zamans98
|
|
October 20, 2017, 05:25:49 PM |
|
not so good news Nov 1-15 batch is being shipped.
I got the confirmation and tracking number.
HOLY SH1T... Get ready for crazy time ahead...
|
|
|
|
Chan8
|
|
October 20, 2017, 05:46:45 PM |
|
not so good news Nov 1-15 batch is being shipped.
I got the confirmation and tracking number.
HOLY SH1T... Get ready for crazy time ahead...
So your telling us everyone ordered for november batch are being shipped now? Can anyone else confirm this? So your tracking actually shows shipped and is on the way? If so, thats crazy. Im still waiting for my order and tracking number. But thats for november 21. Anyways anyone else got this shipping confirmed for november 1-15 order? Haha and yimour right, its going to be a crazy month.
|
|
|
|
|
zamans98
|
|
October 20, 2017, 06:10:46 PM |
|
not so good news Nov 1-15 batch is being shipped.
I got the confirmation and tracking number.
HOLY SH1T... Get ready for crazy time ahead...
So your telling us everyone ordered for november batch are being shipped now? Can anyone else confirm this? So your tracking actually shows shipped and is on the way? If so, thats crazy. Im still waiting for my order and tracking number. But thats for november 21. Anyways anyone else got this shipping confirmed for november 1-15 order? Haha and yimour right, its going to be a crazy month. Yes, its being shipped now. check those images for verification. So we all got fcuked hard ... X11 is a red zone now. watch-out, x3 of the network hash rate increase in next 10 days!!
|
|
|
|
JohnDoe3490
|
|
October 20, 2017, 06:15:56 PM |
|
not so good news Nov 1-15 batch is being shipped.
I got the confirmation and tracking number.
HOLY SH1T... Get ready for crazy time ahead...
So your telling us everyone ordered for november batch are being shipped now? Can anyone else confirm this? So your tracking actually shows shipped and is on the way? If so, thats crazy. Im still waiting for my order and tracking number. But thats for november 21. Anyways anyone else got this shipping confirmed for november 1-15 order? Haha and yimour right, its going to be a crazy month. Yes, its being shipped now. check those images for verification. So we all got fcuked hard ... X11 is a red zone now. watch-out, x3 of the network hash rate increase in next 10 days!! So my orders are finally going to come lol. Sorry guys!
|
|
|
|
Dopert
|
|
October 20, 2017, 06:38:56 PM |
|
Yes, its being shipped now.
check those images for verification.
So we all got fcuked hard ... X11 is a red zone now. watch-out, x3 of the network hash rate increase in next 10 days!!
We all were speculating this would come, so thats no surprise. Be happy that you order is deliverd early and have no delays. Thats my concern for batch 21 - 30 nov. Because i presold 3 of the 4.
|
|
|
|
zamans98
|
|
October 20, 2017, 06:49:55 PM |
|
Yes, its being shipped now.
check those images for verification.
So we all got fcuked hard ... X11 is a red zone now. watch-out, x3 of the network hash rate increase in next 10 days!!
We all were speculating this would come, so thats no surprise. Be happy that you order is deliverd early and have no delays. Thats my concern for batch 21 - 30 nov. Because i presold 3 of the 4. No, i read many pages back., nobody speculate anything about 1-15 NOV bacthes being shipped early. You're just being paranoid. What we are saying, end NOV batch. That is when the world shakes. Now this batch is being shipped early, cutting potential earning for late OCT batches. RIP ROI. YOU WILL BE MISSED.
|
|
|
|
madmartyk
Legendary
Offline
Activity: 2702
Merit: 1030
Yes I am a pirate, 300 years too late!
|
|
October 20, 2017, 06:56:13 PM |
|
They did the same with the l3+'s
|
|
|
|
Chan8
|
|
October 20, 2017, 07:02:32 PM |
|
not so good news Nov 1-15 batch is being shipped.
I got the confirmation and tracking number.
HOLY SH1T... Get ready for crazy time ahead...
So your telling us everyone ordered for november batch are being shipped now? Can anyone else confirm this? So your tracking actually shows shipped and is on the way? If so, thats crazy. Im still waiting for my order and tracking number. But thats for november 21. Anyways anyone else got this shipping confirmed for november 1-15 order? Haha and yimour right, its going to be a crazy month. Yes, its being shipped now. check those images for verification. So we all got fcuked hard ... X11 is a red zone now. watch-out, x3 of the network hash rate increase in next 10 days!! Wow, we are getting butt fcked.. well atleast for my batch coming late november. You should be happy, you guys are the winners right now for october batch. Lol, cheaper price per miner and a bit earlier ship date. At the moment october batch seems to be the smartest choice. Especially with the submodel of 19.3g models being shipped out. Fuk i really wished i didnt make that order. November 21st batch seem to be selling for a whole month straight, what seem like an unlimited quantity available. Yeah rip roi, and dash price doesnt seem like it will be moving up anytime soon. Hope the crypto gods will bless us x11 miners soon. Or my investment will be going straight down the drain.
|
|
|
|
thesavoyard
|
|
October 20, 2017, 07:11:24 PM |
|
Seems to have dropped to a trickle already. I sure hope we get a major price increase soon.
|
|
|
|
RealKariverson
|
|
October 20, 2017, 07:13:10 PM |
|
Bitmain you assholes. You delay the October batch resulting in me losing my buyer. And you ship it out together with the November batch?!?! I'm never buying a 2nd batch miner again. Only 1st batch. Now I have to give mine below cost or wait to ROI in 2 years. I'm very pissed.
|
|
|
|
Dopert
|
|
October 20, 2017, 07:36:20 PM Last edit: October 20, 2017, 07:51:50 PM by Dopert |
|
Yes, its being shipped now.
check those images for verification.
So we all got fcuked hard ... X11 is a red zone now. watch-out, x3 of the network hash rate increase in next 10 days!!
We all were speculating this would come, so thats no surprise. Be happy that you order is deliverd early and have no delays. Thats my concern for batch 21 - 30 nov. Because i presold 3 of the 4. No, i read many pages back., nobody speculate anything about 1-15 NOV bacthes being shipped early. You're just being paranoid. What we are saying, end NOV batch. That is when the world shakes. Now this batch is being shipped early, cutting potential earning for late OCT batches. RIP ROI. YOU WILL BE MISSED. Me paranoid Okay got it, the now running D3 miners missing some weeks of good roi. -------------------------------- Ps. Its also a pitty most funds go to btc. My altcoins stay equal to dollar but drops to btc every week. I got a big red itching spot growing every day not to dump every thing and follow
|
|
|
|
lentyna
|
|
October 20, 2017, 07:37:02 PM |
|
Bitmain setting frequency higher to achieve 19.3 ghs will only guarantee a lot of miners failing prematurely. The D3 start to have a lot of HW errors at 70c+. I found it was most stable running temp 69c and under. once miner hit 70c HW errors would go into thousands on some cards causing it to crash and miner would need to be reset. The only way to run this miner at such high frequency is fan at 70%-100% which is super loud. If you have adequate cooling keeping miner under 70C it should run stable.
Nah, mine running good even on 83 deg C. few HW. I'm in a tropical and high humid climate. running for over 1 day now. 1 day doesn't say much, be careful running at those temps.
|
|
|
|
sil2222
|
|
October 20, 2017, 08:10:44 PM |
|
Bitmain setting frequency higher to achieve 19.3 ghs will only guarantee a lot of miners failing prematurely. The D3 start to have a lot of HW errors at 70c+. I found it was most stable running temp 69c and under. once miner hit 70c HW errors would go into thousands on some cards causing it to crash and miner would need to be reset. The only way to run this miner at such high frequency is fan at 70%-100% which is super loud. If you have adequate cooling keeping miner under 70C it should run stable.
Nah, mine running good even on 83 deg C. few HW. I'm in a tropical and high humid climate. running for over 1 day now. 1 day doesn't say much, be careful running at those temps. Thermal breakdown does not happen overnight. Running 83c is way too hot in fact most GPU unit with heavy aftermarket coolers dont recommend running above 80c. The L3+ shuts down at 80C. testing on D3 units all had same effect once temp hit 70C they became a little unstable and eventually a card would stop hashing. Keeping miners at below 70C had best results.
|
|
|
|
Chan8
|
|
October 20, 2017, 08:15:08 PM |
|
Bitmain setting frequency higher to achieve 19.3 ghs will only guarantee a lot of miners failing prematurely. The D3 start to have a lot of HW errors at 70c+. I found it was most stable running temp 69c and under. once miner hit 70c HW errors would go into thousands on some cards causing it to crash and miner would need to be reset. The only way to run this miner at such high frequency is fan at 70%-100% which is super loud. If you have adequate cooling keeping miner under 70C it should run stable.
Nah, mine running good even on 83 deg C. few HW. I'm in a tropical and high humid climate. running for over 1 day now. 1 day doesn't say much, be careful running at those temps. I agree, if your running your miners at 83 degree celcius? I suggest your figure a way to keep them running at a way lower temperature. A day of mining at those temps wont be a problem. But in the long run, something is going to happen and you will never see roi on those units. Just my opinion, but 80C sounds like something is going to fry or burn up soon on those boards. I never bit those temps before, so i have experience. But from what everyone is telling me and research ive done. That temp range is not where you want your miners to be at.
|
|
|
|
lentyna
|
|
October 20, 2017, 08:16:01 PM |
|
Bitmain setting frequency higher to achieve 19.3 ghs will only guarantee a lot of miners failing prematurely. The D3 start to have a lot of HW errors at 70c+. I found it was most stable running temp 69c and under. once miner hit 70c HW errors would go into thousands on some cards causing it to crash and miner would need to be reset. The only way to run this miner at such high frequency is fan at 70%-100% which is super loud. If you have adequate cooling keeping miner under 70C it should run stable.
Nah, mine running good even on 83 deg C. few HW. I'm in a tropical and high humid climate. running for over 1 day now. 1 day doesn't say much, be careful running at those temps. Thermal breakdown does not happen overnight. Running 83c is way too hot in fact most GPU unit with heavy aftermarket coolers dont recommend running above 80c. The L3+ shuts down at 80C. testing on D3 units all had same effect once temp hit 70C they became a little unstable and eventually a card would stop hashing. Keeping miners at below 70C had best results. Yeah I have 80C in my settings for miner shut down (I think it's default from Bitmain).
|
|
|
|
Bibi187
Full Member
Offline
Activity: 420
Merit: 106
https://steemit.com/@bibi187
|
|
October 20, 2017, 08:28:57 PM |
|
Bitmain setting frequency higher to achieve 19.3 ghs will only guarantee a lot of miners failing prematurely. The D3 start to have a lot of HW errors at 70c+. I found it was most stable running temp 69c and under. once miner hit 70c HW errors would go into thousands on some cards causing it to crash and miner would need to be reset. The only way to run this miner at such high frequency is fan at 70%-100% which is super loud. If you have adequate cooling keeping miner under 70C it should run stable.
Nah, mine running good even on 83 deg C. few HW. I'm in a tropical and high humid climate. running for over 1 day now. 1 day doesn't say much, be careful running at those temps. Thermal breakdown does not happen overnight. Running 83c is way too hot in fact most GPU unit with heavy aftermarket coolers dont recommend running above 80c. The L3+ shuts down at 80C. testing on D3 units all had same effect once temp hit 70C they became a little unstable and eventually a card would stop hashing. Keeping miners at below 70C had best results. Yeah I have 80C in my settings for miner shut down (I think it's default from Bitmain). So after warranty he can be interesting to up frequency on this D3 I am actually on discusion with technical service, i will try to reach more information about this. If nothing was modified this is probably safe to do. Every one speak about temp, what temp you take as referral ? PCB temp or CHIP temp ?
|
|
|
|
adeelnk
Newbie
Offline
Activity: 32
Merit: 0
|
|
October 20, 2017, 08:52:59 PM |
|
My D3 is being shipped without a power supply. Would I be able to use a Corsair or Evga power supply with it? Any suggestions? Thanks.
|
|
|
|
Sjeikz
Newbie
Offline
Activity: 71
Merit: 0
|
|
October 20, 2017, 09:18:10 PM |
|
Actually just underclocked my oct batch (19.3) to keep running below 70. Running currently at 14k mh/s. 0HW so far. Seems like at default settings it was running up too 80 and kept resetting itself for some reason after an hour or so.
|
|
|
|
hardworker27
Newbie
Offline
Activity: 58
Merit: 0
|
|
October 20, 2017, 09:32:23 PM |
|
I'm getting one D3 in Nov. So were you able to change the fan speed to reduce the noise? Actually just underclocked my oct batch (19.3) to keep running below 70. Running currently at 14k mh/s. 0HW so far. Seems like at default settings it was running up too 80 and kept resetting itself for some reason after an hour or so.
|
|
|
|
|