JaredKaragen
Legendary
Offline
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
|
|
June 21, 2017, 06:39:51 PM |
|
Does the unpaid balance ever get caught up? Im up to 0.137BTC on unpaid over the week, but my balance to be paid out today is only up to 0.0211 so far today...seems like my unpaid balance is growing daily, while my balance to be paid is staying steady around $10/gpu.... little concerned
that is a total unpaid balance for the last 3 days. cause netko takes over 2.5 days to confirm now. yeah, you need to know if your mining long-confirm coins... also; maybe people aren't buying what was mostly mined ATM? Pay attention to the graph. You'll see the lower green full graph emulate what the top thin (blue?) line was when the coins were minted; with the difference in the green graph at the time block is found... ITs a lot easier to judge on coins less than 12Hours maturity to sale.... Crackfoo: Can you add the ability to see your payout graph in multiple scales with a dropdown box? I.E. 12Hr, 24Hr, 48Hr, 7 Days, 30 days. Would be nice to see the sawtooth patterns and profitability across more time span.
|
|
|
|
crackfoo (OP)
Legendary
Offline
Activity: 3556
Merit: 1126
|
|
June 22, 2017, 12:22:34 AM |
|
You can now see the FlexFee™ thresholds on the pools hashrate graphs. For algo that are FlexFee™ enabled, there will be extra horizontal lines indicating the next drop in fees. Just hover on the line.
|
ZPOOL - the miners multipool! Support We pay 10 FLUX Parallel Assets (PA) directly to block rewards! Get paid more and faster. No PA fee's or waiting around for them, paid instantly on every block found!
|
|
|
icolsuineg
|
|
June 22, 2017, 04:47:54 PM |
|
I have 22-25% rejects on miner with equihash, using claymore on amd, it started when ZEN was added to the pool, anyone experiencing same problems?
I also get a lot of rejects (actually the graph just fills) with Alexis miner and moved to other algos. Tried the setup on nicehash and didn't get a single reject.
|
♦♦♦ CRYPTUMCOIN ♦♦♦ Miner and trade-centric Equihash-based cryptocurrency
|
|
|
crackfoo (OP)
Legendary
Offline
Activity: 3556
Merit: 1126
|
|
June 22, 2017, 06:44:43 PM |
|
I have 22-25% rejects on miner with equihash, using claymore on amd, it started when ZEN was added to the pool, anyone experiencing same problems?
I also get a lot of rejects (actually the graph just fills) with Alexis miner and moved to other algos. Tried the setup on nicehash and didn't get a single reject. yeah I use nicehash as well and no rejects. Not sure if this is something that can be fixed poolside... https://pasteboard.co/jZAzzqwS.png
|
ZPOOL - the miners multipool! Support We pay 10 FLUX Parallel Assets (PA) directly to block rewards! Get paid more and faster. No PA fee's or waiting around for them, paid instantly on every block found!
|
|
|
crackfoo (OP)
Legendary
Offline
Activity: 3556
Merit: 1126
|
|
June 22, 2017, 06:48:07 PM |
|
Crackfoo:
Can you add the ability to see your payout graph in multiple scales with a dropdown box?
I.E. 12Hr, 24Hr, 48Hr, 7 Days, 30 days.
Would be nice to see the sawtooth patterns and profitability across more time span.
I'll see if it can be done. I'm really bad at trying to figure out jqplot
|
ZPOOL - the miners multipool! Support We pay 10 FLUX Parallel Assets (PA) directly to block rewards! Get paid more and faster. No PA fee's or waiting around for them, paid instantly on every block found!
|
|
|
Storx
|
|
June 22, 2017, 07:43:57 PM |
|
i am still getting a lot of random periods of rejects on groestl algo....like day 3 of it happening randomly, its the same on multiple rigs
|
- GPUs Mining : 128 (Updated 3/7/18) // CPUs Mining : 19 (Updated 2/23/18)
|
|
|
dragonmike
|
|
June 22, 2017, 10:22:35 PM |
|
Just for my understanding... Are we saying it's a bad idea to set autoexchange currency to BTC because it costs more in transfer fees?
If I did set my payout currency to, say, DGB, would that not imply more transaction fees as the pool would have to square the balances against a large currency first before exchanging them to DGB?
|
|
|
|
Jaerin
|
|
June 23, 2017, 12:52:28 AM |
|
Just for my understanding... Are we saying it's a bad idea to set autoexchange currency to BTC because it costs more in transfer fees?
If I did set my payout currency to, say, DGB, would that not imply more transaction fees as the pool would have to square the balances against a large currency first before exchanging them to DGB?
No I was mistaken. The pool pays the transfer fees on payout.
|
|
|
|
Jaerin
|
|
June 23, 2017, 03:39:47 AM |
|
Looks like Electra updated their wallet to try and resolve their blockchain issue. Any plans to try and recover something from it?
|
|
|
|
icolsuineg
|
|
June 23, 2017, 10:04:51 AM |
|
I have 22-25% rejects on miner with equihash, using claymore on amd, it started when ZEN was added to the pool, anyone experiencing same problems?
I also get a lot of rejects (actually the graph just fills) with Alexis miner and moved to other algos. Tried the setup on nicehash and didn't get a single reject. yeah I use nicehash as well and no rejects. Not sure if this is something that can be fixed poolside... https://pasteboard.co/jZAzzqwS.pngWell, I'm talking like95% rejects on some of the workers. As it happened when you were adding Zen and it appeared to be fixed, I left some of the workers on equihash, but then it climbed again. I'll try again and give you screenshot so you can see the time too.
|
♦♦♦ CRYPTUMCOIN ♦♦♦ Miner and trade-centric Equihash-based cryptocurrency
|
|
|
minerx117
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
June 23, 2017, 10:28:54 AM |
|
hi crackfoo is hmq1725 algud at your end reporting very low hash rate on pool..
Regards Nemo
|
NemosMiner-v3.8.1.3
|
|
|
guytechie
|
|
June 23, 2017, 12:26:30 PM |
|
hi crackfoo is hmq1725 algud at your end reporting very low hash rate on pool..
Regards Nemo
I see the same thing. Miner says 15.4 MH/s (2x GTX 1080 Ti) but pool says 112 kh/s.
|
Put something in my tip jar if I made your day. BTC: 1MkmBHDjonAFXui6JEx9ZmEemfMtUo9Cmu
|
|
|
shotgun1969
|
|
June 23, 2017, 01:01:09 PM |
|
hi crackfoo is hmq1725 algud at your end reporting very low hash rate on pool..
Regards Nemo
i had the same issue. investigating it i found that my miners were stuck in a low dif stratum roll and couldnt put in anything but a whole bunch of tiny stratum shares like blake2s was doing. i have been watching it and 129 miners and only 79 mhs means to me like its doing it to a lot of miners.
|
|
|
|
crackfoo (OP)
Legendary
Offline
Activity: 3556
Merit: 1126
|
|
June 23, 2017, 02:32:53 PM |
|
I'm away travelling until Sunday. Will try and give the hmq stratum a bump and see it that improves.
|
ZPOOL - the miners multipool! Support We pay 10 FLUX Parallel Assets (PA) directly to block rewards! Get paid more and faster. No PA fee's or waiting around for them, paid instantly on every block found!
|
|
|
guytechie
|
|
June 23, 2017, 02:53:12 PM |
|
Can you include some kind of tutorial on how to set the profitability factors on your website? Most people won't find the info in this thread since it's so huge now. https://bitcointalk.org/index.php?topic=1751272.msg19010061#msg19010061Would go great in your "Links" section, which already include useful stuff like API, Difficulty, Benchmarks, and Algo Switching. A section on "how to set profitability factors" would be nice. Thanks.
|
Put something in my tip jar if I made your day. BTC: 1MkmBHDjonAFXui6JEx9ZmEemfMtUo9Cmu
|
|
|
crackfoo (OP)
Legendary
Offline
Activity: 3556
Merit: 1126
|
|
June 23, 2017, 03:07:49 PM |
|
Can you include some kind of tutorial on how to set the profitability factors on your website? Most people won't find the info in this thread since it's so huge now. https://bitcointalk.org/index.php?topic=1751272.msg19010061#msg19010061Would go great in your "Links" section, which already include useful stuff like API, Difficulty, Benchmarks, and Algo Switching. A section on "how to set profitability factors" would be nice. Thanks. SOMe day I guess but it's been mentioned and discussed in this thread a few times now...
|
ZPOOL - the miners multipool! Support We pay 10 FLUX Parallel Assets (PA) directly to block rewards! Get paid more and faster. No PA fee's or waiting around for them, paid instantly on every block found!
|
|
|
guytechie
|
|
June 23, 2017, 03:44:47 PM |
|
Can you include some kind of tutorial on how to set the profitability factors on your website? Most people won't find the info in this thread since it's so huge now. https://bitcointalk.org/index.php?topic=1751272.msg19010061#msg19010061Would go great in your "Links" section, which already include useful stuff like API, Difficulty, Benchmarks, and Algo Switching. A section on "how to set profitability factors" would be nice. Thanks. SOMe day I guess but it's been mentioned and discussed in this thread a few times now... Correct. That's precisely the problem - it's been discussed in this thread a few times, making it hard to search for the info. I've been mining at zpool for a while now, and only now do I have a slight idea on how to implement it based on the info spread all over this thread. https://bitcointalk.org/index.php?topic=1751272.msg19009771#msg19009771https://bitcointalk.org/index.php?topic=1751272.msg17921405#msg17921405https://bitcointalk.org/index.php?topic=1777336.msg17729122 (Actually Nemo's scripts is a good place to look at how/why it's done). https://bitcointalk.org/index.php?topic=1260863.msg15119470#msg15119470 (Jared's script as well). https://bitcointalk.org/index.php?topic=1260863.msg15933612#msg15933612Also I noticed a ",stats" in the password field. I haven't seen this documented anywhere. Just guessing, but does that send statistic info (miner used, version, speed, etc) to your pool? Lots of hidden gems that need to be documented somewhere. This is a nice pool, but it's not the easiest to figure out for anything but just point-and-mine.
|
Put something in my tip jar if I made your day. BTC: 1MkmBHDjonAFXui6JEx9ZmEemfMtUo9Cmu
|
|
|
guytechie
|
|
June 23, 2017, 04:11:01 PM |
|
Crackfoo, if you want, you can just copy paste this to your site so you don't have to worry about typing up a whole essay yourself.
Anyone can format it, give credit, make corrections, etc.
The Profitability Factor (PF) is used to determine which is the best algo to mine for profitability based on your hardware. You can think of the PF as the speed at which your particular miner can mine. This will let the pool decide what is the most profitable algo to mine for you.
This helps because what's profitable for an AMD GPU may not be profitable for a nVidia GPU (and vice versa).
Here's what you need to keep in mind when determining your PF numbers: PF numbers are in MH/s for most algos. For SHA256 and blake algos, they are in GH/s. For equihash, it's kSol/s
How to determine your PF number: Use whatever miner, options, arguments, syntax (etc) you normally would for each algo. Example: ccminer -r 0 -a x13 -i 17.5 -o stratum+tcp://x13.mine.zpool.ca:3633 -u 1MkmBHDjonAFXui6JEx9ZmEemfMtUo9Cmu -p c=BTC,x13
Mine for a few minutes so the miner can get up to a stable speed. This speed is what you will use for your PF number.
You will have to repeat this for each algo you wish to mine.
Some PF numbers determined by JaredKaragen:
GTX 750Ti x17=1.8 nist5=8.5 x11evo=2.7 sib=0.725 x13=2.3 x14=2.14 x15=1.8 x11=2.7 qubit=4.2 lyra2v2=6.2 blakecoin=1.4 blake2s=0.89 neoscrypt=0.155 decred=0.475 skein=73.5 lbry=44.2 c11=2.74 quark=5.0
GTX 980 x17=5.2 nist5=8.0 x11evo=7.7 sib=1.1 x13=6.8 x14=7.0 x15=5.6 x11=8.2 qubit=12.5 lyra2v2=22.0 blakecoin=1.4 blake2s=1.2 neoscrypt=0.651 decred=1.7 skein=293.0 lbry=157.0 c11=8.3 groestl=24.5 quark=11.5
GTX 1070 FTW DT 8G x17=7.7 ccminer 1.7 nist5=41.9 ccminer 1.8-dev x11evo=11.8 ccminer 1.8-dev sib=1.7 ccminer 1.8-dev x13=10.3 1.5.74-git(SP-MOD) x14=9.6 ccminer 1.7 x15=8.2 ccminer 1.8.dev x11=12.1 ccminer 1.8.dev qubit=18.5 ccminer 1.8.dev lyra2v2=37.2 ccminer 1.7.6 blakecoin=4.1 ccminer 1.8.dev blake2s=1.7 ccminer 1.7.6 neoscrypt=0.922 ccminer 1.8.3 decred=2.2 skein=400.0 lbry=270.0 c11=12.74 groestl=37.1 quark=18.4 keccak=550.0 ccminer 1.7.6 myr-gr=55.9 ccminer 1.7
As you can see, depending on the make/model, factory overclock, your own over/under clock/voltage, temperatures, and even the specific miner program and version, your speed can be wildly different. This is why you could better fine tune the PF numbers yourself.
|
Put something in my tip jar if I made your day. BTC: 1MkmBHDjonAFXui6JEx9ZmEemfMtUo9Cmu
|
|
|
Jaerin
|
|
June 23, 2017, 04:25:47 PM |
|
Also I noticed a ",stats" in the password field. I haven't seen this documented anywhere. Just guessing, but does that send statistic info (miner used, version, speed, etc) to your pool?
Lots of hidden gems that need to be documented somewhere. This is a nice pool, but it's not the easiest to figure out for anything but just point-and-mine.
Stats is documented here: http://zpool.ca/site/benchmarksWhich the benchmarks at the top can also be used to get a decent profitability factor for the multialgo by looking up your GPU type and seeing what miner the person used and what hash rate they were getting. Ultimately though you'd want to do your own benchmarking. Ultimately though I wouldn't recommend anyone do Multi-algo unless they understand the concepts that affect all mining. There is a lot of tinkering and fiddling that goes with getting it working well. Things that are going to be unique to your setup and people aren't always going to have a clear and concise answer on how to fix the problems that you might be seeing.
|
|
|
|
guytechie
|
|
June 23, 2017, 04:47:48 PM |
|
Stats is documented here: http://zpool.ca/site/benchmarksWhich the benchmarks at the top can also be used to get a decent profitability factor for the multialgo by looking up your GPU type and seeing what miner the person used and what hash rate they were getting. Ultimately though you'd want to do your own benchmarking. Ultimately though I wouldn't recommend anyone do Multi-algo unless they understand the concepts that affect all mining. There is a lot of tinkering and fiddling that goes with getting it working well. Things that are going to be unique to your setup and people aren't always going to have a clear and concise answer on how to fix the problems that you might be seeing. Ah, thanks for the info on stats. And finding info on the PF is one of the steps to take in understanding the concepts. I've been mining for a while without knowing this info, but now I want to know more - learn to do better. In order to tinker and fiddle, I wanted to understand how to set those PFs. Now I do, and I want to share that info. The problem is it seems a few do know and have info (like this) in this thread somewhere. Then it gets burried. Search may or may not unearth it, depending on the search terms you use. Since the pool owner has a nice area where advanced info is posted on his website, I'd say please include info on the PF. I'd even say it makes a good subsection of the Multi-Algo switching area, where you already have the bench and stats info (because this is what you need to determine your PF anyways).
|
Put something in my tip jar if I made your day. BTC: 1MkmBHDjonAFXui6JEx9ZmEemfMtUo9Cmu
|
|
|
|