EWBF's CUDA Zcash miner

[sublimus]

My GPUs crash often with code 4 and code 6, what does this mean? how can I fix it?

Which driver version?
Do yo play any games on that rig?

[1715045510]

1715045510

[1715045510]

1715045510

[Psynthax]

Latest.. yes but not when mining..

I switched PSU and from that point my GPUs seems to crash :/

[valsens]

hi...does have the option to adjust intensity (-i) ?

[Newuser16]

I don't if this was mentioned here but with 1080 ti power limit ~ 75% = 155W i get 577 Sol/s which is effecincy of 3.65Sol/w ..i guess this is the best mining tool vs Watt consumption (at least for me).

Try 60% TDP. They say it will be 3.78 H/w
http://cryptomining-blog.com/8572-looking-for-the-efficiency-sweet-spot-of-gtx-1080-ti/

Could you please share all of your settings?

[nicofourie]

Has anyone else noticed that v0.3.3b is a lot more volatile than 0.3.2?
On 0.3.2 my minimum and maximum over a 24H period was 216H/s & 373H/s (That is not such a big spread)

Since I started mining on 0.3.3b the fluctuation are lot more. Now my minimum and maximum over a 24H period is much lager at 135H/s & 385H/s, and also jumps a lot more.
This caused my average effective hash-rate to drop by about 20H/s.

I'm using a 1060 to mine.

[CitricAcid]

Has anyone else noticed that v0.3.3b is a lot more volatile than 0.3.2?
On 0.3.2 my minimum and maximum over a 24H period was 216H/s & 373H/s (That is not such a big spread)

Since I started mining on 0.3.3b the fluctuation are lot more. Now my minimum and maximum over a 24H period is much lager at 135H/s & 385H/s, and also jumps a lot more.
This caused my average effective hash-rate to drop by about 20H/s.

I'm using a 1060 to mine.

You have to take into account the difficulty rates of the pool.   Mine have been up and down over the last week

[kopija]

@EWBF

how much did your fee income drop since you introduced --nofee option?

[alucard20724]

Has anyone else noticed that v0.3.3b is a lot more volatile than 0.3.2?
On 0.3.2 my minimum and maximum over a 24H period was 216H/s & 373H/s (That is not such a big spread)

Since I started mining on 0.3.3b the fluctuation are lot more. Now my minimum and maximum over a 24H period is much lager at 135H/s & 385H/s, and also jumps a lot more.
This caused my average effective hash-rate to drop by about 20H/s.

I'm using a 1060 to mine.

putting your minimum and maximum, but stating your average has dropped by a % without stating what your actual average is, is irrelevant data.

What is your Average Speed?  Also... is your 1060 a 3gb or 6gb card?

[EWBF_]

@EWBF

how much did your fee income drop since you introduced --nofee option?

Something  between 10 and 30 percent. It's hard to say for sure, because the price of zcash is very volatile, and people are constantly switching between different coins.

[nicofourie]

@alucard20724 My 1060 is a Asus Strix OC 6Gb.

My avarage when using v0.3.2 is 302H/s, and when using v0.3.3b its around 285H/s.
Needless to say I switched back to v0.3.2.

[lupanar]

Is there solution of issues "Thread exited with code: 46" or "Thread exited with code: 2" ? One of my 1060 is periodically crashes with one of that codes.

[un4given]

Is there solution of issues "Thread exited with code: 46" or "Thread exited with code: 2" ? One of my 1060 is periodically crashes with one of that codes.

you OC'ed too much. play with memory and core settings.

[lupanar]

Is there solution of issues "Thread exited with code: 46" or "Thread exited with code: 2" ? One of my 1060 is periodically crashes with one of that codes.

you OC'ed too much. play with memory and core settings.

Didn't thought that +150/+650 is too much for 1060 card. Thanks, will do it.

[un4given]

Is there solution of issues "Thread exited with code: 46" or "Thread exited with code: 2" ? One of my 1060 is periodically crashes with one of that codes.

you OC'ed too much. play with memory and core settings.

Didn't thought that +150/+650 is too much for 1060 card. Thanks, will do it.

depends on memory quality. 1060 has micron mostly, so not so good for overclocking.

[lupanar]

Is there solution of issues "Thread exited with code: 46" or "Thread exited with code: 2" ? One of my 1060 is periodically crashes with one of that codes.

you OC'ed too much. play with memory and core settings.

Didn't thought that +150/+650 is too much for 1060 card. Thanks, will do it.

depends on memory quality. 1060 has micron mostly, so not so good for overclocking.

Think my Palit Dual have micron memory. Now I'm on +140/+600, let see what it give.

[Biodom]

@alucard20724 My 1060 is a Asus Strix OC 6Gb.

My avarage when using v0.3.2 is 302H/s, and when using v0.3.3b its around 285H/s.
Needless to say I switched back to v0.3.2.

well, 0.3.3b is more stable than 0.3.2 in my system PLUS 0.3.2 heats the risers much more than 0.3.3 (this is less important if your cards are on the mobo).

For me , stability is much more important than about 3% difference as I don't have time to check it every hour.

[murasame2003]

EWBF,

Will it be possible to add another switch under --eexit?
Like, exit the miner if total speed reaches 0 sol/s.

[bughatti]

EWBF,

Will it be possible to add another switch under --eexit?
Like, exit the miner if total speed reaches 0 sol/s.

I second this, I will run for a good 2 days and then start hashing 0.  For me I don't think it is OC issues cause I already had to go down from when I ran 3b.  3b was the most stable at highest clocks.  I dont mind the lower clocks but frustrated with the stability issue so having a command to restart the miner if it reaches 0 would be great.

[EWBF_]

EWBF,

Will it be possible to add another switch under --eexit?
Like, exit the miner if total speed reaches 0 sol/s.

I second this, I will run for a good 2 days and then start hashing 0.  For me I don't think it is OC issues cause I already had to go down from when I ran 3b.  3b was the most stable at highest clocks.  I dont mind the lower clocks but frustrated with the stability issue so having a command to restart the miner if it reaches 0 would be great.

Yes, but i think it's better to fix this. On the side of the pool speed also falls? And can you show the log file?

[ForCrisp]

Pool-X listed it: http://pool-x.eu/gettingstarted