[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[mfsmarques]

For anyone who is using the motherboard MSI Z170A Gamining 5 and is experiencing instability issues and SMOS keeps restarting, here is how to resolve:

- Use Bios Version 1.C;

- Into BIOS
Settings>Advanced>PCI subsystem Setting
PEG 0 and PEG 1 set to Gen2
Above 4G Decoding set to Enabled

- Settings>Windows OS Configuration
Windows 8.1 / 10 = "Disabled"
Windows 7 = "Disabled"
MSI Fast Boot = "Disabled"
Fast Boot = "Disabled"

i tried your settings with MSI z170a Gaming M5
i just cant start the OS if i put 4+ GPUs
it works well with 4 gpus but couldnt boot if i put 5th GPU.
PS: I have the latest BIOS
Anyone has a solution?

With the last version not boot, I only managed with 1.C

[1715091803]

1715091803

[1715091803]

1715091803

[1715091803]

1715091803

[1715091803]

1715091803

[davigotardo]

I am not able to configure claymore with dual eth + decred pool dwarf and suprnova

-wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -dpool dcr.suprnova.cc:2252 -dwal user.$rigName -dpsw x -allpools 1 -mport -3333

I got it, friend, thank you.
Now I want to know how to put a configuration of each individual rig, as well as see separate pool results

[mfsmarques]

I am not able to configure claymore with dual eth + decred pool dwarf and suprnova

-wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -dpool dcr.suprnova.cc:2252 -dwal user.$rigName -dpsw x -allpools 1 -mport -3333

I got it, friend, thank you.
Now I want to know how to put a configuration of each individual rig, as well as see separate pool results

I do not think this can be done by the page.

[davigotardo]

I am not able to configure claymore with dual eth + decred pool dwarf and suprnova

-wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -dpool dcr.suprnova.cc:2252 -dwal user.$rigName -dpsw x -allpools 1 -mport -3333

I got it, friend, thank you.
Now I want to know how to put a configuration of each individual rig, as well as see separate pool results

I do not think this can be done by the page.

In the case in the pool all the rigs stayed as one?
Is there no way to make them appear separate?

[usmarine2141]

Continuously have issues with the RX version daily, it will just error out, and go in a loop for about 10 minutes, until i go out there and move USB stick around to diff ports, reset about 10 times. It is very frustrating.


I am using BIOSTAR Board https://www.newegg.com/Product/Product.aspx?Item=N82E16813138436

Intel Pentium CPU https://www.newegg.com/Product/Product.aspx?Item=9SIA85V4SC8071

Crucial 4gb stick of ddr3 RAM

750W PSU powering the board


http://imgur.com/a/77yH0



Any help would be greatly appreciated.

claymore is def faster.

So it is an issue with using claymore miner. it is mining without any issues using optiminer miner for zcash...

Please address issue with claymore miner on zcash.

[citronick]

Continuously have issues with the RX version daily, it will just error out, and go in a loop for about 10 minutes, until i go out there and move USB stick around to diff ports, reset about 10 times. It is very frustrating.


I am using BIOSTAR Board https://www.newegg.com/Product/Product.aspx?Item=N82E16813138436

Intel Pentium CPU https://www.newegg.com/Product/Product.aspx?Item=9SIA85V4SC8071

Crucial 4gb stick of ddr3 RAM

750W PSU powering the board


http://imgur.com/a/77yH0



Any help would be greatly appreciated.

claymore is def faster.

So it is an issue with using claymore miner. it is mining without any issues using optiminer miner for zcash...

Please address issue with claymore miner on zcash.

I have tested both Claymore and Optiminer ZEC miners.

Conclusion and IMHO, Claymore best on Windows, and Optiminer on Linux.

Claymore faster on Windows sure and some say Linux -- but Optiminer is very stable on Linux and smOS.

Currently, RX480, R9-390 and R9-Nano; total 33 rigs are selling Equihash to Nicehash, using Optiminer v1.7 on smOS latest kernel - very stable for weeks now. With smOS and SRR, farm uptime has been excellent.

Best performer for ZEC are the R9 cards. The RX480s are best on ETH but so so on ZEC.

[Talat10gu]

For anyone who is using the motherboard MSI Z170A Gamining 5 and is experiencing instability issues and SMOS keeps restarting, here is how to resolve:

- Use Bios Version 1.C;

- Into BIOS
Settings>Advanced>PCI subsystem Setting
PEG 0 and PEG 1 set to Gen2
Above 4G Decoding set to Enabled

- Settings>Windows OS Configuration
Windows 8.1 / 10 = "Disabled"
Windows 7 = "Disabled"
MSI Fast Boot = "Disabled"
Fast Boot = "Disabled"

i tried your settings with MSI z170a Gaming M5
i just cant start the OS if i put 4+ GPUs
it works well with 4 gpus but couldnt boot if i put 5th GPU.
PS: I have the latest BIOS
Anyone has a solution?

With the last version not boot, I only managed with 1.C

Now, i tried the 1.C version
Nothing changed.
Whats ur CPU Btw?
And tytanick if i remember right, u have one of those mobos. What was your solution?

[EtherBoy07]

What should be the overclock value for sapphire r9-390 card.

I could not find a reasonable value.

Claymore 9.1 will be set to retreat

[citronick]

What should be the overclock value for sapphire r9-390 card.

I could not find a reasonable value.

Claymore 9.1 will be set to retreat

1140/1500/-20 Powerlimit

R9-390s are very easy to overclock and undervolt.... but its a hungry power hogger.

[mfsmarques]

For anyone who is using the motherboard MSI Z170A Gamining 5 and is experiencing instability issues and SMOS keeps restarting, here is how to resolve:

- Use Bios Version 1.C;

- Into BIOS
Settings>Advanced>PCI subsystem Setting
PEG 0 and PEG 1 set to Gen2
Above 4G Decoding set to Enabled

- Settings>Windows OS Configuration
Windows 8.1 / 10 = "Disabled"
Windows 7 = "Disabled"
MSI Fast Boot = "Disabled"
Fast Boot = "Disabled"

i tried your settings with MSI z170a Gaming M5
i just cant start the OS if i put 4+ GPUs
it works well with 4 gpus but couldnt boot if i put 5th GPU.
PS: I have the latest BIOS
Anyone has a solution?

With the last version not boot, I only managed with 1.C

Now, i tried the 1.C version
Nothing changed.
Whats ur CPU Btw?
And tytanick if i remember right, u have one of those mobos. What was your solution?

After 6 hours it started giving opencl error.
I gave up and went back to win 10.

[mfsmarques]

I am not able to configure claymore with dual eth + decred pool dwarf and suprnova

-wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -dpool dcr.suprnova.cc:2252 -dwal user.$rigName -dpsw x -allpools 1 -mport -3333

I got it, friend, thank you.
Now I want to know how to put a configuration of each individual rig, as well as see separate pool results

I do not think this can be done by the page.

In the case in the pool all the rigs stayed as one?
Is there no way to make them appear separate?

Yes, just use the $rigName string.
What is not possible is to make each ring connect in a different pool.

[realter]

tomorow i can get PowerColor 580 4G
and i thing - started mining with RX580 on SMOS?

[drrobert]

tomorow i can get PowerColor 580 4G
and i thing - started mining with RX580 on SMOS?

Did you try to check mhs and power usage

[EtherBoy07]

What should be the overclock value for sapphire r9-390 card.

I could not find a reasonable value.

Claymore 9.1 will be set to retreat

1140/1500/-20 Powerlimit

R9-390s are very easy to overclock and undervolt.... but its a hungry power hogger.

Thank you soo much. i try it.

[ruevers]

Hi,

in first boot and update to v1091, my console show message

noname
R 1091
OFFLINE(1)
No screen session found.


and not possible boot.

i have a r7 360

[realter]

Hi,

in first boot and update to v1091, my console show message

noname
R 1091
OFFLINE(1)
No screen session found.


and not possible boot.

i have a r7 360

You must config wallet and clock setting to you rig

[ruevers]

this is ok.

[korsarz]

Hi,

could any1 help me with connect  to this pool?

https://etc.pool.zet-tech.eu/#/

I am trying

 -wd 1 -r 1 -epool etc.pool.zet-tech.eu:8888 -ewal wallet.xxx -esm 0 -epsw x -allpools 1 -mport -3333

-wd 1 -r 1 -epool http://etc.pool.zet-tech.eu:8888 -ewal wallet.xxx -esm 0 -epsw x -allpools 1 -mport -3333

-wd 1 -r 1 -epool etc.pool.zet-tech.eu:8888 -ewal wallet/xxx -esm 0 -epsw x -allpools 1 -mport -3333

and so on, and nothing works ):

[citronick]

Hi,

could any1 help me with connect  to this pool?

https://etc.pool.zet-tech.eu/#/

I am trying

 -wd 1 -r 1 -epool etc.pool.zet-tech.eu:8888 -ewal wallet.xxx -esm 0 -epsw x -allpools 1 -mport -3333

-wd 1 -r 1 -epool http://etc.pool.zet-tech.eu:8888 -ewal wallet.xxx -esm 0 -epsw x -allpools 1 -mport -3333

-wd 1 -r 1 -epool etc.pool.zet-tech.eu:8888 -ewal wallet/xxx -esm 0 -epsw x -allpools 1 -mport -3333

and so on, and nothing works ):

-allcoins 1 ?

[korsarz]

 -wd 1 -r 1 -epool etc.pool.zet-tech.eu:8888 -ewal wallet.xxx -esm 0 -epsw x -allpools 1 -allcoins 1 -mport -3333

??