[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs

[edgar]

pfff, my sp30 runs at 4.1 on 230V since 2.5.12 upgrade & having to underclock it just to stop it from thermal freaking.

compared with 4.7 at higher temps on prior FW

but if you'd appreciate an opinion id say go with 'now' over later.

[1714169093]

1714169093

[1714169093]

1714169093

[1714169093]

1714169093

[1714169093]

1714169093

[1714169093]

1714169093

[teeGUMES]

Noooo you shoulda told me you fixed it but I should wait 10 hours or so I ordered shortly after this but too soon for the sale.

I can't seem to order an sp20E or 2 sp20E's  the cart tells me no shipping for my address. 

I purchased 1 last week and was looking to get 2 more. Any info on how get the shipping  to  work would help

same here, finally was going to pull the trigger after talkin myself into it all day.. then wasnt able to

You can try again, we solved the issue.

[zvisha]

In order for the SP30 to become non-profitable, it has to mine less then 100$ a month.

Before we worry about end of life recovery of operating costs, we need to worry about recovering the capital costs.

It is very unlikely that the September SP30 will ever pay for itself before it operates in the red.

I am talking science to you but you are just trying to hypnotise me by repeating "it will never ROI". If you don't start talking sense I will have to stop answering.

Ok Zvisha, please answer the question I posed for Guy earlier. Please present the case for Sept. SP30 customers recovering the cost of their purchase. Identify any assumptions you make about network difficulty or other factors and provide a reasonable rationale for them.

I know you are a rational man, now is your chance to show us how the Sept SP30 is likely to recover its cost.

I am not SP marketing and this is just my private opinion.
I don't expect the network to significantly grow beyond 300PH. There is no new technology that will allow that that will ROI. People will have to invest same money into HW that they did in last year, but they will not get the same profit. I don't see people creating hundreds of PHs in the next 6 months.

Now stop and dont make me look stupid, difficulty.

[zvisha]

Also, it looks like undervolting SP20 provides the following:
746 watts /  1350 gh / 0.55 watts per gh
So it is like SP10 at 50% power.

[philipma1957]

Also, it looks like undervolting SP20 provides the following:
746 watts /  1350 gh / 0.55 watts per gh
So it is like SP10 at 50% power.

I can confirm that as I tested it and got using an evga 1300 g2 psu.


I like this sooooo much I just grabbed a second one and will be selling 3 s-3's to make some room.

  @ raskul


 I used your link   here is the transaction


https://blockchain.info/tx/30f72fa4bdacce742f350fee9a00576d5d62b4636f603ecacf8e3bb1a8c60c94


#422675196


YOUR ORDER WAS PLACED SUCCESSFULLY.
YOU'VE JUST PURCHASED THIS

1X CYBER MONDAY SPECIAL PRICE: SP20 JACKSON NOVEMBER BATCH 2 - SHIPPED
Your Order ID is: #3446

An email receipt containing information about your order will soon follow. Please keep it for your records.



Thank you for shopping at Spondoolies-Tech

Looking forward to using this.  I will post more photos at my unofficial thread.

https://bitcointalk.org/index.php?topic=872014.0


ps my email confirm came.

[RoadStress]

I am not SP marketing and this is just my private opinion.
I don't expect the network to significantly grow beyond 300PH. There is no new technology that will allow that that will ROI. People will have to invest same money into HW that they did in last year, but they will not get the same profit. I don't see people creating hundreds of PHs in the next 6 months.

Now stop and dont make me look stupid, difficulty.

Good prediction!

[Prelude]

Grrr.. I really want to pull the trigger on an SP31, but it doesn't make sense to me. For $1600 I could have 2x S4, running at 4.4TH overclocked. Or even better 3x for $2400 @ 6.6TH/s. Am I missing something besides the obvious increase in hardware quality, density, and customer support of SP over bitmain? 

[Guy Corem]

Hi All,

We have some special goodies for you.

From now until Monday the SP20 are only $695, shipping within 2 business days from the moment payment is confirmed.
http://www.spondoolies-tech.com/products/sp20-jackson-november-batch-2

In addition, we have a new product, the SP20 Mini Farm
http://www.spondoolies-tech.com/products/sp20-mini-farm-batch-1

This product is a pallet of 15 SP20. Ordering the mini farm gets you free shipping on all 15 units. Note that these units are not for reshipping.
The Mini Farm's price is tied to the single SP20 price so it is also on special sale right now.

You will also note that the SP31 is back and it's shipping from stock. In case you have forgotten, this is the most efficient miner of the bunch and it's only $2,995.
http://www.spondoolies-tech.com/products/sp31-yukon-shipping-from-stock

Lastly, we have a new batch of SP35 for delivery in December. As always, shipping will be done in accordance to the payment date:
http://www.spondoolies-tech.com/products/sp35-yukon-power-december-batch-1

The SP20 sale will end on Monday night.

Happy holiday!

Gadi

MUCH wow!

Who let the dog out ?

[Guy Corem]

... besides the obvious increase in hardware quality, density, and customer support of SP over bitmain? 

Thank you. We're working to increase our support workforce.

Guy

[raskul]

... besides the obvious increase in hardware quality, density, and customer support of SP over bitmain?  

Thank you. We're working to increase our support workforce.

Guy

because you need a photographer, one that lives in Scotland and likes to travel... right?

sorry. off topic. 

[edgar]

Grrr.. I really want to pull the trigger on an SP31, but it doesn't make sense to me. For $1600 I could have 2x S4, running at 4.4TH overclocked. Or even better 3x for $2400 @ 6.6TH/s. Am I missing something besides the obvious increase in hardware quality, density, and customer support of SP over bitmain? 

FUCK bitmain!

if you want shitty, thrown together hardware with the cheapest, overpriced components on the planet  - Bitmains got plenty - but don't be fooled by empty promises and costly RMA procedures which i can almost guarantee you will need.




if you want quality hardware with 'getting there' support - choose SPT without a doubt

my main gripe with SPT being fw discrepancies and a seemingly overworked support team of 1 (now 3)


just my humble opinion based on my own experiences - others opinions may vary

[Prelude]

... besides the obvious increase in hardware quality, density, and customer support of SP over bitmain? 

Thank you. We're working to increase our support workforce.

Guy

No, thank you, Guy. It's absolutely refreshing to see how you guys do business. It's the reason I'm considering spending more per GH with you guys.

Grrr.. I really want to pull the trigger on an SP31, but it doesn't make sense to me. For $1600 I could have 2x S4, running at 4.4TH overclocked. Or even better 3x for $2400 @ 6.6TH/s. Am I missing something besides the obvious increase in hardware quality, density, and customer support of SP over bitmain? 

FUCK bitmain!

if you want shitty, thrown together hardware with the cheapest, overpriced components on the planet  - Bitmains got plenty - but don't be fooled by empty promises and costly RMA procedures which i can almost guarantee you will need.




if you want quality hardware with 'getting there' support - choose SPT without a doubt

my main gripe with SPT being fw discrepancies and a seemingly overworked support team of 1 (now 3)


just my humble opinion based on my own experiences - others opinions may vary

Trust me, I hear you loud and clear. I'm stuck dealing with bitmain right now, for compensation and an rma for my latest S4 that came with a dead hash board. Dealing with them is horrible, like pulling teeth. I've got 4 other just about perfectly working S4s, though, and I can't really complain about them since their issues have mostly been resolved. Still a few bugs to squash and they'll be solid.

At the end of the day, ROI is still king though. I can get 8.8 TH/s for 200$ more if I go with S4s, vs 4.9 TH/s.

I really don't mean to thread shit SP, and I hope that's not how this is coming across. I'm legitimately trying to justify an SP31 and I'm hoping for someone to weigh in. It won't take much to be honest, if only to treat myself to the crème de la crème of Bitcoin hardware.

[Guy Corem]

Will the next difficulty jump be negative ?

http://bitcoin.sipa.be/growth.png
https://bitcoinwisdom.com/bitcoin/difficulty

[Biffa]

Will the next difficulty jump be negative ?

http://bitcoin.sipa.be/growth.png
https://bitcoinwisdom.com/bitcoin/difficulty

Shhh

[Biffa]

At the end of the day, ROI is still king though. I can get 8.8 TH/s for 200$ more if I go with S4s, vs 4.9 TH/s.

I really don't mean to thread shit SP, and I hope that's not how this is coming across. I'm legitimately trying to justify an SP31 and I'm hoping for someone to weigh in. It won't take much to be honest, if only to treat myself to the crème de la crème of Bitcoin hardware.

For me its also about hosting costs, it would cost 3 times as much to host 2 S4's as it would to host 1 SP35 because they take up 4TH@6U vs 5.5TH@2U

And 4.5 times as much for 3 of them 6TH@9U vs 5.5TH@2U

[Guy Corem]

Will the next difficulty jump be negative ?

http://bitcoin.sipa.be/growth.png
https://bitcoinwisdom.com/bitcoin/difficulty

Shhh

Not to wake the difficulty up ?

[klondike_bar]

Grrr.. I really want to pull the trigger on an SP31, but it doesn't make sense to me. For $1600 I could have 2x S4, running at 4.4TH overclocked. Or even better 3x for $2400 @ 6.6TH/s. Am I missing something besides the obvious increase in hardware quality, density, and customer support of SP over bitmain? 

FUCK bitmain!

if you want shitty, thrown together hardware with the cheapest, overpriced components on the planet  - Bitmains got plenty - but don't be fooled by empty promises and costly RMA procedures which i can almost guarantee you will need.

just my humble opinion based on my own experiences - others opinions may vary

Trust me, I hear you loud and clear. I'm stuck dealing with bitmain right now, for compensation and an rma for my latest S4 that came with a dead hash board. Dealing with them is horrible, like pulling teeth. I've got 4 other just about perfectly working S4s, though, and I can't really complain about them since their issues have mostly been resolved. Still a few bugs to squash and they'll be solid.

At the end of the day, ROI is still king though. I can get 8.8 TH/s for 200$ more if I go with S4s, vs 4.9 TH/s.

I really don't mean to thread shit SP, and I hope that's not how this is coming across. I'm legitimately trying to justify an SP31 and I'm hoping for someone to weigh in. It won't take much to be honest, if only to treat myself to the crème de la crème of Bitcoin hardware.

IMO the SP31 is overpriced - the SP20 however is in a sweet spot. The SP20 is now extremely competitive against bitmain S3+/C1 products, but the SP31 isnt very competitive against the S4. (granted, I expect a higher quality and denser product from the SP31 - but thats not worth the current premiums in price).

considering that the SP31 is roughly 3x SP20 in speed, but costs an additional ~$800 (which effectively includes 2 inbuilt power supplies) it seems that a price adjustment is due, perhaps down to ~$2400 (the included PSUs and rackmounting ability are worth a $300 premium i think). I know with this new price Im pulling the trigger for a single SP20 over the weekend, and looking VERY closely at the farm pack - which is almost a 10% discount by not paying shipping costs). The only thing holding me back is that hey won't easily rackmount and they are going to be louder than the antminers i have right now.

curious - can anyone compare the SP20 noise to the volume of a rockminer device fan (1.30A 120/38mm) as I found those fans to be too loud and eneded up swapping them all with fans from S1 units (1.0A fans - much lower pitch and volume). Having a "quiet" SP20 would be the deciding factor.

[raskul]

that's the raskul household set for winter  
it's been a while getting here, but here's the last part of my SP20 'vacation'

 

[Guy Corem]

that's the raskul household set for winter  
...

Wow!!!

[RealMalatesta]

that's the raskul household set for winter  
it's been a while getting here, but here's the last part of my SP20 'vacation'

 

Okay, by now I know how you convinced your wife to leave the SP20 in the apartment... calling Fleurop right now...