Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[siampumpkin]

I'm getting like 10% rejected shares for XVG while dual mining. All shares for ETH are okay.
what could be the cause? any1 experienced this?

Using nicehash a Blake2 I got 100% shares rejected
Now I'm testing keccak 0 shares after 15 mins

I am getting the same result with Blake

[1714898257]

1714898257

[crypt0velli]

I'm getting like 10% rejected shares for XVG while dual mining. All shares for ETH are okay.
what could be the cause? any1 experienced this?

I'm having similar issues as well what are you cards/clocks?

RX 580 8gb Sapphire Nitro+ Hynix memory
Core 1200/900
Mem 2250/950

I've got 580 8GB Sapphire Pulses with Samsung running core 1130/mem 2150/voltage 860 and getting about 3-4% rejected (0 for eth) @ 49 dcri. Based on our numbers seems like core clocks arent the issue so might be either too high memory clock or dcri? Going to tweak later today and see what I get

[jwhat]

Getting lots of rejected XVG shares on unimining, whereas zpool worked perfect for an entire day. Not sure why people are saying zpool takes significant exchange fees, just don't set a BTC wallet, set a XVG wallet. You mine XVG and they pay you in XVG.

[_voyager_]

What hash rate could I expected for bios modded RX570 8GB in ETH mode?

[Marvell2]

Getting lots of rejected XVG shares on unimining, whereas zpool worked perfect for an entire day. Not sure why people are saying zpool takes significant exchange fees, just don't set a BTC wallet, set a XVG wallet. You mine XVG and they pay you in XVG.

Uming pool was fine for a few hours now Im getting mad rejects I guess zpool it is

[rocketrunner442]

Getting lots of rejected XVG shares on unimining, whereas zpool worked perfect for an entire day. Not sure why people are saying zpool takes significant exchange fees, just don't set a BTC wallet, set a XVG wallet. You mine XVG and they pay you in XVG.

Uming pool was fine for a few hours now Im getting mad rejects I guess zpool it is

Same just happened to me. unimining was working fine over night then this morning it was just constantly disconnected. I guess issue with the pool?

[heavyarms1912]

Getting lots of rejected XVG shares on unimining, whereas zpool worked perfect for an entire day. Not sure why people are saying zpool takes significant exchange fees, just don't set a BTC wallet, set a XVG wallet. You mine XVG and they pay you in XVG.

zpool still exchanges and pays you in XVG.  That's where the fees go.

[woodaxe]

Well ive tried all 3 XVG pools  zpool are taking to much from me so im sticking with unimining  had no rejects at all

[rocketrunner442]

Well ive tried all 3 XVG pools  zpool are taking to much from me so im sticking with unimining  had no rejects at all

Let me know if that maintains after 4+ hours this morning and if you don't mind sharing the -dcri value you were using please.  Maybe mine needs adjusting. I was set to 35.

[Marvell2]

Well ive tried all 3 XVG pools  zpool are taking to much from me so im sticking with unimining  had no rejects at all

Let me know if that maintains after 4+ hours this morning and if you don't mind sharing the -dcri value you were using please.  Maybe mine needs adjusting. I was set to 35.

I have mine set to 33 myself on some cards like vegas and 1070s i have it as high as 90

[dexterop]

Claymore

My R7 260X Radeon 2gb no longer works with v11.0 while mining MUSICcoin (DAG file is 1.5GB)
v10.6 worked but had huge problems with devfee

OpenCL error -4 (0) cannot create DAG File

[EatSleepMining]

I'm dual mining XVG on antminepool now. Only got 3 rejected on 615 for now. Much better results so I'm sticking with it for now.

-dcri and pool ?

[crypt0velli]

Seem to be having much better luck with antminepool as well I was definitely having latency issues with unimining

[unkwn]

dear Claymore, would like to ask if you can adjust -ejobtimeout min time from 1 min to 10sec. get often error about no new jobs and loosing $ from this. Thanks!

also NICE JOB with new dual modes! well done. testing it

Code:

02:20:34:302	14f4	ETH:: No new jobs were received for 1 mins - something is wrong with the pool (or check -ejobtimeout and -djobtimeout options), disconnect.
02:29:44:115	14f4	ETH:: No new jobs were received for 1 mins - something is wrong with the pool (or check -ejobtimeout and -djobtimeout options), disconnect.
02:31:23:240	14f4	ETH:: No new jobs were received for 1 mins - something is wrong with the pool (or check -ejobtimeout and -djobtimeout options), disconnect.
02:42:09:241	14f4	ETH:: No new jobs were received for 1 mins - something is wrong with the pool (or check -ejobtimeout and -djobtimeout options), disconnect.
03:07:54:929	14f4	ETH:: No new jobs were received for 1 mins - something is wrong with the pool (or check -ejobtimeout and -djobtimeout options), disconnect.
03:55:57:664	14f4	ETH:: No new jobs were received for 1 mins - something is wrong with the pool (or check -ejobtimeout and -djobtimeout options), disconnect.
04:03:03:180	14f4	ETH:: No new jobs were received for 1 mins - something is wrong with the pool (or check -ejobtimeout and -djobtimeout options), disconnect.
04:49:08:962	14f4	ETH:: No new jobs were received for 1 mins - something is wrong with the pool (or check -ejobtimeout and -djobtimeout options), disconnect.

ps: I understand it might be problem from my side (internet and etc) , but I would be very glad if you adjust this settings

[Marvell2]

I was fine last night but Umining is pure crap right now , lower hash rate and 15% rejects

[EatSleepMining]

Seem to be having much better luck with antminepool as well I was definitely having latency issues with unimining

Same here switched to http://antminepool.com

Uniming gave me a lot of stale shares, disconnections and high ping

just put

-dpool stratum+tcp://s.antminepool.com:9008 -dwal walletadressXVG.nameofyourpool -dcoin blake2s -dpsw c=XVG

u see your worker name on the pool ?

[EatSleepMining]

Seem to be having much better luck with antminepool as well I was definitely having latency issues with unimining

Same here switched to http://antminepool.com

Uniming gave me a lot of stale shares, disconnections and high ping

just put

-dpool stratum+tcp://s.antminepool.com:9008 -dwal walletadressXVG.nameofyourpool -dcoin blake2s -dpsw c=XVG

u see your worker name on the pool ?

Can't find anything about  -dwal walletadressXVG.nameofyourpool in the description of the pool.
I used this .bat for ETC + Verge (blake2s):

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1-etc.ethermine.org:4444 -ewal 0x83428c64cF11af81d8a1e70c48bb375172062F69.RX480 -epsw x -dpool stratum+tcp://s.antminepool.com:9008 -dwal D9dMdBssQZRDueBzVeRUsEFzmA5smW1kQA -dcoin blake2s -dpsw c=XVG -dcri 44

Sorry, I have just corrected it just put the XVG wallet.

20min mining Total Earned      0.00000000 XVGB  15.7 Gh/s

[dragonmike]

What clocks and voltage settings are fellow Vega64 users setting for mining ETH&blake2s?
I have only been mining Cryptonight coins with my Vega rig so far but it looks like we might now have a new contender in town...

[buzzkillb]

Another dual mining .bat for Ella and XSH. 

Code:

EthDcrMiner64.exe -epool stratum+tcp://pool.ellaism.io:8002 -ewal 0x27cB6394d9E19fC96732c4Bde63006B3709589a1 -epsw x -allpools 1 -allcoins 1 -gser 2 -eworker rig1 -dpool stratum+tcp://s.antminepool.com:5766 -dwal SMZi2jBvXP3XaYg2dUPi2BnRa4ywDVUcfN -dcoin blake2s -dpsw c=XSH -r 1 -dcri 50

[crypt0velli]

Seem to be having much better luck with antminepool as well I was definitely having latency issues with unimining

Same here switched to http://antminepool.com

Uniming gave me a lot of stale shares, disconnections and high ping

just put

-dpool stratum+tcp://s.antminepool.com:9008 -dwal walletadressXVG.nameofyourpool -dcoin blake2s -dpsw c=XVG

u see your worker name on the pool ?

Can't find anything about  -dwal walletadressXVG.nameofyourpool in the description of the pool.
I used this .bat for ETC + Verge (blake2s):

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1-etc.ethermine.org:4444 -ewal 0x83428c64cF11af81d8a1e70c48bb375172062F69.RX480 -epsw x -dpool stratum+tcp://s.antminepool.com:9008 -dwal D9dMdBssQZRDueBzVeRUsEFzmA5smW1kQA -dcoin blake2s -dpsw c=XVG -dcri 44

Sorry, I have just corrected it just put the XVG wallet.

20min mining Total Earned      0.00000000 XVGB  15.7 Gh/s

antminepool is a smaller pool. From their stats page looks like they find about 4 blocks per day