MegaKill
Member
Offline
Activity: 93
Merit: 10
|
|
February 18, 2014, 04:33:46 AM |
|
i'm rig owner, rented for the first time for 1 day, about 3 hour to expiry. so far my rig perform well, as expected. no problem with reject/hw/stale. in other words, around 2-3% reject/stale, and zero HW. i don't think pool/betarigs will cause any HW, its probably your own cgminer setting. I have a tiny suggestion thou: as my rig is expiry soon, i'm thinking, maybe its good idea to have the option for renter to "renew" rent period. let's say the renter is happy with my rig performance, he can choose to renew the rent near the expiry by making new offer price and time period of renewal, and the rig owner will be notify, and to choose to accept the offer or not. With this, the renter can continue to mine at the pool without interruption, downtime and the hassle to look for a new rigs again with unknown performance, and the rig owner also don't need to worry about putting up new ads again and rig down time. ps: if this already been implemented or being suggested, just ignore me. cause i haven't go through the whole forum thread
|
Cross Exchanges Arbitrage(SPOT) & Spread(Perpetual Futures) Trader
|
|
|
fanepatent
|
|
February 18, 2014, 05:35:55 AM |
|
I have a tiny suggestion thou: as my rig is expiry soon, i'm thinking, maybe its good idea to have the option for renter to "renew" rent period. let's say the renter is happy with my rig performance, he can choose to renew the rent near the expiry by making new offer price and time period of renewal, and the rig owner will be notify, and to choose to accept the offer or not. With this, the renter can continue to mine at the pool without interruption, downtime and the hassle to look for a new rigs again with unknown performance, and the rig owner also don't need to worry about putting up new ads again and rig down time. ps: if this already been implemented or being suggested, just ignore me. cause i haven't go through the whole forum thread +1 That would be a useful feature
|
BURST - BURST-58XP-63WY-XSVQ-ASG9A
|
|
|
fanepatent
|
|
February 18, 2014, 06:34:33 AM |
|
Also, I just noticed. There is no way to change account password? I picked up a keylogger from somewhere and lost 0.1 BTC. So I would like to change my most important passwords...
|
BURST - BURST-58XP-63WY-XSVQ-ASG9A
|
|
|
Fattox
Newbie
Offline
Activity: 58
Merit: 0
|
|
February 18, 2014, 07:59:40 AM |
|
Has anyone had luck using this for Scrypt/A N Factor rental?
I'm using Vertminer v0.5.3 and was watching as the rental started. I waited a few minutes for it to switch to the BetaRigs pool, but it never did. I had another rental of a Scrypt rig (using CGminer) and that changed over no problem.
Is this a problem with Vertminer, or betarigs? Is it a requirement to use a failover parameter in the config? I ask because CGminer didn't require this.
Cheers!
|
|
|
|
coinboing111
Newbie
Offline
Activity: 18
Merit: 0
|
|
February 18, 2014, 08:54:47 AM Last edit: February 18, 2014, 10:18:35 AM by coinboing111 |
|
hmm, i dont know what i do wrong, but my rig still shows as offline.
i put the the betarigs pool at first, than my other
mux, can you check it pls, username at betarigs: coinboing, Rig #1510
|
|
|
|
neo666
|
|
February 18, 2014, 09:01:08 AM |
|
Hi! I just put my rig for rent...but it shows offline. Can you check please? username neo, rig:#1507
Best regards
|
|
|
|
fanepatent
|
|
February 18, 2014, 09:51:57 AM |
|
hmm, i dont know what i do wrong, but my rig still shows as offline.
i put the the betarigs pool at first, than my other
mux, you you check it pls, username at betarigs: coinboing, Rig #1510
Hi! I just put my rig for rent...but it shows offline. Can you check please? username neo, rig:#1507
Best regards
The rigs show offline until you start cgminer/sgminer with betarigs pool in the config After you do that it will show avalable for renting
|
BURST - BURST-58XP-63WY-XSVQ-ASG9A
|
|
|
neo666
|
|
February 18, 2014, 10:17:25 AM |
|
tnx for answering but I put in cgminer, but immediattely it transfer to my pool. What's with that? Always switching to alive pool...? Is there anything else I should do?
|
|
|
|
coinboing111
Newbie
Offline
Activity: 18
Merit: 0
|
|
February 18, 2014, 10:18:15 AM |
|
tnx for answering but I put in cgminer, but immediattely it transfer to my pool. What's with that? exactly same probleme here
|
|
|
|
stefffe
|
|
February 18, 2014, 10:21:33 AM |
|
I swear there is something wrong with combining 2 payments into 1 and sending them to bitstamp or how ever that is done
This is the 2nd time I got 2 renters, both of them renting my #1 rig for 3 hours same day, but only one of these payments goes through to bitstamp, even though I sent an email to bitstamp showing them txid, they said this is 3rd party fault, not theirs.
I saw someone posting something like this 3-4 pages back??
|
|
|
|
fanepatent
|
|
February 18, 2014, 10:26:03 AM |
|
tnx for answering but I put in cgminer, but immediattely it transfer to my pool. What's with that? exactly same probleme here If no one rented your rig the betarigs pool will show as dead. As soon as payment clears after renting the pool will come alive and miner switches to it. So, until someone rents your rigs the betarigs pool will be dead
|
BURST - BURST-58XP-63WY-XSVQ-ASG9A
|
|
|
neo666
|
|
February 18, 2014, 10:29:39 AM |
|
tnx for answering but I put in cgminer, but immediattely it transfer to my pool. What's with that? exactly same probleme here If no one rented your rig the betarigs pool will show as dead. As soon as payment clears after renting the pool will come alive and miner switches to it. So, until someone rents your rigs the betarigs pool will be dead Ok, that I understand. But noone cannot rent, because is there an offline status
|
|
|
|
manusiabumie
|
|
February 18, 2014, 10:30:32 AM |
|
Hi! I just put my rig for rent...but it shows offline. Can you check please? username neo, rig:#1507
Best regards
same problem with me already pointed to betarigs but it's still offline the rig itself is hashing at my usual pool..
|
|
|
|
carly200
|
|
February 18, 2014, 10:35:39 AM |
|
are you using sgminer or newer cgminer? I think they have a problem reconnecting/checking "dead" pools and therefore will never switch back to betarigs.
I am having the same issue and talked to the sminer/cgminer guys already..
|
|
|
|
manusiabumie
|
|
February 18, 2014, 10:43:22 AM |
|
are you using sgminer or newer cgminer? I think they have a problem reconnecting/checking "dead" pools and therefore will never switch back to betarigs.
I am having the same issue and talked to the sminer/cgminer guys already..
i'm just using cpuminer, well, my rigs is just a simple few core xeon processor
|
|
|
|
Whagwan
Newbie
Offline
Activity: 35
Merit: 0
|
|
February 18, 2014, 10:51:28 AM |
|
Annoying that I can't get my single 0/10 rating removed even when Betarigs can confirm that the renters pool was unstable and my rig was mining throughout that rental.
I've replied to the feedback, but would be on the front page if it wasn't for this.
|
|
|
|
neo666
|
|
February 18, 2014, 10:57:50 AM |
|
I'm using cgminer.
|
|
|
|
fanepatent
|
|
February 18, 2014, 11:01:34 AM |
|
I swear there is something wrong with combining 2 payments into 1 and sending them to bitstamp or how ever that is done
This is the 2nd time I got 2 renters, both of them renting my #1 rig for 3 hours same day, but only one of these payments goes through to bitstamp, even though I sent an email to bitstamp showing them txid, they said this is 3rd party fault, not theirs.
I saw someone posting something like this 3-4 pages back??
Maybe use an offline wallet for the cost of the TX. I am using my wallet and sending everything to the exchange when I want to cash out. I never had problems and I think I had a few combined payments. Give it a try
|
BURST - BURST-58XP-63WY-XSVQ-ASG9A
|
|
|
fanepatent
|
|
February 18, 2014, 11:03:59 AM |
|
I'm using cgminer.
Then it might be a problem on betarigs side. I didn't and don't have this problem. And I have switched between sgminer, cgminer, vertminer, bfgminer and the 3.7.3 cgminer for Keccak. Right now I use cgmner 3.7.1 that comes with BAMT 1.1. I was lazy to compile the 3.7.2 version back then and now I am lazy to see if the latest BAMT version works on my rig.
|
BURST - BURST-58XP-63WY-XSVQ-ASG9A
|
|
|
stefffe
|
|
February 18, 2014, 11:29:49 AM |
|
I swear there is something wrong with combining 2 payments into 1 and sending them to bitstamp or how ever that is done
This is the 2nd time I got 2 renters, both of them renting my #1 rig for 3 hours same day, but only one of these payments goes through to bitstamp, even though I sent an email to bitstamp showing them txid, they said this is 3rd party fault, not theirs.
I saw someone posting something like this 3-4 pages back??
Maybe use an offline wallet for the cost of the TX. I am using my wallet and sending everything to the exchange when I want to cash out. I never had problems and I think I had a few combined payments. Give it a try Easy fix, I never thought of this lol. I will try this! Thanks
|
|
|
|
|