MadMex
Newbie
Offline
Activity: 18
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2017, 12:56:59 AM |
|
I have ordered 2 l3+ (for the September batch) along with 2 apw++ for the July S9 batch, and I was wondering what else I need to know/have before I am ready to begin mining. I am planning on setting up the machines in their own room of my home and I couldn't find any information about how many can be hooked up in one room or how many on the same circiut. Also is there anything I need to worry about regarding the placement of the miners or the powering of the miners or the profability of them in September. I am very new to mining and any helpful responses would be greatly appreciated. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) (also it says I need a power cable for each APW++ and I was wondering what I need for that too)
|
|
|
|
suchmoon
Legendary
Offline
Activity: 3794
Merit: 9011
https://bpip.org
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2017, 01:58:08 AM |
|
I have ordered 2 l3+ (for the September batch) along with 2 apw++ for the July S9 batch, and I was wondering what else I need to know/have before I am ready to begin mining. I am planning on setting up the machines in their own room of my home and I couldn't find any information about how many can be hooked up in one room or how many on the same circiut. Also is there anything I need to worry about regarding the placement of the miners or the powering of the miners or the profability of them in September. I am very new to mining and any helpful responses would be greatly appreciated. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) (also it says I need a power cable for each APW++ and I was wondering what I need for that too) Assuming you're in the US, you'll likely need two separate circuits. One L3+ will be pulling 8-9 amps so you can only run one on a typical 15A circuit, MAYBE two on a 20A but not recommended (you should not exceed 80% of breaker rating). I don't think anybody can help you with profitability. Most likely the difficulty will increase and profitability will decrease by then, but nobody can tell how much. You'll need a power cable like this (again, assuming you're in the US/Canada/etc): https://www.amazon.com/Tripp-Lite-Heavy-Duty-IEC-320-C13-P007-006/dp/B0027JRMD0Edit: you'll also need a wired internet connection, e.g. two Ethernet cables from your router.
|
|
|
|
sunny163
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 126
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2017, 02:28:48 AM |
|
Guys what you think about the price for L3+ on hashnest for next restock ?
|
|
|
|
MadMex
Newbie
Offline
Activity: 18
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2017, 04:00:52 AM |
|
I have ordered 2 l3+ (for the September batch) along with 2 apw++ for the July S9 batch, and I was wondering what else I need to know/have before I am ready to begin mining. I am planning on setting up the machines in their own room of my home and I couldn't find any information about how many can be hooked up in one room or how many on the same circiut. Also is there anything I need to worry about regarding the placement of the miners or the powering of the miners or the profability of them in September. I am very new to mining and any helpful responses would be greatly appreciated. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) (also it says I need a power cable for each APW++ and I was wondering what I need for that too) Assuming you're in the US, you'll likely need two separate circuits. One L3+ will be pulling 8-9 amps so you can only run one on a typical 15A circuit, MAYBE two on a 20A but not recommended (you should not exceed 80% of breaker rating). I don't think anybody can help you with profitability. Most likely the difficulty will increase and profitability will decrease by then, but nobody can tell how much. You'll need a power cable like this (again, assuming you're in the US/Canada/etc): https://www.amazon.com/Tripp-Lite-Heavy-Duty-IEC-320-C13-P007-006/dp/B0027JRMD0Edit: you'll also need a wired internet connection, e.g. two Ethernet cables from your router. Thanks for the detailed answer, if I were to get a 240v circuit how many miners would I be able to have on it? And what kind of cooling would I need for 2 L3+'s?
|
|
|
|
suchmoon
Legendary
Offline
Activity: 3794
Merit: 9011
https://bpip.org
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2017, 04:59:24 AM |
|
Thanks for the detailed answer, if I were to get a 240v circuit how many miners would I be able to have on it? And what kind of cooling would I need for 2 L3+'s?
One miner would need ~4 amps on 240V, so if you get a 20 amp 240V circuit - 3 miners at least, maybe 4. Cooling depends on your climate mostly. Don't waste money on A/C unless you're somewhere like Arizona. Just venting the room (window fan perhaps?) may be sufficient.
|
|
|
|
sqnkee
Newbie
Offline
Activity: 54
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2017, 08:15:10 AM |
|
I have ordered 2 l3+ (for the September batch) along with 2 apw++ for the July S9 batch, and I was wondering what else I need to know/have before I am ready to begin mining. I am planning on setting up the machines in their own room of my home and I couldn't find any information about how many can be hooked up in one room or how many on the same circiut. Also is there anything I need to worry about regarding the placement of the miners or the powering of the miners or the profability of them in September. I am very new to mining and any helpful responses would be greatly appreciated. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) (also it says I need a power cable for each APW++ and I was wondering what I need for that too) Only few things ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) 1. Miners are loud and they give off a lot of heat. So in a home environment basemant or the garage are the best room. 2. One L3+ takes less than 4 ampers on 230v line and less than 8 for 110v. Check FUSE, how many ampers it got. Also wires. long term load of 1,5mm wire is maximum 15 ampers, 2,5mm - 20 ampers.
|
|
|
|
HagssFIN
Legendary
Offline
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2017, 10:06:16 AM |
|
Yes, the problem is that the last reply from them was months ago. What do you mean? Sidehack is active and has recent activity here at the forum. I was referring only about that specific thread Well that doesn't mean anything. He still has the stuff for sale.
|
|
|
|
wheelz1200
Legendary
Offline
Activity: 3738
Merit: 1414
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2017, 11:55:52 AM |
|
I have ordered 2 l3+ (for the September batch) along with 2 apw++ for the July S9 batch, and I was wondering what else I need to know/have before I am ready to begin mining. I am planning on setting up the machines in their own room of my home and I couldn't find any information about how many can be hooked up in one room or how many on the same circiut. Also is there anything I need to worry about regarding the placement of the miners or the powering of the miners or the profability of them in September. I am very new to mining and any helpful responses would be greatly appreciated. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) (also it says I need a power cable for each APW++ and I was wondering what I need for that too) Assuming you're in the US, you'll likely need two separate circuits. One L3+ will be pulling 8-9 amps so you can only run one on a typical 15A circuit, MAYBE two on a 20A but not recommended (you should not exceed 80% of breaker rating). I don't think anybody can help you with profitability. Most likely the difficulty will increase and profitability will decrease by then, but nobody can tell how much. You'll need a power cable like this (again, assuming you're in the US/Canada/etc): https://www.amazon.com/Tripp-Lite-Heavy-Duty-IEC-320-C13-P007-006/dp/B0027JRMD0Edit: you'll also need a wired internet connection, e.g. two Ethernet cables from your router. Thanks for the detailed answer, if I were to get a 240v circuit how many miners would I be able to have on it? And what kind of cooling would I need for 2 L3+'s? Go with a 20 amp 240v circuit for 2 L3s, it will give you enough room to add another if you choose. As far as cooling that is all dependant on miner placement in you house/garage/etc. As well as your specific climate where you live
|
|
|
|
usenet
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2017, 12:28:34 PM |
|
Guys what you think about the price for L3+ on hashnest for next restock ?
I would not expect a low price. Bitmain sells L3+ for 46.9 LTC in China. For us price is 41 LTC. The next L3+ in Hashnest can cost even up to around $5600.
|
|
|
|
wheelz1200
Legendary
Offline
Activity: 3738
Merit: 1414
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2017, 12:41:22 PM |
|
Guys what you think about the price for L3+ on hashnest for next restock ?
I would not expect a low price. Bitmain sells L3+ for 46.9 LTC in China. For us price is 41 LTC. The next L3+ in Hashnest can cost even up to around $5600. That price is crazy. No way would they sell enough at that price.
|
|
|
|
SplinterZalinsk
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2017, 02:40:34 PM |
|
Yes, the problem is that the last reply from them was months ago. What do you mean? Sidehack is active and has recent activity here at the forum. I was referring only about that specific thread Well that doesn't mean anything. He still has the stuff for sale. I sent a msg to him yesterday and got no reply until now... I'd be pissed if he delayed responding to my messages after I sent the money. Better get it from somewhere else. Thank you any way, friend! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
HagssFIN
Legendary
Offline
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2017, 04:17:07 PM |
|
Yes, the problem is that the last reply from them was months ago. What do you mean? Sidehack is active and has recent activity here at the forum. I was referring only about that specific thread Well that doesn't mean anything. He still has the stuff for sale. I sent a msg to him yesterday and got no reply until now... I'd be pissed if he delayed responding to my messages after I sent the money. Better get it from somewhere else. Thank you any way, friend! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) He is a busy manufacturer and most likely wants to have some free time from work in weekends just like most of us. You are being impatient.
|
|
|
|
ZedZedNova
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 475
Merit: 265
Ooh La La, C'est Zoom!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2017, 09:54:24 PM |
|
Yes, the problem is that the last reply from them was months ago. What do you mean? Sidehack is active and has recent activity here at the forum. I was referring only about that specific thread Well that doesn't mean anything. He still has the stuff for sale. I sent a msg to him yesterday and got no reply until now... I'd be pissed if he delayed responding to my messages after I sent the money. Better get it from somewhere else. Thank you any way, friend! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) That's mighty selfish of you, don't you think? sidehack has a life of his own, he's busy guy, and there is a pretty good chance that he is located in a different time-zone than you. You are not his only customer, and you are no more important than any of the other customers he has, perhaps even less so since you haven't purchased from him yet. Try reading the first message of the purchase thread and all the details are usually presented. I've dealt with sidehack, both via message threads and PMs on this forum. I have purchased a modified S7-LN miner through him, and everything was as advertised.
|
No mining at the moment.
|
|
|
sunny163
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 126
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2017, 03:51:46 AM |
|
Guys what you think about the price for L3+ on hashnest for next restock ?
I would not expect a low price. Bitmain sells L3+ for 46.9 LTC in China. For us price is 41 LTC. The next L3+ in Hashnest can cost even up to around $5600. That price is crazy. No way would they sell enough at that price. yes because $5600 is way too high and ROI i think far from this point
|
|
|
|
crypticj
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2017, 06:41:23 AM |
|
Guys what you think about the price for L3+ on hashnest for next restock ?
I would not expect a low price. Bitmain sells L3+ for 46.9 LTC in China. For us price is 41 LTC. The next L3+ in Hashnest can cost even up to around $5600. That price is crazy. No way would they sell enough at that price. yes because $5600 is way too high and ROI i think far from this point Nope $5600 is easy for them to sell... the other way they can sell it is currently 1 MH/s on Hashnest Market is going for 0.3080 LTC so so 1 L3+ will be 504 x .3080 = 155 LTC x $43 per LTC = $6675 so if Hashnest is smarter than slowly sell L3+ on the Market Average Daily Volume is 24000 Mh/s or about 50 L3+ day they can keep mining for themselves until they can sell all there hash power on open market.
|
|
|
|
kodokbuduk
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2017, 05:43:45 PM |
|
one of my L3+ is not detecting one hashboard, tried to swap signal cables to another port without success.. i can see the red LED is on and the heatsink is hot..some how the hashbaord is not showing on L3+ miner status, damitttt have to send to bitmain..has any one experience this?
|
|
|
|
SplinterZalinsk
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2017, 06:28:45 PM |
|
Yes, the problem is that the last reply from them was months ago. What do you mean? Sidehack is active and has recent activity here at the forum. I was referring only about that specific thread Well that doesn't mean anything. He still has the stuff for sale. I sent a msg to him yesterday and got no reply until now... I'd be pissed if he delayed responding to my messages after I sent the money. Better get it from somewhere else. Thank you any way, friend! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) That's mighty selfish of you, don't you think? sidehack has a life of his own, he's busy guy, and there is a pretty good chance that he is located in a different time-zone than you. You are not his only customer, and you are no more important than any of the other customers he has, perhaps even less so since you haven't purchased from him yet. Try reading the first message of the purchase thread and all the details are usually presented. I've dealt with sidehack, both via message threads and PMs on this forum. I have purchased a modified S7-LN miner through him, and everything was as advertised. Sorry if looked like this... I bet that getting that PSU for L3+ with them is a good option as well. I'll also do business with them soon... Thanks for the collaboration guys!
|
|
|
|
kalombo
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 70
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2017, 06:29:59 PM |
|
No experience on that man. Im still waiting for them to ship my machines. May i ask if these machines are running extremely hot? I mean i know any operating machine will get hot, but i mean, should i be scared to leave my house for a few hours thinking something might catch fire? It might sound dumb, but better be safe than sorry! I also know that the machine will switch off if it reach a dangerous temp..
Thank you guys
|
|
|
|
SplinterZalinsk
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2017, 06:35:23 PM Last edit: June 25, 2017, 08:59:38 PM by SplinterZalinsk |
|
one of my L3+ is not detecting one hashboard, tried to swap signal cables to another port without success.. i can see the red LED is on and the heatsink is hot..some how the hashbaord is not showing on L3+ miner status, damitttt have to send to bitmain..has any one experience this?
Unfortunately these things happens ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) and can be with anyone... How long it worked without any problems? What PSU are you using?
|
|
|
|
kodokbuduk
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2017, 10:41:54 PM |
|
No experience on that man. Im still waiting for them to ship my machines. May i ask if these machines are running extremely hot? I mean i know any operating machine will get hot, but i mean, should i be scared to leave my house for a few hours thinking something might catch fire? It might sound dumb, but better be safe than sorry! I also know that the machine will switch off if it reach a dangerous temp..
Thank you guys
The temp is better than s9
|
|
|
|
|