Bitcoin Forum
November 18, 2017, 09:08:07 AM *
News: Latest stable version of Bitcoin Core: 0.15.1  [Torrent].
 
   Home   Help Search Donate Login Register  
Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 [13] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 ... 284 »
  Print  
Author Topic: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4  (Read 322213 times)
funnyboy027
Jr. Member
*
Offline Offline

Activity: 32


View Profile
May 31, 2017, 03:19:23 AM
 #241

Wow, impressive result, I'm using Windows with EWBF miner but has only 650s per card. I will try to use nvOC and report here, I have 6 cards Gigabyte GeForce® GTX 1080 Ti Gaming OC 11G


How many sols you get with this setting +100cc +900mc 200mv for 1080ti
I currently using +100cc +400cc and get 650 sol, can't increase to +900mc same as yours

What OS are you using?

Note in these photos GPU 0 is an EVGA 1080ti SC and GPU 1 is a Reference EVGA 1080ti; look at the difference in temps and you will understand why its better to go with the After Market models.

Also these have active cooling, 1x server fan behind each card.  I get risers and server fans from: hawkfish007





1510996087
Hero Member
*
Offline Offline

Posts: 1510996087

View Profile Personal Message (Offline)

Ignore
1510996087
Reply with quote  #2

1510996087
Report to moderator
1510996087
Hero Member
*
Offline Offline

Posts: 1510996087

View Profile Personal Message (Offline)

Ignore
1510996087
Reply with quote  #2

1510996087
Report to moderator
1510996087
Hero Member
*
Offline Offline

Posts: 1510996087

View Profile Personal Message (Offline)

Ignore
1510996087
Reply with quote  #2

1510996087
Report to moderator
Coinlancer is Disrupting the Freelance marketplace!
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
VoskCoin
Full Member
***
Offline Offline

Activity: 224


YouTube.com/VoskCoin


View Profile WWW
May 31, 2017, 03:37:15 AM
 #242

Fellow miners,

this is the build I use with my Nvidia 1000 series rigs.  I am providing it to the community 100% free, with no fees (from me at least):
(Claymore's miner still has his fee if you mine ETH or ETC; EWBF defaults to 0 fee: which you can easily change if you want to; EWBF 0.3.3b. is awesome)

Please Note:
I don't have any Maxwell cards, so I didn't test them.  According to Nvidia, the driver should support them as well.  I'm not sure if nvOC (as is) can support Maxwell Cards.

nvOC is a customized Ubuntu 16.04 build with Nvidia individual card OC and individual card powerlimit support, manual fan support, auto launching on boot, and a single easy to configure Bash Script (oneBash) which can be configured from a windows pc using wordpad.

nvOC is easy-to-use and supports mining (with the newest oneBash):

ZEC   ZCL   FTC   LBC   MUSIC   ETC   EXP   ETH   DCR   PASC
DUAL_ETC_DCR       DUAL_ETC_PASC        DUAL_ETC_LBC         DUAL_ETC_SC
DUAL_EXP_DCR       DUAL_EXP_PASC        DUAL_EXP_LBC         DUAL_EXP_SC
DUAL_ETH_DCR       DUAL_ETH_PASC        DUAL_ETH_LBC        DUAL_ETH_SC
DUAL_MUSIC_DCR   DUAL_MUSIC_PASC    DUAL_MUSIC_LBC    DUAL_MUSIC_SC

the newest oneBash Link


NOTE THE LAST VERSION OF ONEBASH WITH DUAL SC PRESETS WAS INCORRECTLY BUILT ( THANKS Roes500 FOR NOTICING ) IF YOU ARE MINING:

DUAL_ETH_SC
DUAL_EXP_SC
DUAL_ETC_SC

ENSURE THAT YOU UPDATE TO THE NEWEST ONEBASH (FIXED MAY-23rd )


nvOC uses EWBF, Claymore, sgminer, and ccminer (both tpruvot and sp-hash) and plusCPU uses cpuminer-opt;
if you want an additional algorithm or mining client post here or pm me the details and I will add it to the next version

DEMO VIDEO Link

Phil's rig DEMO VIDEO Link

Example Rig Link; 1.02$/hash (hash in sol/s) or less

amdOC_Beta_v0010 Link

Current Version: v0014

AS OF MAY 22nd: All images include plusCPU setting to enable cpuminer-opt to mine XMR on the side

Change Log:
v0014
  NOTE: this version is for USB keys only
  added individual card powerlimits
  added manual fan control
  added Guake terminal (press f12 for a standard terminal)
  fixed ccminer libcudart.so.8.0 error
  removed build error logs causing system error messages
  oneBash changes:
    moved oneBash to the Windows partition (you can now configure oneBash on the computer you image the USB key with)

v0013
  dummy plug is no longer required
  added ccminer (both tpruvot and sp-hash)
  added CUDA 8.0
  updated Claymore to 9.0
  installed Ubuntu updates
  oneBash changes:
    moved pool addresses and ports to the top section
    added individual card cc and mc OC
    added 1050 switch (use if you have 1050's in your rig)
    added LBC, DUAL_ETC_PASC  DUAL_ETC_LBC  DUAL_ETH_PASC  DUAL_ETH_LBC

v0012 (initial release)

fully supported motherboard links:

ASRock H81 PRO BTC Link

BIOSTAR TB85 Link

MSI Z270-A PRO (in stock, 6x gpu) Link

GIGABYTE GA-B250M-Gaming 3 (in stock, 4x gpu) Link

BIOSTAR TB250-BTC Link

ASUS Z270-F GAMING (in stock, 7x gpu (only 6x OC)) Link

MSI Z170A GAMING M5 (in stock, 7x gpu (only 6x OC)) Link

ASUS PRIME Z270-A (in stock, 7x gpu (only 6x OC)) Link


How to use:

If you don't have an imaging program already download HDDRawCopy (Link)


for an ASRock H81 PRO BTC or BIOSTAR TB85 use this image

If you are using an ASRock H81 PRO BTC or BIOSTAR TB85; either should work with without any changes to the bios settings. The SHA256 hash (for the zip) is:
Quote
46e53e99edb2bfa654ebd1f2d1fed53df97e41756e88898da3536590981050d8


for a MSI Z270-A PRO use this image

If you are using an MSI Z270-A PRO; ensure you enable Above 4G memory option in the bios before connecting the nvOC USB.  The SHA256 hash (for the zip) is:
Quote
b614211fabb3d94548af0d8046d96fb76336b2474db4da6becc8281c839a0860


for a GIGABYTE GA-B250M-Gaming 3 use this image

If you are using a GIGABYTE GA-B250M-Gaming 3; ensure the Audio Controller is disabled in the bios.  The SHA256 hash (for the zip) is:
Quote
5badbc7d2fbb04f245afab7de5285bfbb3f4e70f93462808ed7f79c317eefd12


for a BIOSTAR TB250-BTC use this image

If you are using a BIOSTAR TB250-BTC; ensure Miner Mode is enabled in the bios.  Also ensure Max TOLUD is set to 3.5 GB in the bios.  The SHA256 hash (for the zip) is:
Quote
14f11d32cd44837e7a46d87eb2369aaf62fb5d2d7e18a1b2136615496ab828aa


for an ASUS Z270-F GAMING use this image

If you are using an ASUS Z270-F GAMING; ensure 'Above 4G Decoding' is enabled in the bios.  Also ensure PTP aware OS: is set to 'Not PTP Aware' in the bios.  Finally, ensure you 'Clear Secure Boot Keys' in the bios.  The SHA256 hash (for the zip) is:
Quote
213e8e1ee423cdfbac786a863394a654b1fe83a4a8138cf5ceb63ab5223bb6f4


for an MSI Z170-A GAMING M5 use this image
Note this mobo requires a skylake CPU: I recommend the G4400
It also requires you to flash the bios

If you are using an MSI Z170-A GAMING M5; ensure 'Above 4G Decoding' is enabled in the bios.  Also download, unzip and copy to a usb key ( the 2016-12-19 Version 1.D ) Bios and follow instructions to flash the bios.  The SHA256 hash (for the zip) is:
Quote
ce540d58ce5f9eb75a361d8564f5b5582db454c754f9b9b3027e08a6663a9c66


for an ASUS PRIME Z270-A  use this image

If you are using an ASUS PRIME Z270-A; ensure 'Above 4G Decoding' is enabled in the bios.  Also ensure PTP aware OS: is set to 'Not PTP Aware' in the bios.  Finally, ensure you 'Clear Secure Boot Keys' in the bios.  The SHA256 hash (for the zip) is:
Quote
67b57b2aca9bf181f7fb4c76333d5d85b3837193a936c3106e34e0736c7aa943


for an ASUS PRIME Z270-A with 1x m2_to_pcie_adapter (total 8x cards: note all OC with this image) use this image
Ensure that you use the m2 adapter in the slot near the CPU

If you are using an ASUS PRIME Z270-A; ensure 'Above 4G Decoding' is enabled in the bios.  Also ensure PTP aware OS: is set to 'Not PTP Aware' in the bios.  Finally, ensure you 'Clear Secure Boot Keys' in the bios.  The SHA256 hash (for the zip) is:
Quote
58da134925d64f01ecd9a9cbbd803936a01361a38ee23770542215815eaea690



ENSURE THAT YOU unzip the image BEFORE YOU IMAGE YOUR USB  Wink


Use HDDRawCopy to image the extracted img file to the 16gb or larger usb ( see this guide for an HDDRawCopy walkthru )

Image to 16gb or larger USB key.  You may have trouble setting the powerlimit if the USB key you use is slow.  You can use any 16gb or larger USB key; however, I highly recommend using the lexar drive as it was one of the fastest USB keys I tested and is less than $8.  

I tested several different USB keys; I recommend using this $8 one:
https://www.amazon.com/Lexar-JumpDrive-16GB-Flash-Drive/dp/B00S5V5PMY

NOTE: You only need to configure the oneBash file in the Windows Partition.  If you don't have a text editor with syntax highlighting: open it with wordpad.  I recommend downloading atom if you don't have a text editor with syntax highlighting .

set COIN, POWERLIMIT, CORE AND MEMORY OC, INDIVIDUAL_CLOCKS, MANUAL_FAN, YOUR ADDRESSES and WORKERS / change POOL and PORT for each COIN if desired

This is the settings portion of oneBash:



direct link to image:
oneBash settings section

When you are done configuring oneBash ensure that you save, then eject the USB.

Attach the USB key to your rig and power it on.

NOTE: first boot will take longer to start mining as oneBash must be converted

All files are in the nvOC folder Link.

nvOC uses the 378.13 Driver.

the root password for nvOC is:

    miner1

Known Limitations and Issues:

If powerlimit isn't setting after editing oneBash on your rig; stop CPU mining ( press f12 to open guake terminal then press ctrl + c to stop the process ) and close the GPU mining process.  Reopen gnome terminal to relaunch oneBash.

v0014 will not support OC on all motherboards without modifications to the xorg.conf file.  I don't have every motherboard so I can't test all of them.  If you have a problem or notice a bug / deficiency please post here or pm me with a description of the problem and the complete specs of your rig.  I can also make you an image that will fully support your motherboard; if I have your motherboard.

Some individual cards may need lower clocks, but in general these are stable OC settings and the powerlimits I use; however, my power is expensive: so you may want to use a higher powerlimit if you have cheap power.

EVGA 1080ti SC              cc 150  mc 900  powerlimit 200
EVGA 1080ti FE              cc 150  mc 900  powerlimit 200
ZOTAC mini 1070's         cc 200  mc 450  powerlimit 125
EVGA FTW 1070's           cc 100  mc 600  powerlimit 118
ZOTAC amp 1060 6gb's   cc 150  mc 600  powerlimit 100
EVGA 1060 SC 6gb's       cc 100  mc 600  powerlimit 100
EVGA 1060 SC 3gb's       cc 100  mc 350  powerlimit 75
EVGA 1050ti SC 4gb's     cc 150  mc 350  powerlimit 53

Depending on the algorithm; you may be able to overclock significantly more.  If your miner crashes at all, it is probably because your cc or mc OC is too high.  

IMO it is easier to start with a lower OC and walk up the OC until it becomes unstable, than to start at the max and walk it down to stability.

If you find nvOC helpful and would like me to expand it; please let me know.  I will make requested changes over time as I am available to.


I am planning to use this board
https://www.newegg.com/Product/Product.aspx?Item=N82E16813128975&cm_re=Z270P-_-13-128-975-_-Product
I would like to use your software, has anyone setup their rig with this board and your software before? I do not see it on the supported OP

What is the opinion on SSD vs USB drive, it makes sense to use a usb for the HD if its fully functional for this setup, however if an SSD is needed that is not an issue however given the choice why not use USB?

Check out my Crypto YouTube channel
https://www.youtube.com/VoskCoin
If you enjoy my content click Subscribe
fullzero
Legendary
*
Offline Offline

Activity: 1092



View Profile
May 31, 2017, 03:50:04 AM
 #243

Wow, impressive result, I'm using Windows with EWBF miner but has only 650s per card. I will try to use nvOC and report here, I have 6 cards Gigabyte GeForce® GTX 1080 Ti Gaming OC 11G


How many sols you get with this setting +100cc +900mc 200mv for 1080ti
I currently using +100cc +400cc and get 650 sol, can't increase to +900mc same as yours

What OS are you using?

Note in these photos GPU 0 is an EVGA 1080ti SC and GPU 1 is a Reference EVGA 1080ti; look at the difference in temps and you will understand why its better to go with the After Market models.

Also these have active cooling, 1x server fan behind each card.  I get risers and server fans from: hawkfish007


Let me know how it goes.

fullzero
Legendary
*
Offline Offline

Activity: 1092



View Profile
May 31, 2017, 04:03:39 AM
 #244

I am planning to use this board
https://www.newegg.com/Product/Product.aspx?Item=N82E16813128975&cm_re=Z270P-_-13-128-975-_-Product
I would like to use your software, has anyone setup their rig with this board and your software before? I do not see it on the supported OP

What is the opinion on SSD vs USB drive, it makes sense to use a usb for the HD if its fully functional for this setup, however if an SSD is needed that is not an issue however given the choice why not use USB?

I will order one of these and make an image for it:  https://www.newegg.com/Product/Product.aspx?Item=N82E16813128975

I understand why members are hesitant to try a USB key, cheap USBs are usually terrible: and fast ones are usually expensive.  

The Lexar drives I recommend are both fast and cheap.  Other members have requested I fully support SSDs again; so I am going to re-add full support for them in a later version.  

Currently you will either need to use manual intervention or make some changes to the system or bash files when using an ssd.

Personally I use all Lexar 16gb USBs with my rigs; except one has a Lexar 32gb I got to test.  I think they are the better choice over a more expensive ssd.

This is my reasoning:

The 16gb Lexar's I recommend are very fast (watch one of the nvOC demo videos if you don't believe me)

are very cheap: $8

are easy to attach to image then remove and reattach to a rig

vs a regular SSD or HDD allow you to use at least one less cable on your rig.

Finally using a usb key allows users to try nvOC without needing to install over their previous OS (no commitment needed).

Although one could use a sata to usb adapter with an ssd, or any type of usb ssd / adapter (there are a lot)  and it would match all the advantages other than cost.  I recommend spending $8 on a Lexar 16gb and seeing if it is fast enough for you; if it is (and most likely it is) then you just saved ~$30 per rig.


VoskCoin
Full Member
***
Offline Offline

Activity: 224


YouTube.com/VoskCoin


View Profile WWW
May 31, 2017, 04:14:28 AM
 #245

I am planning to use this board
https://www.newegg.com/Product/Product.aspx?Item=N82E16813128975&cm_re=Z270P-_-13-128-975-_-Product
I would like to use your software, has anyone setup their rig with this board and your software before? I do not see it on the supported OP

What is the opinion on SSD vs USB drive, it makes sense to use a usb for the HD if its fully functional for this setup, however if an SSD is needed that is not an issue however given the choice why not use USB?

I will order one of these and make an image for it:  https://www.newegg.com/Product/Product.aspx?Item=N82E16813128975

I understand why members are hesitant to try a USB key, cheap USBs are usually terrible: and fast ones are usually expensive. 

The Lexar drives I recommend are both fast and cheap.  Other members have requested I fully support SSDs again; so I am going to re-add full support for them in a later version. 

Currently you will either need to use manual intervention or make some changes to the system or bash files when using an ssd.

Personally I use all Lexar 16gb USBs with my rigs; except one has a Lexar 32gb I got to test.  I think they are the better choice over a more expensive ssd.

This is my reasoning:

The 16gb Lexar's I recommend are very fast (watch one of the nvOC demo videos if you don't believe me)

are very cheap: $8

are easy to attach to image then remove and reattach to a rig

vs a regular SSD or HDD allow you to use at least one less cable on your rig.

Finally using a usb key allows users to try nvOC without needing to install over their previous OS (no commitment needed).

Although one could use a sata to usb adapter with an ssd, or an type of usb ssd / adapter (there are a lot)  and it would match all the advantages other than cost.  I recommend spending $8 on a Lexar 16gb and seeing if it is fast enough for you; if it is (and most likely it is) then you just saved ~$30 per rig.


I would really appreciate that, I just ordered 2x boards to setup Nvidia rigs with

Thank you for the detailed explanation, I am looking forward to trying your software

I will be honest however, I do not have experience using Linux, would you recommend against using your nvOC OS because of that or is there a particular guide/link you'd recommend?

Check out my Crypto YouTube channel
https://www.youtube.com/VoskCoin
If you enjoy my content click Subscribe
fullzero
Legendary
*
Offline Offline

Activity: 1092



View Profile
May 31, 2017, 04:47:24 AM
 #246

I am planning to use this board
https://www.newegg.com/Product/Product.aspx?Item=N82E16813128975&cm_re=Z270P-_-13-128-975-_-Product
I would like to use your software, has anyone setup their rig with this board and your software before? I do not see it on the supported OP

What is the opinion on SSD vs USB drive, it makes sense to use a usb for the HD if its fully functional for this setup, however if an SSD is needed that is not an issue however given the choice why not use USB?

I will order one of these and make an image for it:  https://www.newegg.com/Product/Product.aspx?Item=N82E16813128975

I understand why members are hesitant to try a USB key, cheap USBs are usually terrible: and fast ones are usually expensive. 

The Lexar drives I recommend are both fast and cheap.  Other members have requested I fully support SSDs again; so I am going to re-add full support for them in a later version. 

Currently you will either need to use manual intervention or make some changes to the system or bash files when using an ssd.

Personally I use all Lexar 16gb USBs with my rigs; except one has a Lexar 32gb I got to test.  I think they are the better choice over a more expensive ssd.

This is my reasoning:

The 16gb Lexar's I recommend are very fast (watch one of the nvOC demo videos if you don't believe me)

are very cheap: $8

are easy to attach to image then remove and reattach to a rig

vs a regular SSD or HDD allow you to use at least one less cable on your rig.

Finally using a usb key allows users to try nvOC without needing to install over their previous OS (no commitment needed).

Although one could use a sata to usb adapter with an ssd, or an type of usb ssd / adapter (there are a lot)  and it would match all the advantages other than cost.  I recommend spending $8 on a Lexar 16gb and seeing if it is fast enough for you; if it is (and most likely it is) then you just saved ~$30 per rig.


I would really appreciate that, I just ordered 2x boards to setup Nvidia rigs with

Thank you for the detailed explanation, I am looking forward to trying your software

I will be honest however, I do not have experience using Linux, would you recommend against using your nvOC OS because of that or is there a particular guide/link you'd recommend?

Watch the demo videos I made.  Configuring oneBash will probably be the hardest part, but I think you will be able to do it.  If you have questions, I should be able to answer them.

Also I am reasonably sure that if an ssd is imaged while connected to the build pc with a USB-to-sata adapter and then attached to a rig via the usb-to-sata adapter that it will also work fully with all the current nvOC images.  Not sure why I didn't think of this before.

VoskCoin
Full Member
***
Offline Offline

Activity: 224


YouTube.com/VoskCoin


View Profile WWW
May 31, 2017, 04:49:36 AM
 #247

I am planning to use this board
https://www.newegg.com/Product/Product.aspx?Item=N82E16813128975&cm_re=Z270P-_-13-128-975-_-Product
I would like to use your software, has anyone setup their rig with this board and your software before? I do not see it on the supported OP

What is the opinion on SSD vs USB drive, it makes sense to use a usb for the HD if its fully functional for this setup, however if an SSD is needed that is not an issue however given the choice why not use USB?

I will order one of these and make an image for it:  https://www.newegg.com/Product/Product.aspx?Item=N82E16813128975

I understand why members are hesitant to try a USB key, cheap USBs are usually terrible: and fast ones are usually expensive. 

The Lexar drives I recommend are both fast and cheap.  Other members have requested I fully support SSDs again; so I am going to re-add full support for them in a later version. 

Currently you will either need to use manual intervention or make some changes to the system or bash files when using an ssd.

Personally I use all Lexar 16gb USBs with my rigs; except one has a Lexar 32gb I got to test.  I think they are the better choice over a more expensive ssd.

This is my reasoning:

The 16gb Lexar's I recommend are very fast (watch one of the nvOC demo videos if you don't believe me)

are very cheap: $8

are easy to attach to image then remove and reattach to a rig

vs a regular SSD or HDD allow you to use at least one less cable on your rig.

Finally using a usb key allows users to try nvOC without needing to install over their previous OS (no commitment needed).

Although one could use a sata to usb adapter with an ssd, or an type of usb ssd / adapter (there are a lot)  and it would match all the advantages other than cost.  I recommend spending $8 on a Lexar 16gb and seeing if it is fast enough for you; if it is (and most likely it is) then you just saved ~$30 per rig.


I would really appreciate that, I just ordered 2x boards to setup Nvidia rigs with

Thank you for the detailed explanation, I am looking forward to trying your software

I will be honest however, I do not have experience using Linux, would you recommend against using your nvOC OS because of that or is there a particular guide/link you'd recommend?

Watch the demo videos I made.  Configuring oneBash will probably be the hardest part, but I think you will be able to do it.  If you have questions, I should be able to answer them.

Also I am reasonably sure that if an ssd is imaged while connected to the build pc with a USB-to-sata adapter and then attached to a rig via the usb-to-sata adapter that it will also work fully with all the current nvOC images.  Not sure why I didn't think of this before.

I will order the USB you rec'd and give it a go, especially since you're ordering a https://www.newegg.com/Product/Product.aspx?Item=N82E16813128975&cm_re=Z270P-_-13-128-975-_-Product to create image. I will post video results once I get it operational, I should have all my parts in by the end of next week

Check out my Crypto YouTube channel
https://www.youtube.com/VoskCoin
If you enjoy my content click Subscribe
fullzero
Legendary
*
Offline Offline

Activity: 1092



View Profile
May 31, 2017, 05:06:54 AM
 #248

I am planning to use this board
https://www.newegg.com/Product/Product.aspx?Item=N82E16813128975&cm_re=Z270P-_-13-128-975-_-Product
I would like to use your software, has anyone setup their rig with this board and your software before? I do not see it on the supported OP

What is the opinion on SSD vs USB drive, it makes sense to use a usb for the HD if its fully functional for this setup, however if an SSD is needed that is not an issue however given the choice why not use USB?

I will order one of these and make an image for it:  https://www.newegg.com/Product/Product.aspx?Item=N82E16813128975

I understand why members are hesitant to try a USB key, cheap USBs are usually terrible: and fast ones are usually expensive. 

The Lexar drives I recommend are both fast and cheap.  Other members have requested I fully support SSDs again; so I am going to re-add full support for them in a later version. 

Currently you will either need to use manual intervention or make some changes to the system or bash files when using an ssd.

Personally I use all Lexar 16gb USBs with my rigs; except one has a Lexar 32gb I got to test.  I think they are the better choice over a more expensive ssd.

This is my reasoning:

The 16gb Lexar's I recommend are very fast (watch one of the nvOC demo videos if you don't believe me)

are very cheap: $8

are easy to attach to image then remove and reattach to a rig

vs a regular SSD or HDD allow you to use at least one less cable on your rig.

Finally using a usb key allows users to try nvOC without needing to install over their previous OS (no commitment needed).

Although one could use a sata to usb adapter with an ssd, or an type of usb ssd / adapter (there are a lot)  and it would match all the advantages other than cost.  I recommend spending $8 on a Lexar 16gb and seeing if it is fast enough for you; if it is (and most likely it is) then you just saved ~$30 per rig.


I would really appreciate that, I just ordered 2x boards to setup Nvidia rigs with

Thank you for the detailed explanation, I am looking forward to trying your software

I will be honest however, I do not have experience using Linux, would you recommend against using your nvOC OS because of that or is there a particular guide/link you'd recommend?

Watch the demo videos I made.  Configuring oneBash will probably be the hardest part, but I think you will be able to do it.  If you have questions, I should be able to answer them.

Also I am reasonably sure that if an ssd is imaged while connected to the build pc with a USB-to-sata adapter and then attached to a rig via the usb-to-sata adapter that it will also work fully with all the current nvOC images.  Not sure why I didn't think of this before.

I will order the USB you rec'd and give it a go, especially since you're ordering a https://www.newegg.com/Product/Product.aspx?Item=N82E16813128975&cm_re=Z270P-_-13-128-975-_-Product to create image. I will post video results once I get it operational, I should have all my parts in by the end of next week

Sounds good, let me know if you have any questions.  If I don't answer quickly, its most likely because I am asleep or have turned off notifications to get work done.

funnyboy027
Jr. Member
*
Offline Offline

Activity: 32


View Profile
May 31, 2017, 05:50:33 AM
 #249

In Windows with +150cc, +900mc, 200mv
temperature: 73,
gpu_power_usage: 214,
speed_sps: 671,

bobers
Member
**
Offline Offline

Activity: 64


View Profile
May 31, 2017, 06:55:43 AM
 #250

Hi, can anyone help?
I have same 4 ASUS 1060 3GB, all OC, but one works slowly then others.

ETH: 05/31/17-02:41:36 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 78.055 Mh/s, Total Shares: 7, Rejected: 0, Time: 00:06
ETH: GPU0 17.358 Mh/s, GPU1 20.249 Mh/s, GPU2 20.263 Mh/s, GPU3 20.185 Mh/s
GPU0 t=47C fan=75%, GPU1 t=52C fan=75%, GPU2 t=51C fan=75%, GPU3 t=48C fan=75%
LTCbusiness
Jr. Member
*
Offline Offline

Activity: 51


View Profile
May 31, 2017, 09:50:16 AM
 #251

So here is my lspci

m1@m1-desktop:~$ lspci | grep VGA
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)


and here is my xorg.conf, as I see the busid is matched. I tried to change to value, for example, from 01:00:0 to 01:00.0, but it did not work.


# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 381.09  (buildd@lgw01-19)  Sat Apr  8 10:34:02 UTC 2017

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 378.13  (buildmeister@swio-display-x86-rhel47-05)  Tue Feb  7 19:37:00 PST 2017

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" 1920 0
    Screen      2  "Screen2" 3840 0
    Screen      3  "Screen3" 5760 0
    Screen      4  "Screen4" 7680 0
    Screen      5  "Screen5" 9600 0
    Screen      6  "Screen6" 11520 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "HannStar Display Corp HE225DPB"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor2"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor3"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor4"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor5"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor6"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:01:00:0"
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:02:00:0"
EndSection

Section "Device"
    Identifier     "Device2"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:04:00:0"
EndSection

Section "Device"
    Identifier     "Device3"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:05:00:0"
EndSection

Section "Device"
    Identifier     "Device4"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:06:00:0"
EndSection

Section "Device"
    Identifier     "Device5"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:08:00:0"
EndSection

Section "Device"
    Identifier     "Device6"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:09:00:0"
EndSection

Section "Screen"

# Removed Option "nvidiaXineramaInfoOrder" "DFP-3"
# Removed Option "nvidiaXineramaInfoOrder" "DFP-2"
# Removed Option "nvidiaXineramaInfoOrder" "DFP-3"
# Removed Option "nvidiaXineramaInfoOrder" "DFP-1"
# Removed Option "nvidiaXineramaInfoOrder" "DFP-3"
# Removed Option "nvidiaXineramaInfoOrder" "DFP-1"
# Removed Option "nvidiaXineramaInfoOrder" "DFP-3"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "DFP-1"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "DFP-1"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"

# Removed Option "nvidiaXineramaInfoOrder" "DFP-1"
    Identifier     "Screen2"
    Device         "Device2"
    Monitor        "Monitor2"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"

# Removed Option "nvidiaXineramaInfoOrder" "DFP-1"
    Identifier     "Screen3"
    Device         "Device3"
    Monitor        "Monitor3"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen4"
    Device         "Device4"
    Monitor        "Monitor4"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen5"
    Device         "Device5"
    Monitor        "Monitor5"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen6"
    Device         "Device6"
    Monitor        "Monitor6"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "DFP-1"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection
bobers
Member
**
Offline Offline

Activity: 64


View Profile
May 31, 2017, 10:30:07 AM
 #252

So here is my lspci

m1@m1-desktop:~$ lspci | grep VGA
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)


Try to turn off motherbord VGA, HDMI audio. Its helped me on 2th PCs
And i think, you have to reboot PC after xorg changes, just restart miner not helped me.
fullzero
Legendary
*
Offline Offline

Activity: 1092



View Profile
May 31, 2017, 01:59:17 PM
 #253

Hi, can anyone help?
I have same 4 ASUS 1060 3GB, all OC, but one works slowly then others.

ETH: 05/31/17-02:41:36 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 78.055 Mh/s, Total Shares: 7, Rejected: 0, Time: 00:06
ETH: GPU0 17.358 Mh/s, GPU1 20.249 Mh/s, GPU2 20.263 Mh/s, GPU3 20.185 Mh/s
GPU0 t=47C fan=75%, GPU1 t=52C fan=75%, GPU2 t=51C fan=75%, GPU3 t=48C fan=75%


What are the complete specifications of your system, to include riser type?

Have you tried swapping out the riser on that card?

How are you powering your risers?


So here is my lspci

m1@m1-desktop:~$ lspci | grep VGA
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)


Try to turn off motherbord VGA, HDMI audio. Its helped me on 2th PCs
And i think, you have to reboot PC after xorg changes, just restart miner not helped me.

Right, restarting the mining process will not reinitialize X, logging out, then logging back in or rebooting should.  I would recommend logging out, then logging back in as its much faster.


fullzero
Legendary
*
Offline Offline

Activity: 1092



View Profile
May 31, 2017, 02:03:17 PM
 #254

So here is my lspci

m1@m1-desktop:~$ lspci | grep VGA
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)


and here is my xorg.conf, as I see the busid is matched. I tried to change to value, for example, from 01:00:0 to 01:00.0, but it did not work.


Try replacing your xorg.conf contents with this (open the xorg.conf with command from eariler, select all and delete, paste in the following code, save, logout, login):

Code:
Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" 1920 0
    Screen      2  "Screen2" 3840 0
    Screen      3  "Screen3" 5760 0
    Screen      4  "Screen4" 7680 0
    Screen      5  "Screen5" 9600 0
    Screen      6  "Screen6" 11520 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "HannStar Display Corp HE225DPB"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor2"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor3"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor4"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor5"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor6"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1080 Ti"
    BusID          "PCI:01:00:0"
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1080 Ti"
    BusID          "PCI:02:00:0"
EndSection

Section "Device"
    Identifier     "Device2"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1080 Ti"
    BusID          "PCI:04:00:0"
EndSection

Section "Device"
    Identifier     "Device3"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1080 Ti"
    BusID          "PCI:05:00:0"
EndSection

Section "Device"
    Identifier     "Device4"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1080 Ti"
    BusID          "PCI:06:00:0"
EndSection

Section "Device"
    Identifier     "Device5"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1080 Ti"
    BusID          "PCI:08:00:0"
EndSection

Section "Device"
    Identifier     "Device6"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1080 Ti"
    BusID          "PCI:09:00:0"
EndSection

Section "Screen"

    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "DFP-1"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "DFP-1"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"

    Identifier     "Screen2"
    Device         "Device2"
    Monitor        "Monitor2"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"

    Identifier     "Screen3"
    Device         "Device3"
    Monitor        "Monitor3"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen4"
    Device         "Device4"
    Monitor        "Monitor4"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen5"
    Device         "Device5"
    Monitor        "Monitor5"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen6"
    Device         "Device6"
    Monitor        "Monitor6"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Let me know if this works.


bentcrypto
Full Member
***
Offline Offline

Activity: 178


View Profile
May 31, 2017, 02:07:49 PM
 #255

The image of nvOC is 14.9gb but the two 16gb usb sticks I have tried only have 14.7gb or 14.8gb capacity.
I keep getting errors at the end when using hddrawcopy Sad

  
citronick
Hero Member
*****
Offline Offline

Activity: 798


winter*juvia


View Profile
May 31, 2017, 02:12:40 PM
 #256

I have funny situation with my 6 x Zotac 1070 Minis....

doing lspci --- I see 6  x VGA devices

but EWBF mines with only 5 cards

Did I forget to change a setting in onebash for 6 cards?

Motherboard is using MSI Z270-A PRO.

Ran same rig with Win10..... same thing.... EWBF and other miners..... sees only 5 cards but this time Device Manager also sees five cards

Citronick's Beer & Chicken Wings Fund : 32oo5tk1RfTbndrUjWvHJ9yT3bb2EyQYkq
fullzero
Legendary
*
Offline Offline

Activity: 1092



View Profile
May 31, 2017, 02:15:31 PM
 #257

The image of nvOC is 14.9gb but the two 16gb usb sticks I have tried only have 14.7gb or 14.8gb capacity.
I keep getting errors at the end when using hddrawcopy Sad

  

You may be able to still use those USB despite the error and slightly less capacity (you might have only missed unnecessary files).  Most likely not.

Give it try anyway.


fullzero
Legendary
*
Offline Offline

Activity: 1092



View Profile
May 31, 2017, 02:19:17 PM
 #258

I have funny situation with my 6 x Zotac 1070 Minis....

doing lspci --- I see 6  x VGA devices

but EWBF mines with only 5 cards

Did I forget to change a setting in onebash for 6 cards?

Motherboard is using MSI Z270-A PRO.

Ran same rig with Win10..... same thing.... EWBF and other miners..... sees only 5 cards but this time Device Manager also sees five cards

Let the rig mine for a bit (lower fan speed if using manual fans) so that the cards that are recognized get hot and can be distinguished from the one that is INOP. (it may not be the one you expect by indexing)
 
Identify the card that is INOP. 

Power off the rig and try using that card by itself in the primary 16x slot on any mobo. 

This should tell you if the card itself is bad.


VoskCoin
Full Member
***
Offline Offline

Activity: 224


YouTube.com/VoskCoin


View Profile WWW
May 31, 2017, 02:25:41 PM
 #259

The image of nvOC is 14.9gb but the two 16gb usb sticks I have tried only have 14.7gb or 14.8gb capacity.
I keep getting errors at the end when using hddrawcopy Sad

  

What USB sticks are you using? Is it this one https://www.amazon.com/Lexar-JumpDrive-16GB-Flash-Drive/dp/B00S5V5PMY?th=1 ?

Check out my Crypto YouTube channel
https://www.youtube.com/VoskCoin
If you enjoy my content click Subscribe
fullzero
Legendary
*
Offline Offline

Activity: 1092



View Profile
May 31, 2017, 02:32:42 PM
 #260

The image of nvOC is 14.9gb but the two 16gb usb sticks I have tried only have 14.7gb or 14.8gb capacity.
I keep getting errors at the end when using hddrawcopy Sad  

What USB sticks are you using? Is it this one https://www.amazon.com/Lexar-JumpDrive-16GB-Flash-Drive/dp/B00S5V5PMY?th=1 ?

Yes; there is a link in the OP as well.

Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 [13] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 ... 284 »
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!