Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[FFI2013]

Hi blake2s dual miner's,

Claymore new blake2s dual mining offers new opportunities of mining. It seems like all the community get interested to this algorithm. All pools were immediately cannibalized by this hashrate.

Blake2s coins are often hosted on little and often new pool. Pool operators are working hard to avoid disconnections, to support increasing hashrate and miners,…

Lots of work, fixes, patches, coffees, nightmares, new servers, coffees again… Unimining jumped from 1000 miners to 35000 miners in few days only on the blake2s! That’s amazing!

Thanks to all (remaining) miners mining on UniMining. Thanks for your confidence. We do our best every day to ensure the best quality of services, investigating and acting on every bottleneck! Some fixes should still be implemented.

We apologize if you get bad earnings and we are still working on it. If you have the solution or any suggestions… or stop blaming us on all post;

Have a nice day.  

This --> bskc member must be a legendary thief, I'm mean to come up here and say --> "hey, we at unimining are stealing you trolls and we love doing so, keep coming cause we are getting all your coins and don't worry cause we said --> Have a nice day" hehe

Fucking amazing isn't it your running a pool but tell us to stop bitching because your paying half of what everyone else is, YA I have a solution shut down your pool till you figure it out or maybe get a hold of ocminer for some help on how to run a pool

[goodbitprofit]

pools are unstable or stealing our earnings.
Keccak and Blake its old algos and all coins are dead for mining, at least how I see

[FFI2013]

I mine xvg at zpool but i write my wallet at zpool,there is DGB coins.

https://www.zpool.ca/?address=DPqkhuNKCgawmqb1ACcKPppebfzTQdbYmw

What's the problem? I never mined dgb and i don't have this wallet. This is my Verge wallet lol. like this;
http://nlpool.nl/?address=DPqkhuNKCgawmqb1ACcKPppebfzTQdbYmw+

at zpool they mine a lot of different coins so sometimes your wallet address could be similar to a different coin thats why they ask to put c=XVG or the coin your getting paid in your password

[hozerdev]

Just wanted to share that 11.0 rock solid, no single freeze or spurious reboot, while on 10.3/10.6 it was rebooting several times per day.

[nazarpechka]

New stable blake2s verge pool:
http://xvgminingclub.info/
low fee, hashrate growing rapidly
we find blocks very often
try it yourself!

[BobsNotYourUncle]

Just wanted to share that 11.0 rock solid, no single freeze or spurious reboot, while on 10.3/10.6 it was rebooting several times per day.

Ditto. Wish I had the sense to check for an update sooner, especially with the new algos added!

[Ursul0]

PLEASE HELP.
I have one rx 580 OC Edition.. I boy on one men 2 rx 580 oc edition too.. My gpy give me 24,6 mh/s.. i now create rig, and gpu 2 and gpu 3 give 28.2 mh/s.. and work few minutes and restart miner or gpu 3 go down on 0 mh/s -_- i read that is becaose he OVERCLOCK that two gpu and because miner restar -_- PLEASE HELP how to restore that 2 gpu on default like my gpu?

Lol. this is some weird translation I suppose. Do lower your memory clocks to increase stability. And approach each GPU differently sometimes the difference can be confusing.
I have some 12 GPUs rigs that have same cards(all Sapphire Nitro+ 570, Elpida ) some work fine on 2075-2066 and some others on the same rig may have issues if above 1850 (although its statistically very low amount of GPUs)
Normally the minimum that you can get fro polaris is 28MH (older rx470 refs  could be even lower depending...)

The cards you have probably should be good to give 30+ stable. What's the maker of the "rx 580 OC Edition"?

The era of GPU mining SIA is GONE! If you notice the total share found on sia nanopool has been at ZERO for almost a month. Now ASICs are taking over and trust me you get nothing if continue mining.

I'm not entierly sur ewhat is it you are saying... and why.. although interesting seems only relevant to nanopool, which I consider not a good pool anyways.
https://siamining.com/stats
EDIT: the graph at the link s rather short though

[shynepapin]

I almost thought I was going to be the only one having this issue but its good to see I'm not the only one. But, one fear is the issue would get swamp with all this pool and verge talk that Claymore might not see it and no suggestions would be made as to how to resolve it. I do have my .bat file in my startup folder so whenever rig crashes and restart I can get back to mining but unfortunately that is not enough to undermine the issue as sometimes rig crashes and restart gets stuck.

Anyway, I'll be working continue on the issue and as soon as I find a stable enough solution, I will share with you, because for me this has been happening for a while and I have always thought it was due to undervolting or overclocking and I have basically  had my 14 GPU's on these 2 rigs back to default and still no improvement.

Will try to reinstall windows 10 entirely soon and hope that helps but can't get to that till probably the weekend.

I presume you are mining ETC ? I ask since you state you use allcoins-1 which is for the forks
If it is ETC then try "-allcoins etc"

Not mining ETC but mining other forks.

[krasent]

New stable blake2s verge pool:
http://xvgminingclub.info/
low fee, hashrate growing rapidly
we find blocks very often
try it yourself!

This pool after  9 hours:

RIG1 -  Hashrate: 75.2 Gh/s   , Shares: 2.1463%   Total: 94.5 XVG
RIG2 -  Hashrate: 100.6 Gh/s , Shares: 3.0897%   Total: 154.49 XVG

Make your own conclusions.

Another thief !

[53nsk]

First of all - thanks Claymore for the great app.
As for XVG pool - xvgminingclub.info seems fair and so far is much better than others.

[krasent]

First of all - thanks Claymore for the great app.
As for XVG pool - xvgminingclub.info seems fair and so far is much better than others.

Give figures based on what's better?

[53nsk]

First of all - thanks Claymore for the great app.
As for XVG pool - xvgminingclub.info seems fair and so far is much better than others.

Give figures based on what's better?

Almost no rejected shares, stable connection, stable payouts, no orphan blocks, more coins than whattomine predicts (this is just luck at this moment). I can make a screenshot, if you need.

[djmuler]

Just wanted to share that 11.0 rock solid, no single freeze or spurious reboot, while on 10.3/10.6 it was rebooting several times per day.

+1

With older claymore versions, I got several restart per day beacuse "WATCHDOG: GPU 5 hangs in OpenCL call, exit", but with 11.0 my rig is running smoothly for +48h now.

Great job Claymore

[big_daddy]

Which dual mining coin is the best now ?

I'm mining ETH+SC but sc is now not the good investment. Anyone has any recommendation?

try ETC+XVG 
You'll see the difference by april 2018

[Metroid]

Just wanted to share that 11.0 rock solid, no single freeze or spurious reboot, while on 10.3/10.6 it was rebooting several times per day.

+1

With older claymore versions, I got several restart per day beacuse "WATCHDOG: GPU 5 hangs in OpenCL call, exit", but with 11.0 my rig is running smoothly for +48h now.

Great job Claymore

There is nothing different concerning that, what you got is just an issue you had to deal yourself and you blamed claymore's previous version, now that a magical fix came, you are saying this version solved the issue hehe, amazing how many noobs we have here mining hehe

[Hodlmyhand]

New stable blake2s verge pool:
http://xvgminingclub.info/
low fee, hashrate growing rapidly
we find blocks very often
try it yourself!

Can't connect? is it working right now?

[munGoMine]

New stable blake2s verge pool:
http://xvgminingclub.info/
low fee, hashrate growing rapidly
we find blocks very often
try it yourself!

Can't connect? is it working right now?

Wasn't working for me too.
In the russian chat at the bottom I deciphered that you can also use stratum+tcp://185.185.70.246:5766

I tried and it connected.

[Hodlmyhand]

New stable blake2s verge pool:
http://xvgminingclub.info/
low fee, hashrate growing rapidly
we find blocks very often
try it yourself!

Can't connect? is it working right now?

Wasn't working for me too.
In the russian chat at the bottom I deciphered that you can also use stratum+tcp://185.185.70.246:5766

I tried and it connected.

Thank you mate! it is connected now

[serendipity969]

I haved myself this problem. It is the internal temp sensor of the GPU. If you look to the Claymore info maybe will see (until it crash) the higher temp. So do this firstly :

1. try to use a mini air-compresor and blow up the dust from the GPU
2. change the place of this hot GPU with other one
3. if the warranty it not pass, unscrew the radiator and change the siliconic paste , before clean the old one.

For me it works on 1+2 ( for now)

Getting this error while running version 10.6 and can't figure out how to stop it:

03:36:40:155   1200   GPU 0 temp = 69, old fan speed = 50, new fan speed = 40

03:36:40:171   1200   GPU 1 temp = 68, old fan speed = 49, new fan speed = 40

03:36:40:186   1200   GPU 2 temp = 68, old fan speed = 55, new fan speed = 40

03:36:40:233   1200   GPU 3 temp = 72, old fan speed = 69, new fan speed = 58

03:36:40:249   1200   GPU 4 temp = 74, old fan speed = 63, new fan speed = 53

03:36:40:280   1200   GPU 5: got incorrect temperature 511, ignore
03:36:40:280   1200   GPU 6: got incorrect temperature 511, ignore

It shuts the miner down.  I am running 7 Sapphire rx 480 8g cards with Windows 10, and I have not figured out what to do to get rid of it.  May be the result of using a pcie splitter on the 6th slot, but I have 40 other machines just like it and none of them are doing it.  Please share any experiences you have with this to give me some ideas.  I have reinstalled the drivers 3 times (August 234d blockchain drivers) flashed the video cards' bios back to the original, and removed all control parameters from the miner.  Looking for the "what else" I can try.  Thanks.

[xodes777]

GPU0 t=53C fan=64%, GPU1 t=54C fan=46%, GPU2 t=53C fan=71%, GPU3 t=53C fan=64%, GPU4 t=54C fan=63%, GPU5 t=56C fan=66%, GPU6 t=51C fan=35%
10:28:43:793   11f0   em hbt: 16, dm hbt: 16, fm hbt: 109,
10:28:43:793   11f0   watchdog - thread 0 (gpu0), hb time 78
10:28:43:793   11f0   watchdog - thread 1 (gpu0), hb time 156
10:28:43:793   11f0   watchdog - thread 2 (gpu1), hb time 109
10:28:43:793   11f0   watchdog - thread 3 (gpu1), hb time 31
10:28:43:793   11f0   watchdog - thread 4 (gpu2), hb time 109
10:28:43:793   11f0   watchdog - thread 5 (gpu2), hb time 31
10:28:43:793   11f0   watchdog - thread 6 (gpu3), hb time 16
10:28:43:793   11f0   watchdog - thread 7 (gpu3), hb time 78
10:28:43:793   11f0   watchdog - thread 8 (gpu4), hb time 16
10:28:43:793   11f0   watchdog - thread 9 (gpu4), hb time 109
10:28:43:793   11f0   watchdog - thread 10 (gpu5), hb time 94
10:28:43:793   11f0   watchdog - thread 11 (gpu5), hb time 172
10:28:43:793   11f0   watchdog - thread 12 (gpu6), hb time 78
10:28:43:793   11f0   watchdog - thread 13 (gpu6), hb time 16
10:28:43:793   11f0   WATCHDOG: GPU error, you need to restart miner

Why does such an error occur? If you disable watchdog (-wd 0) everything works fine! In version 10.2, there is no such error! What's wrong ?
 No rejects No wrong ETH shares!