Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Vann]

SMART is more profitable for Polaris ATM.

http://whattomine.com/coins/197-smart-keccak?utf8=%E2%9C%93&hr=140.0&p=40.0&fee=3.0&er_enabled=true&er=0.00002407&cost=0.12&hcost=0.0&commit=Calculate

http://whattomine.com/coins/220-xvg-blake-2s?utf8=%E2%9C%93&hr=1100.0&p=40.0&fee=3.0&cost=0.12&hcost=0.0&commit=Calculate

[Ratledge]

Why the hell someone would copy the whole first post???

Lack of sense and obviously can't read, either.

I am fairly certain that we have all seen it - at least three or four times, now - if we never looked ourselves.

[Neu_Cinetico]

Agree, i'll also stop the xvg too, it seems to be a mafia. The only pool i've tested and didn't stealed me was NLpool but 1 day later it was unusable. It does gpus stressing a lot for a few bucks.

Let me tell you that the amount of work to make a stable pool is beyond imagination. In the last few days we invested a huge amount of money to get enough hardware and also a huge amount of effort to get the pool stable. I think this goes for most of the pools at the moment.

It is not that you just push a button and it works magically, but it takes hours of debugging, looking in logs and sleepless nights with crashes etc.

So, i will tell you guys just as it is. For now NLpool is stable since about 16.00 Amsterdam time. If you want, you can use it ... and we don't steal.

Thanks, keep the good work

Hope there the last of the problens

[groovytechno]

Why the hell someone would copy the whole first post???

I feel like that was a bot.

[cryptoillusion1]

I have a rig with 4 RX 570 and 4 RX 550 for " filling the slot and the power supply"

There is a way to run Claymore only on the 4 RX 570 and I will find something else (cryptonight) for the 550 ?

I was unable to find a set  a -DCR that didn't block the 550 and let the 570 work

Or Can I run two istances of claymore ?

You can run two instances of the miner
Use -di 0123 (where 0,1,2 and 3 are the RX570)

[nasopraso]

Hi,

I have some question

1. Where we can see all algo that support Claymore miner?
2. I mining now Verge with Blake2s. But what is difference between Blake2s and Blake2b? According to this site https://blake2.net/ Blake2b is more faster...can we mine with Blake2b on Claymore?

Regards

[ANewMiner]

I cant seem to download the 11th Feb version of the windows client the site its on says it has a virus - I turned off my AV so its not me

[shynepapin]

I don't know if anyone is having the same issue as I have with Claymore V11.0. Miner crashes and causes Rig to restart when the next DEV Fee mining starts creating DAG. I use allcoins -1 to help combat this but to no avail, which does create ETH Dag file when claymore miner starts, mines dev fee only then before crashing at next dev fee mining.

I've also tried the -eres 3 option, so memory is allocation for 3 dag file buffers before memory reallocation, still the same problem at the 2 hour mark or less some times, miner crashes with random GPU memory errors. I have reduced my memory clock drastically to figure out what's really causing this, if it's overclocking, but rig runs stable without any memory errors until dev fee mining returns and then rig crashes with any random gpu memory error.

Any help with this would be appreciated as this is a plague on 2 of my RX570 rigs.

[sentel]

Agree, i'll also stop the xvg too, it seems to be a mafia. The only pool i've tested and didn't stealed me was NLpool but 1 day later it was unusable. It does gpus stressing a lot for a few bucks.

Let me tell you that the amount of work to make a stable pool is beyond imagination. In the last few days we invested a huge amount of money to get enough hardware and also a huge amount of effort to get the pool stable. I think this goes for most of the pools at the moment.

It is not that you just push a button and it works magically, but it takes hours of debugging, looking in logs and sleepless nights with crashes etc.

So, i will tell you guys just as it is. For now NLpool is stable since about 16.00 Amsterdam time. If you want, you can use it ... and we don't steal.

Ok, I gave another try. 1:30 hours of mining and got nothing. Will check later of it is just delay in showing the earned coins or just it is not working at all. Anyway cannot continue to lose money.
I am done for now. When more users confirm everything is fine maybe will try again.
And yes I am sure it is not easy to make it work properly but when you claim it is working make sure it is really working.

[krasent]

Agree, i'll also stop the xvg too, it seems to be a mafia. The only pool i've tested and didn't stealed me was NLpool but 1 day later it was unusable. It does gpus stressing a lot for a few bucks.

Let me tell you that the amount of work to make a stable pool is beyond imagination. In the last few days we invested a huge amount of money to get enough hardware and also a huge amount of effort to get the pool stable. I think this goes for most of the pools at the moment.

It is not that you just push a button and it works magically, but it takes hours of debugging, looking in logs and sleepless nights with crashes etc.

So, i will tell you guys just as it is. For now NLpool is stable since about 16.00 Amsterdam time. If you want, you can use it ... and we don't steal.

Ok, I gave another try. 1:30 hours of mining and got nothing. Will check later of it is just delay in showing the earned coins or just it is not working at all. Anyway cannot continue to lose money.
I am done for now. When more users confirm everything is fine maybe will try again.
And yes I am sure it is not easy to make it work properly but when you claim it is working make sure it is really working.

2:01h = 4XVG same shits

[JanxSpirit86]

why is tht nobody talks about keccak...i think its also doin good compared to xvg at the moment with al the pool problems..mining smartcash at 365mhs and 61mhs eth wit my 2 rx580 armor oc.is it fine...wht do u guys think...

Very good indeed. Thanks!
I got the same results 6 x rx580 184eth, 1100smart. Sweet spot dcri 6.

[argai666]

Anyone successfully mining SHIELD (blake2s algo) coin?
I tried a few times but unable to set it up? not sure if the it claymore exe or something else is going on.

I tried xsh on antmine and nevacoin on unimining. Both were succesfull for me.

[Marvell2]

smartcash might be more profitable now but, verge is ready for a massive pump, so people are loading up

[cryptoillusion1]

**BLAKE 2s Mining related topics

Hi all
I have noticed that Claymore's dual ethereum topic has been filled with discussions of Blake 2s pools and XVG...none of it is related to the miner as such
I feel is best to have a separate topic instead of hijacking Claymore's topic.

I have created a new topic just for this https://bitcointalk.org/index.php?topic=2986613.new#new

Hope everyone posts in this topic so that this topic will be for pure miner issues and not XVG pool related.

[sentel]

why is tht nobody talks about keccak...i think its also doin good compared to xvg at the moment with al the pool problems..mining smartcash at 365mhs and 61mhs eth wit my 2 rx580 armor oc.is it fine...wht do u guys think...

Very good indeed. Thanks!
I got the same results 6 x rx580 184eth, 1100smart. Sweet spot dcri 6.

Which is the pool?

[goodbitprofit]

I don't know if anyone is having the same issue as I have with Claymore V11.0. Miner crashes and causes Rig to restart when the next DEV Fee mining starts creating DAG. I use allcoins -1 to help combat this but to no avail, which does create ETH Dag file when claymore miner starts, mines dev fee only then before crashing at next dev fee mining.

I've also tried the -eres 3 option, so memory is allocation for 3 dag file buffers before memory reallocation, still the same problem at the 2 hour mark or less some times, miner crashes with random GPU memory errors. I have reduced my memory clock drastically to figure out what's really causing this, if it's overclocking, but rig runs stable without any memory errors until dev fee mining returns and then rig crashes with any random gpu memory error.

Any help with this would be appreciated as this is a plague on 2 of my RX570 rigs.

I was update to 11 few weeks a go, but same problem only started from today. After Dev fee, speed just drop, and after half hour restart.
Wondering what can be a problem?

[Ratledge]

What's the syntax for setting up a worker name with XVG?

I thought I remembered seeing something like ID=concatenated onto the p= param but looking back a few pages I can't find it.

By the way, mining Verge IS a topic for discussion here. Claymore added blake2s and keccak to the latest v 11 edition, and there is precious little information on the details beyond the very basic requirements.

[Deadly0]

Is someone tried to mine keccak coins? I've tried to mine CREA and Smart Cash but all my shares were rejected!
My configs:

Code:

# CREA
POOL: stratum+tcp://yiimp.eu:5134, WALLET: CShBAVkbYJ9536nrLNnEfL12tkvQy2NbqS
POOL: stratum+tcp://stratum.rapidpools.com:3032, WALLET: CShBAVkbYJ9536nrLNnEfL12tkvQy2NbqS.rig01, PSW: x
POOL: stratum+tcp://s1.creapool.club:5134, WALLET: CShBAVkbYJ9536nrLNnEfL12tkvQy2NbqS.rig01, PSW: x

# Smart Cash
POOL: stratum+tcp://pool-eu.smartcash.cc:3333, WALLET: SP9zMdYushh3bM9cYEvWdF2y52sai4xnFf.rig01, PSW: x

and -dcoin keccak
What am i doing wrong?

[fanisk21]

Is someone tried to mine keccak coins? I've tried to mine CREA and Smart Cash but all my shares were rejected!
My configs:

Code:

# CREA
POOL: stratum+tcp://yiimp.eu:5134, WALLET: CShBAVkbYJ9536nrLNnEfL12tkvQy2NbqS
POOL: stratum+tcp://stratum.rapidpools.com:3032, WALLET: CShBAVkbYJ9536nrLNnEfL12tkvQy2NbqS.rig01, PSW: x
POOL: stratum+tcp://s1.creapool.club:5134, WALLET: CShBAVkbYJ9536nrLNnEfL12tkvQy2NbqS.rig01, PSW: x

# Smart Cash
POOL: stratum+tcp://pool-eu.smartcash.cc:3333, WALLET: SP9zMdYushh3bM9cYEvWdF2y52sai4xnFf.rig01, PSW: x

and -dcoin keccak
What am i doing wrong?

you need to use your login and pw of work

https://i.imgur.com/AgjhKYv.png

[Golempl]

Last 24h of mining XVG - Antminepool (miners hashrate 30500MH/s)
Whattomine says: 150 XVG
Last 24 Hours Payouts: ... 88.15227098
My Hashrate chart on pool is stable enough to prove my hashrate.

Last days were only like 15% lower, vs WTM,  last 24h is terrible like 40% stolen/lost
 What the hell ?