[1500 TH] p2pool: Decentralized, DoS-resistant, Hop-Proof pool

[stevegee58]

2013-04-14 08:40:17.905458 > >>> Warning: (from bitcoind) Warning: this version is obsolete, upgrade required

Here's your problem.

M

Even if i am using it to LTC ?

Well then what version of Litecoin client are you using?  Is it possible you're somehow connecting to the Bitcoin client instead?

[kalner123456]

Hi, I setup p2pool for my self to mine on, and I am using cgminer to mine on it. However when I start doing so, cgminer says it is finding shares but it does not show up on the p2pool screen. And when I connect to 127.0.0.1:9332 on my browser, it also says I have no shares, and my payout will be 0 BTC. Can someone help me?

[lenny_]

WISHLIST:

Right now, when bitcoind dies, p2pool continue working and is still sending work to connected miners. All miners connected to node with dead bitcoind, will generate 100% DOA shares.

My suggestion is to make a change:
When p2pool detects that bitcoind is dead, it should not only write a warnings on webUI and in the log, it should disconnect all connected miners immediately, with 403 Forbidden or something, so they can connect to other, backup pool.

[stevegee58]

Hi, I setup p2pool for my self to mine on, and I am using cgminer to mine on it. However when I start doing so, cgminer says it is finding shares but it does not show up on the p2pool screen. And when I connect to 127.0.0.1:9332 on my browser, it also says I have no shares, and my payout will be 0 BTC. Can someone help me?

You have to wait and be patient.  Connect to your p2pool instance using your web browser and look at the data.  If the local hash rate > 0 then you're good to go.  p2pool shares are solved at a much lower rate than your cgminer shares.  Depending on your hash rate it could take hours.

[kalner123456]

Hi, I setup p2pool for my self to mine on, and I am using cgminer to mine on it. However when I start doing so, cgminer says it is finding shares but it does not show up on the p2pool screen. And when I connect to 127.0.0.1:9332 on my browser, it also says I have no shares, and my payout will be 0 BTC. Can someone help me?

You have to wait and be patient.  Connect to your p2pool instance using your web browser and look at the data.  If the local hash rate > 0 then you're good to go.  p2pool shares are solved at a much lower rate than your cgminer shares.  Depending on your hash rate it could take hours.

ok, thanks.

[zvs]

Hi, I setup p2pool for my self to mine on, and I am using cgminer to mine on it. However when I start doing so, cgminer says it is finding shares but it does not show up on the p2pool screen. And when I connect to 127.0.0.1:9332 on my browser, it also says I have no shares, and my payout will be 0 BTC. Can someone help me?

in the log file or on your website you can look at the last share & see what the difficulty level is at the moment (approximately anyway, the logfile would tell you exactly w/ the new work)

right now it's 793.5697319853241

[Richy_T]

Sweet little overnight bonus last night

[lenny_]

WISHLIST:

Right now, when bitcoind dies, p2pool continue working and is still sending work to connected miners. All miners connected to node with dead bitcoind, will generate 100% DOA shares.

My suggestion is to make a change:
When p2pool detects that bitcoind is dead, it should not only write a warnings on webUI and in the log, it should disconnect all connected miners immediately, with 403 Forbidden or something, so they can connect to other, backup pool.

Can anyone look into this,please? 

[gyverlb]

WISHLIST:

Right now, when bitcoind dies, p2pool continue working and is still sending work to connected miners. All miners connected to node with dead bitcoind, will generate 100% DOA shares.

My suggestion is to make a change:
When p2pool detects that bitcoind is dead, it should not only write a warnings on webUI and in the log, it should disconnect all connected miners immediately, with 403 Forbidden or something, so they can connect to other, backup pool.

Can anyone look into this,please? 

In fact in an ideal world any communication problem detected in p2pool (be it with bitcoind, with other nodes are even reported to P2Pool by bitcoind) should trigger this kind of behavior so that miners have the opportunity to look for a backup pool which might not be affected by the same problems.

[Richy_T]

Really rocking it today. Woot!

time	number	hash/explorer link
Mon Apr 15 2013 14:58:30 GMT-0500 (Central Daylight Time)	231515	00000000000001c54072f301f89bd4f9800a17e7c1e4f7b98d98e610f80b11cd
Mon Apr 15 2013 11:32:06 GMT-0500 (Central Daylight Time)	231483	000000000000007398b4d505f2da8de17ad3c7485a50321b91fd01f8b031bba9
Mon Apr 15 2013 02:26:29 GMT-0500 (Central Daylight Time)	231433	000000000000004638d24e4a1d1e1b2fb497017eb79353e90142a032323cb48c
Mon Apr 15 2013 01:51:39 GMT-0500 (Central Daylight Time)	231428	00000000000001a116e700eabd93e670223548819b79a10975590b03d0b3b569

[wacko]

How come that I sometimes receive my share from a new block (mining LTC with local p2pool 11.3) in my wallet, but that block is not listed in the pool's statistics? Just today, the latest blocks were found at (UTC time) 16:02, 16:59, 18:04, 21:33, and then there's 22:50, but in my wallet there's also ~ 1 LTC mined from 22:04 (Transaction ID: b8921528d4ae00f32f05890af58b981b88f373d4ac7c17275fd22b29c20423e0). The same thing happened a couple of days ago. Sometimes I get a feeling that there's something wrong, like it takes p2pool too long to find a block.. just a couple of days ago there was a ~6 hours period without a block found, I was running p2pool 11.2 and that made me search for updates, found 11.3 and started using it, all was fine but then again this "missing" block from 22:04...

Is there a place I can see the history of LTC blocks found other than my local 127.0.0.1:9327/static/? There's p2pool.info, but it only shows BTC blocks found...

[stevegee58]

I noticed this odd behavior using p2pool/LTC too.  cgminer is happily hashing away but I'm no longer being paid.

I've stopped mining entirely anyway while waiting for my ASIC.

[zvs]

Hi All,

   Im trying to set p2pool server but it seems that it is not working at all....  Shares and Payout always set to 0.
   Am i missing something ? Ideas?

p2pool log:

013-04-14 08:40:17.904862 > ########################################
2013-04-14 08:40:17.905458 > >>> Warning: (from bitcoind) Warning: this version is obsolete, upgrade required
2013-04-14 08:40:17.905888 > ########################################
2013-04-14 08:40:17.906335 P2Pool: 17333 shares in chain (8687 verified/17334 total) Peers: 6 (0 incoming)
2013-04-14 08:40:17.906670  Local: 103kH/s in last 4.6 minutes Local dead on arrival: ~2.7% (1-5%) Expected time to share: 8.4 hours
2013-04-14 08:40:17.908512  Shares: 0 (0 orphan, 0 dead) Stale rate: Efficiency: Current payout: 0.0000 LTC
2013-04-14 08:40:17.908934  Pool: 389MH/s Stale rate: 21.7% Expected time to block: 54.0 minutes

i tried setting it up with litecoin just for kicks and get the same thing myself.

04/17/13 00:50:31 received block cf325cc26a3570e6338c
04/17/13 00:50:31 SetBestChain: new best=cf325cc26a3570e6338c  height=335883  work=26545242345195032  date=04/17/13 00:50:23
04/17/13 00:50:31 SetBestChain: 46 of last 100 blocks above version 1
04/17/13 00:50:31 ProcessBlock: ACCEPTED

this is what causes it in the litecoin src

    // Check the version of the last 100 blocks to see if we need to upgrade:
    if (!fIsInitialDownload)
    {
        int nUpgraded = 0;
        const CBlockIndex* pindex = pindexBest;
        for (int i = 0; i < 100 && pindex != NULL; i++)
        {
            if (pindex->nVersion > CBlock::CURRENT_VERSION)
                ++nUpgraded;
            pindex = pindex->pprev;
        }
        if (nUpgraded > 0)
            printf("SetBestChain: %d of last 100 blocks above version %d\n", nUpgraded, CBlock::CURRENT_VERSION);
        if (nUpgraded > 100/2)
            // strMiscWarning is read by GetWarnings(), called by Qt and the JSON-RPC code to warn the user:
            strMiscWarning = _("Warning: this version is obsolete, upgrade required");
    }


so, it's shooting that off since nUpgraded > 50

i'm running the latest version of litecoind

i edited that part out of src

[Xenotron]

After continuously stopping mining due to DDOS attacks, I have decided to mine on this pool.
It was relatively hard to configure everything, but now I don't care about all these bot-net attacks 

[niteryder]

So, does anyone keep track of the transactions?  I am keeping track with the litecoin p2pool, and I am missing one. 

This is the block:  http://explorer.litecoin.net/block/a14a23d0c3f1763201cce8c099595bd6ea76de03090660babac75f2ed12ad2b8

Shows a payout for me of 0.21356196.  It never showed up in my wallet.

[mdude77]

So, does anyone keep track of the transactions?  I am keeping track with the litecoin p2pool, and I am missing one. 

This is the block:  http://explorer.litecoin.net/block/a14a23d0c3f1763201cce8c099595bd6ea76de03090660babac75f2ed12ad2b8

Shows a payout for me of 0.21356196.  It never showed up in my wallet.

Try litecoind, or whatever it's called, -rescan.

M

[calonew]

Hey all, I need some help from someone having more experience with p2pool ...
I try to setup a p2pool node for terracoin mining, using the master branch from https://github.com/forrestv/p2pool

I did start the terracoind daemon and p2pool, but I get the following DNS errors from p2pool:

...
2013-04-18 13:44:09.865605 Joining p2pool network using port 9323...
2013-04-18 13:44:29.891059 > Traceback (most recent call last):
2013-04-18 13:44:29.891293 > Failure: twisted.internet.error.DNSLookupError: DNS lookup failed: address 'seed1.p2pool.terracoin.org' not found: [Errno -3] Temporary failure in name resolution.
2013-04-18 13:44:29.891591 > Traceback (most recent call last):
2013-04-18 13:44:29.891681 > Failure: twisted.internet.error.DNSLookupError: DNS lookup failed: address 'seed2.p2pool.terracoin.org' not found: [Errno -2] Name or service not known.
2013-04-18 13:44:29.891927 > Traceback (most recent call last):
2013-04-18 13:44:29.892013 > Failure: twisted.internet.error.DNSLookupError: DNS lookup failed: address 'forre.st' not found: [Errno -2] Name or service not known.

Please note there are no DNS problems with that machine when running other internet related applications.
Only p2pool reported this issue.

Any idea of what is causing this?
 

[rav3n_pl]

Hey all, I need some help from someone having more experience with p2pool ...
I try to setup a p2pool node for terracoin mining, using the master branch from https://github.com/forrestv/p2pool

I did start the terracoind daemon and p2pool, but I get the following DNS errors from p2pool:

It is connecting to other nodes anyway? Maybe those seeds just are really dead.

[calonew]

Hey all, I need some help from someone having more experience with p2pool ...
I try to setup a p2pool node for terracoin mining, using the master branch from https://github.com/forrestv/p2pool

I did start the terracoind daemon and p2pool, but I get the following DNS errors from p2pool:

It is connecting to other nodes anyway? Maybe those seeds just are really dead.

no, it is NOT connected to any other node!

[rav3n_pl]

Hey all, I need some help from someone having more experience with p2pool ...
I try to setup a p2pool node for terracoin mining, using the master branch from https://github.com/forrestv/p2pool

I did start the terracoind daemon and p2pool, but I get the following DNS errors from p2pool:

It is connecting to other nodes anyway? Maybe those seeds just are really dead.

no, it is NOT connected to any other node!

Edit code and add my node to bootstrap: rav3n.dtdns.net