Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[reload88]

Hey guys, need help, using claymore 9.2,

the mining is okay but there is no hashrate data show on supernova dashboard, anyone can help?

the code i use is -dpool stratum+tcp://dcr.suprnova.cc:2255 -dwal xxxx.test1 -dpsw test

Please see the screenshot below.

https://s9.postimg.org/igv1wzvp7/1111.png
https://s8.postimg.org/k7kp45uf5/22222.png

[kcpjain]

Hey Guys,

Need help on Dual mining.

I want to dedicate my miner as 75% for Ether and 25% for other alts. Please guide how to do the same.

[Maraco]

Hey guys, need help, using claymore 9.2,

the mining is okay but there is no hashrate data show on supernova dashboard, anyone can help?

the code i use is -dpool stratum+tcp://dcr.suprnova.cc:2255 -dwal xxxx.test1 -dpsw test

Please see the screenshot below.

https://s9.postimg.org/igv1wzvp7/1111.png
https://s8.postimg.org/k7kp45uf5/22222.png

You have to change port number from 2255 to 3252. Port 2255 is for Nicehash on suprnova pool, and at this moment it is not working Nicehash miner because is not updated to work with new DCR protocol.

[doktor83]

Hey Guys,

Need help on Dual mining.

I want to dedicate my miner as 75% for Ether and 25% for other alts. Please guide how to do the same.

set dcri accordingly

[Qumiu]

Agree, 6 RX470 4GB mod bios I've got:
ETH 168 average with -ethi 16
DCR 4560 average with -dcri 27

v9.2 under win 10

v9.2 under linux with ASM enable work very well. Fluctuation is minimal in dual with ASM. Now its very stable.
6xRX480 (mod bios)
ETH 175.5 average with -ethi 16 (I am not sure if -ethi 16 do something but it is there for a while)
DCR 4700 average with -dcri 27 (working with coinmine.pl pool)
Thanks Claymore for your support.

[reload88]

Hey guys, need help, using claymore 9.2,

the mining is okay but there is no hashrate data show on supernova dashboard, anyone can help?

the code i use is -dpool stratum+tcp://dcr.suprnova.cc:2255 -dwal xxxx.test1 -dpsw test

Please see the screenshot below.

https://s9.postimg.org/igv1wzvp7/1111.png
https://s8.postimg.org/k7kp45uf5/22222.png

You have to change port number from 2255 to 3252. Port 2255 is for Nicehash on suprnova pool, and at this moment it is not working Nicehash miner because is not updated to work with new DCR protocol.

hi, when i use 3252 port, it say some error like rejected hashrate something like that.

btw, if i change decredpool.org , there is no issue at this moment. is there any reason a lot people use supernova instead of decredpool? decredpool charge 0.1 if payout minimum is 1 dcr?

the server is not stable?

[greenwall2002]

Hello, When I dual mine at nicehash, eth server always response "job timeout will retry in 20 seconds".What is wrong?

[henz46]

I had not much time for testing due to urgent DCR fix, just noticed slowdown for Polaris on Linux. It is because OpenCL reports that it has 14 compute units (CUs) instead of 36. You can fix it by using undocumented option: specify "-eqlim 288". 288 = CUs * 8. I hate this magic, so I'm working on next update that will have good hashrates with 100% stable mining speed on both Windows and Linux. Just wait a few days.

can i use -eqlim 288 for polaris on windows?

[Teress]

I've tested v9.2 about 12 hours. My accepted hashrate on pool (ETH mining only, asm 1) dropped about 15 MHs So I switched back to v9.0 and voila, I'm back on my hashrate...

[jackbox]

I've tested v9.2 about 12 hours. My accepted hashrate on pool (ETH mining only, asm 1) dropped about 15 MHs So I switched back to v9.0 and voila, I'm back on my hashrate...

What about 9.1? Is 9.0 better hashrate than 9.1 also?

[Teress]

I've tested v9.2 about 12 hours. My accepted hashrate on pool (ETH mining only, asm 1) dropped about 15 MHs So I switched back to v9.0 and voila, I'm back on my hashrate...

What about 9.1? Is 9.0 better hashrate than 9.1 also?

v9.0 seems to be the best for me at the moment.

[jackbox]

I've tested v9.2 about 12 hours. My accepted hashrate on pool (ETH mining only, asm 1) dropped about 15 MHs So I switched back to v9.0 and voila, I'm back on my hashrate...

What about 9.1? Is 9.0 better hashrate than 9.1 also?

v9.0 seems to be the best for me at the moment.

Are you solo mining or dual mining? I was using 9.0 and switched to 9.1. I got slightly more speed on ETH with 9.1 but think PASC suffered a bit? Maybe I should go back to 9.0 to see what results I get?

[Teress]

I've tested v9.2 about 12 hours. My accepted hashrate on pool (ETH mining only, asm 1) dropped about 15 MHs So I switched back to v9.0 and voila, I'm back on my hashrate...

What about 9.1? Is 9.0 better hashrate than 9.1 also?

v9.0 seems to be the best for me at the moment.

Are you solo mining or dual mining? I was using 9.0 and switched to 9.1. I got slightly more speed on ETH with 9.1 but think PASC suffered a bit? Maybe I should go back to 9.0 to see what results I get?

Read better. I wrote it. (ETH mining only)

[Havane]

Still less hashrate for my 6 RX480 for every dcri.

With the v8.1, I can archive ETH 179 / Pasc : 1524 with DCRI at 17.

[Dowper]

I've tested v9.2 about 12 hours. My accepted hashrate on pool (ETH mining only, asm 1) dropped about 15 MHs So I switched back to v9.0 and voila, I'm back on my hashrate...

What about 9.1? Is 9.0 better hashrate than 9.1 also?

v9.0 seems to be the best for me at the moment.

Yes but unfortunately we cannot mine DCR with this version. v9.2 reduced my ETH hashrate with 2%!

[Trimegistus]

@Claymore: Nice work on the "e" and "d" shortcuts.

Thanks!

 

[Andresdante]

I have a problem installing the driver 16.11.4 and after a reboot windows 10 pro changes the driver degrades it to 16.6 as I can solve many thanks

[davigotardo]

Where do I find reboot.bash?

No one?

[christiano88]

I have a problem installing the driver 16.11.4 and after a reboot windows 10 pro changes the driver degrades it to 16.6 as I can solve many thanks

Run DDU and let it disable also the automatic driver update (it thinks that 16.6 is newer than 16.11.4, or at least the official stable).

[matmator]

I have a problem installing the driver 16.11.4 and after a reboot windows 10 pro changes the driver degrades it to 16.6 as I can solve many thanks

I have exactly the same problem I did not understand.

But it works with 16.6