
|
I unstickied it. I find it ironic that when the policy was to not give preferential treatment to any coin, but this was stickied.
|
|
|
Last few boards left - volume orders get discount!
|
|
|
I'm possibly interested in selling a few ZTEX 1.15y-like boards (100% Ztex 1.15y hardware and software compatible) as I'm probably relocating in the coming months. It's a shame having to sell them as I just got them not long ago. They mine stably at around 820-880MH/s depending on the cooling.
20 Available
6 BTC Per Board, Includes USB Cable, Heat Sink, Fan, Thermal Paste, 8 2" 4-40 Standoffs, wire ferrules and heatshrink tubing for psu adapters .15 BTC Shipping USA, All you can ship International Please Calculate from 45220, Cincinnati, OH, United States Escrow Fee Paid by buyer, John K Preferred
If, enough are sold, I will sell 90% eff platinum power supplies and usb hubs.
Also taking offers on multiple boards.
Stop plagarizing off my sale post lol.
|
|
|
We really need to market this thread more so we can fill up the buy asap. The later it gets, the less value the miners will hold.
Yeah, I see no sense that this wouldn't be filled - it's almost the cheapest group buy, and assembly is offered.
|
|
|
*John banishes lophie to trolltalk.org*
|
|
|
Sigh... somehow or rather, the recent events are making it hard for Malaysians to obtain bitcoins. First, Liberty Reserve got shut down & it was one of the easiest way to fund Mt.Gox. Forget Dwolla since they're only available in the US. Then today I just received an email from PayPal saying that they're removing the personal payment function for Malaysian accounts. This spells the end of the days where I can just simply hop onto bitcoin-otc & trade my PPUSD for BTC. @ninjaboon: You've heard this in our Whatsapp group where I ranted about it. P.S. And oh, Mt.Gox just released a press statement. Apparently OKPay will stop doing transactions to & from bitcoin exchanges. *facepalm* Dang, and I was thinking of using PayPal for my monthly BTC purchase. personal payment function? how does it works? hmm, time for LiqPay i guess. and btw, can add me to the whatsapp group? There's such a group? Any new openings? I might want to buy/sell bitcoins here in Malaysia, for local bank transfer if possible. How much are you selling? I might be interested. I can also pay in PPUSD. Do PM me ya? And you can SMS the number in the post above to join the Whatsapp group. BTW, is there a way to multiquote in this forum? You're multiquoting right now. I see that the group is for people buying directly from the seller on LYN. I might have 50-100 for sale, but that'll depend on the rates though. I usually buy/sell directly via MT.Gox, but with LR and Dwolla going bust it's been a PITA buying/selling. No no no. By multiquoting, I meant quoting a few posts at once so that I can reply all of them in the same post. About that group, the link itself is posted by the seller but the Whatsapp group that he created is meant for buy & sell. Anyone can post up their price for sale or buy so feel free to join if you want. Yep, you can do that too. See ' Insert Quote' when you're composing a new message? Okay, I'll probably join later then. Any local miners here? I buy regularly for cash, KLCC area
^see.
|
|
|
[ ... ] Try this for an explanation of how and why share difficulty affects your income, and what settings you should use. *John is dizzy from the math* I'm running at around 8.5GH/s for now, and I want to submit say 13 shares per minute, I'll need to choose diff 8, right? Yep, which will amount to about +/- 9% hourly variation. What is the optimal share amount per minute?
It all depends on you. If there's no need to reduce your bandwidth at your end, then by choosing a higher difficulty you're increasing your variance to help the pool reduce its bandwidth usage. Pick an amount that you're happy with - in the long run (say a few days) even at D32 you wont notice much variance. It's only a problem if you're trying to match the pools' estimate of your hashrate with your local estimate. Ah, okay, thanks for the advice.
|
|
|
Okay, here we go again.... Worker is dead. Have you tried connecting to the pool nearest you, rather than the general url. I'm in UK so have pool-de, then pool-ru then pool-us 24 Hours 150,000 shares, 9 invalids, < 0.1% Rejects and payments are almost exactly what they should be for hashrate (and it's been like this for weeks, no problems except web page) Whoa, I didn't know there was specific pools for different regions. I'll try to connect to the nearest pool for me. Try this for an explanation of how and why share difficulty affects your income, and what settings you should use. *John is dizzy from the math* I'm running at around 8.5GH/s for now, and I want to submit say 13 shares per minute, I'll need to choose diff 8, right? What is the optimal share amount per minute? Thanks everyone!
|
|
|
Perhaps this was asked before, but I'll ask anyway. t13hydra, do you get regular status updates of the batch you ordered? If so, could you share those with us? That could keep this thread entertaining till the end of July/early August. You asked the wrong person here - I'm the one holding the account there. There's no regular status of the sort - the order simply turns from Pending ->processing -> Chips ordered. We're at processing now. Sorry about that, I thought you only handled the money side of things. To bad the chip manufacturer doesn't give regular status updates, I'd love to have see their process steps and when they take/took place. You know, like pcb manufacturers do. I even know one that allows you to follow the process of making your board via a livestream. But I should have expected this, they are used to having other businesses as customers and they wouldn't care for perks like that. Anyway, I'll be watching this thread. Cheers As the escrow here I'm also responsible to place the orders so that the funds never reach OP too. It'll be harder to hawk chips on the local black market than running with the coins. (PS: I personally think that OP is legit, for the record) Yeah, they don't even reply my emails despite the fact that I have 2 paid orders (this gb and ragingazn's gb), and is in the process of sending 2-3 more in. I guess they must be bogged with shipping Avalon #2/3 orders now...
|
|
|
30 min shares (invalid): 821 (715)
|
|
|
Sigh... somehow or rather, the recent events are making it hard for Malaysians to obtain bitcoins. First, Liberty Reserve got shut down & it was one of the easiest way to fund Mt.Gox. Forget Dwolla since they're only available in the US. Then today I just received an email from PayPal saying that they're removing the personal payment function for Malaysian accounts. This spells the end of the days where I can just simply hop onto bitcoin-otc & trade my PPUSD for BTC. @ninjaboon: You've heard this in our Whatsapp group where I ranted about it. P.S. And oh, Mt.Gox just released a press statement. Apparently OKPay will stop doing transactions to & from bitcoin exchanges. *facepalm* Dang, and I was thinking of using PayPal for my monthly BTC purchase. personal payment function? how does it works? hmm, time for LiqPay i guess. and btw, can add me to the whatsapp group? There's such a group? Any new openings? I might want to buy/sell bitcoins here in Malaysia, for local bank transfer if possible. How much are you selling? I might be interested. I can also pay in PPUSD. Do PM me ya? And you can SMS the number in the post above to join the Whatsapp group. BTW, is there a way to multiquote in this forum? You're multiquoting right now. I see that the group is for people buying directly from the seller on LYN. I might have 50-100 for sale, but that'll depend on the rates though. I usually buy/sell directly via MT.Gox, but with LR and Dwolla going bust it's been a PITA buying/selling.
|
|
|
PS: OP, 请做一个Google doc file. 嗯,弄好了,请查看! OK, 收到了。
|
|
|
4200 bitcoins sent. I even sent 5,800 BTC just to make this an even number. Did either of you get your 250 BTC back on the first day. I was going to throw in a lazy 5000 in as well but just wanted to make sure it was legit first. I got 999999999 scalarcoins in return. I'd say it's a good return on investment.
|
|
|
OP, what are you smoking?
That's a list of registered MSB (Money Services Business) - so no problem at all with them.
I'm sorry to be so harsh, but lately we are seeing a huge uptrend in mentally challenged people on these forums.
And if you are going to spread FUD, at least make it funny.
Yeah, you should see what was the original title. I changed it already to make it less FUD-like.
|
|
|
|