minerstat: mining OS + ASIC monitoring + Windows mining

[coinscrow]

I just found this thread for the the first time and it looks pretty neat. I am in the process in building up and stabilizing my first PC and I currently I am looking around where to impove. When the optimal format is found I'll upscale. For now I do have some questions and I hope someone could answer;

1) Has anyone mined at both nicehash and this one. What was the difference in results for you?

2) WattTool Profile Manager; This was not really clear for me. can you set a profile per card per coin and when coins are being switched it also changes WattTool settings? (or is that not needed? I am a rookie regarding WattTool, I have a lot to learn  )

3) Does it auto calculate your hashrate per coin like nicehash can do with the benchmark feature?

Thanks in advance! This all looks awesome.

1) This one? I have currently no pool, or sell/buy hashpower. (Soon)
2) WattTool works only with RX 400 Series GPUS. Auto Load GPU profiles, / coin / gpu.
3) I will make a benchmark, now you can manual put your hashrate and consumption to website.

Thanks for the swift reply!

1) Sorry for being unclear. What I am curious about is the profitability difference between using nicehash or mining coins trough your tool (regardless of nicehash is actually renting out hashpower instead of mining coins for yourself)

2) great, fits nicely with my 480's

3) neat, that would save a lot of hassle.. where is it positioned on your roadmap?

i don't know i never tried nicehash. when i finish algo, more coins more miners. can be the most profitable.

maybe in 1-2 week

[1714143135]

1714143135

[1714143135]

1714143135

[1714143135]

1714143135

[1714143135]

1714143135

[coinscrow]

- I just improved ewbf-zec sync time, no more log file! reduced to 1min. (website stats updated every minute)
- CCminer upgraded to 2.0 ( I will add all algo support)

BUG CONFIRMED ewbf-zec (v2.6 some reason in come causes don't sync) Please use v2.5 until v2.7 is released.

[Jamievs]

Great! Do I need to create wallets for all the coins myself before I start mining? I see all of them are prefilled and it is not clear for me what to do there.

[coinscrow]

Great! Do I need to create wallets for all the coins myself before I start mining? I see all of them are prefilled and it is not clear for me what to do there.

That's for the algo, you can pre-fill them.
Use the Config Editor, replace addresses for your workers. Thats all

[Jamievs]

Great! Do I need to create wallets for all the coins myself before I start mining? I see all of them are prefilled and it is not clear for me what to do there.

That's for the algo, you can pre-fill them.
Use the Config Editor, replace addresses for your workers. Thats all

Sorry man, English is not my main language so just to be sure; Do I make wallets for each coin and add the wallet on this page https://minerstat.xyz/addresseditor.html and is this where the mined coins are payed to?

Just to add; everything seems pretty neat and cool but also kinda overwhelming for when you're new to the tool!

[coinscrow]

Great! Do I need to create wallets for all the coins myself before I start mining? I see all of them are prefilled and it is not clear for me what to do there.

That's for the algo, you can pre-fill them.
Use the Config Editor, replace addresses for your workers. Thats all

Sorry man, English is not my main language so just to be sure; Do I make wallets for each coin and add the wallet on this page https://minerstat.xyz/addresseditor.html and is this where the mined coins are payed to?

https://minerstat.xyz/config.html Edit addresses here too. But yes put all address here. https://minerstat.xyz/addresseditor.html
1-2 weeks the app only will use these settings.

[coinscrow]

v2.7 IS HERE!

UPDATE: If you use coin algo, please re-download. I fixed an alias bug. claymore-ubq don't started when it was the most profitable. But auto switch worked perfect.

CHANGELOG

Code:

- Corrects an issue when ccminer don’t report offline status to website.
- Corrects an issue when ewbf-zec don’t sync or sent big  packages. (mb instead of bytes)
- Corrects all issue when watchdog won’t work correct with Nvidia miners
- Corrects an issue when Network traffic showed 0 kilobyte. 
- ewbf-zec sync time reduced to 60 seconds.
- ccminer-tpruvot updated to 2.0 RC
- When no internet access, the node wait for connection than restart itself.
- Node maximum instances set to 2 (2 Worker at 1 Rig) -> check Readme
- Editable Claymore -mport (for sync) -> check Readme
- Few minor bug fixed, stability improvements.

You can run 2 worker at same time on 1 rig. How?

Code:

Copy node two different folder like:
node_1 
node_2

After Edit config.txt to
node_1 WORKER - WORKERNAME1
node_2 mport.txt - WORKERNAME2
..... 

After Edit mport.txt to
node_1 mport.txt - 3333
node_2 mport.txt - 3334

Set Minerstat.xyz - Config Editor to all claymore miner config. /worker
-mport 3333
-mport 3334

Variations:
claymore-claymore
claymore-ewbf
claymore-ccminer
claymore-optiminer
claymore-sgminer
claymore-gatelessgate

Whats next?
- Better Nvidia Support
- Improved Algorithm
and much more..

AutoUpdate: A button on the node, Or Send AutoUpdate command from the Website Remote Management.

[olaf_d]

Awesome update!!! I have been waiting for 2 workers on 1 rig!

You're awesome @coinscrow!

Now if you can get it to work without having to use an extra worker name 

[coinscrow]

Awesome update!!! I have been waiting for 2 workers on 1 rig!

You're awesome @coinscrow!

Now if you can get it to work without having to use an extra worker name  

I want it first like dual-mining an extra row. but, if you already dual-mining another extra row rrgg..
now it's simplier, but if i have any better idea, i will make it.

[cissrawk]

looks good, i will try it

[coinscrow]

v2.7 UPDATE: If you use coin algo, please re-download. I fixed an alias bug. claymore-ubq don't started when it was the most profitable. But auto switch worked perfect.

[cryptominer420]

Looking good so far, will let you know if I find any bugs.

[magnoman]

Awesome job on 2.7.  NVIDIA mining is much more reliable.  I'm looking forward to profit switching feature.  The difficulties of the coins have been changing so much lately it's a chore to stay on top of it manually.

[bel123]

awosome job!

Will you plan to make Linux Client also?

[coinscrow]

awosome job!

Will you plan to make Linux Client also?

yes, linux client and linux OS.

[coinscrow]

I started to work on a FAQ, to new users.

https://minerstat.xyz/faq.html

Help me, what questions or categories should i describe how to use my application.

[cryptominer420]

Quick things to change for propper english.

Current: How Much cost to use this service?
New: How much does the service cost?

Current: How Much Secure is it?
New: How Secure is it?

Then capitalize from i to I.

I know they are small changes but I will get some more info later.

Also Function request
A check box to enable and disable coins that you don't want to auto switch to (ETH,ETC,Music,UBQ,EXP,ETC) Should be a option for all supported coins.

Example: I do not want to mine Music, EXP, KMD, PASL, XMR, ZDASH, or SC.

[Tidsdilatation]

Are you going to add the Nicehash miner? Looking good! Will use if you do

[Kompik]

Is it possible to add my own miners? For example the sp-mod5 is much faster for lbry than the ccminer. Can I do it by replacing the folder and renaming it? Will it be buggy?

[gmx2000]

Is there a way to always mine ETH instead having to mine the most profitable coin between ETH/ETC/EXP/UBQ/MUSIC?