[ANN][DASH] Dash (dash.org) | First Self-Funding Self-Governing Crypto Currency

[HammerHedd]

We're happy to announce the DarkSend closed alpha is ready, we're just putting some finishing touches on it and we'll launch sometime this weekend. We're really excited to show this off to everyone!

+1

Now if I only had coins to send ...

[1715317933]

1715317933

[1715317933]

1715317933

[1715317933]

1715317933

[1715317933]

1715317933

[1715317933]

1715317933

[1715317933]

1715317933

[Riseman]

Phm gave us his GPU miner code

No support for Nvidia, I guess?

[mattmct]

Phm gave us his GPU miner code, and I merged in his changes into my project at https://github.com/evan82/darkcoin-sgminer

I got it to compile and it seems to work for me, although I have a terrible GPU so I'm not positive.

Try to compile it and let me know if it works so I can pay the man.

Thanks!

Holy crap time to go!  I'll see if I can get this running on my unix / BAMT rig with three Radeon GPUs.  I'll give it a shot, but I might need some step by steps!

It just compiled it, and it looks to be working!

I'm not sure if the feedback im getting from sgminer is correct, but the pool is saying that my working is going at 5,400 kh/s Thats with two 7950's and one R280.  I'm sure my setting, threads etc are far from optimal.

sgminer version 4.0.0 - Started: [2014-02-15 02:39:43]
--------------------------------------------------------------------------------
(5s):5.488M (avg):5.414Mh/s | A:0  R:0  HW:0  WU:0.0/m
ST: 2  SS: 0  NB: 5  LW: 151  GF: 0  RF: 0
Connected to (null) (stratum) diff 0 as user xxxx
Block: 835147cb...  Diff:23  Started: [02:45:08]  Best share: 0
--------------------------------------------------------------------------------
[P]ool management [G]PU management ettings [D]isplay options [Q]uit
 GPU 0:                | 2.028M/2.053Mh/s | R:  0.0% HW:0 WU:0.0/m I:13
 GPU 1:                | 1.672M/1.689Mh/s | R:  0.0% HW:0 WU:0.0/m I:20
 GPU 2:                | 1.715M/1.733Mh/s | R:  2.9% HW:0 WU:0.0/m I:20
--------------------------------------------------------------------------------

[02:43:32] Accepted 0e000000 Diff 0/0 GPU 1 at (null)
[02:43:42] Accepted 6a000000 Diff 0/0 GPU 0 at (null)
[02:43:51] Network diff set to 23
[02:43:51] Stratum from (null) detected new block
[02:44:07] Network diff set to 23
[02:44:07] Stratum from (null) detected new block
[02:44:10] Accepted 35000000 Diff 0/0 GPU 2 at (null)
[02:44:18] Accepted 3e000000 Diff 0/0 GPU 2 at (null)
[02:44:21] Accepted 4a000000 Diff 0/0 GPU 1 at (null)
[02:44:25] Accepted 39000000 Diff 0/0 GPU 1 at (null)
[02:44:28] Accepted 57000000 Diff 0/0 GPU 1 at (null)
[02:44:28] Accepted 22000000 Diff 0/0 GPU 0 at (null)
[02:44:30] Accepted 09000000 Diff 0/0 GPU 0 at (null)
[02:44:34] Accepted 6a000000 Diff 0/0 GPU 1 at (null)
[02:44:41] Accepted 1a000000 Diff 0/0 GPU 0 at (null)
[02:44:50] Accepted 5f000000 Diff 0/0 GPU 0 at (null)
[02:44:50] Accepted 67000000 Diff 0/0 GPU 0 at (null)
[02:44:53] Accepted 27000000 Diff 0/0 GPU 0 at (null)

Thanks to all involed, I'll be sending some coins!

Edit: Yeah, getting about 5.5Mh/s right now with my three cards.  But I noticed I'm only pulling about 450W at the wall, where as I normally pull about 800W, so I'm sure it can go even faster.

[traderman]

Can someone please compile a windows exe?

Phm gave us his GPU miner code, and I merged in his changes into my project at https://github.com/evan82/darkcoin-sgminer

I got it to compile and it seems to work for me, although I have a terrible GPU so I'm not positive.

Try to compile it and let me know if it works so I can pay the man.

Thanks!

[TanteStefana]

play it safe....create 6 completely unique imaginary people.

Warning: VPS crypto mining may be dangerous for your mental health. (This is a joke )

I am mining on the lotterymining pool right now and I suppose there is something off with it. The block finding rate is very unstable even though the hashrate doesn't change that much. It differs from several blocks per hour to a couple blocks a day. I think there might be a problem with pool software or network connection.

As far as I understand very long time between blocks doesn't lead to larger rewards but only to wasted hashpower.

Yep, that's why I moved out of there temporarily.

i will restart the server tomorrow when im in harbour, i dont dare to do so now, since i dont know when i have internet, and when i dont, so i might end up restarting it, but unable to start up stratum when its done rebooting..

Seems to be working fine for me right now.  I think it's just that we're small, and we can go through dry spells.  Also, the website being a little laggy doesn't equate to less coin per hour?? 

[Probleminfected]

Can someone please compile a windows exe?

Phm gave us his GPU miner code, and I merged in his changes into my project at https://github.com/evan82/darkcoin-sgminer

I got it to compile and it seems to work for me, although I have a terrible GPU so I'm not positive.

Try to compile it and let me know if it works so I can pay the man.

Thanks!

Yes please, windows!

Thank you!

[duazo]

Phm gave us his GPU miner code, and I merged in his changes into my project at https://github.com/evan82/darkcoin-sgminer

I got it to compile and it seems to work for me, although I have a terrible GPU so I'm not positive.

Try to compile it and let me know if it works so I can pay the man.

Thanks!

Works for me. 2MH on a 280X, 1.2MH on a 6950.

Efficiency is better than I was expecting (based on load). Only slightly below that of the Maxcoin keccak kernel, which is also SHA-3, but considering there's 11 SHA-3 kernels here, I think that's pretty good going. Good job phm!

[TanteStefana]

There is no windows delivery yet?
For the new version of minerd

I can do this on Linux but haven't a clue for windows. I'm reading up on it, and if by some miracle I compile something that can be shared...I'll certainly post it, but don't hold your breath!  LOL  Sorry!

[tabnk]

WE NEED WINDOWS SGMINER !!!!!!!!!!!!!!!!!!

[InternetApe]

1,500DRK to someone that will help me get a windows environment setup to compile darkcoin-qt.exe, darkcoind.exe, minerd and sgminer.exe.

I can setup remote access to the PC for you.

[mattmct]

Just an update:

2Mh/s on 280X
1.7Mh/s on 7950.

Less than 1% rejected.  My power draw at the wall is only 450W, when litecoin mining it 800W.  So I can probably optimize it a fair bit via thread settings etc.  I have no idea what will work well.

[elmad]

Phm gave us his GPU miner code, and I merged in his changes into my project at https://github.com/evan82/darkcoin-sgminer

I got it to compile and it seems to work for me, although I have a terrible GPU so I'm not positive.

Try to compile it and let me know if it works so I can pay the man.

Thanks!

Works for me. 2MH on a 280X, 1.2MH on a 6950.

Efficiency is better than I was expecting (based on load). Only slightly below that of the Maxcoin keccak kernel, which is also SHA-3, but considering there's 11 SHA-3 kernels here, I think that's pretty good going. Good job phm!

What is the efficiency? Have you mesaured watts?

[duazo]

phm's GPU miner compiled for Windows.

Speed seems identical to linux using 13.11 driver.

Edit: Added zlib1.dll to the zip.
Added example batch and config files.

[buryat]

Did anyone manage to compile it on a Digital Ocean droplet? Will there be an improvement?

$ cat /proc/cpuinfo
flags      : fpu de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pse36 clflush mmx fxsr sse sse2 syscall nx lm up unfair_spinlock pni vmx cx16 popcnt hypervisor lahf_lm

DigitalOcean doesn't support aes nor avx

[AfrikaMan]

phm's GPU miner compiled for Windows.

Speed seems identical to linux using 13.11 driver.

Thanks, I get "zlib1.dll missing".

[TanteStefana]

When trying to start sgminer, I get this:

[18:34:56] Started sgminer 4.0.0
[18:34:56] Started sgminer 4.0.0
[18:34:57] WARNING: GPU_MAX_ALLOC_PERCENT is not specified!
[18:34:57] WARNING: GPU_USE_SYNC_OBJECTS is not specified!

Or else, if I do this in the beginning of the start command, it says command not found:

sudo export GPU_MAX_ALLOC_PERCENT 100; export GPU_USE_SYNC_OBJECTS 1; ./sgminer -o -u -p etc...

Can anyone direct me in the right direction please?  Thanks so much!!

[Probleminfected]

phm's GPU miner compiled for Windows.

Speed seems identical to linux using 13.11 driver.

windows error:

zlib1.dll missing from computer

[InternetApe]

phm's GPU miner compiled for Windows.

Speed seems identical to linux using 13.11 driver.

Im getting 1.4MH/s on a 7970 on Windows 7

[Probleminfected]

I downloaded the zlib1.dll file, where do I need to put it?

[InternetApe]

I downloaded the zlib1.dll file, where do I need to put it?

C:\windows\system32