Claymore's CryptoNote AMD GPU Miner v11.3

[j2lcg2]

Hello,

This are my results whit 7 card rig ( 5xRX580+2xRX470 all bios moded )

With 9.7 
 Total H/S was 4690

With 10.2
 Total H/S is 4790

Had to increase virtual memory to 52000MB to fix error dk2a

So, is that ok?


Also with 9.7 i had no temperatures and fan speeds with 10.2 now that is working.

[Coin_Miner1]

getting poor performance (best 3500 h/s after running for 10 mins) and sometimes GPU hangs. Config default / No overclock.
C: Drive = 20,000mb paging file / D: Drive = 100,000mb paging file
4GB Ram / Intel Celeron 2 core GPU.



9.7 I get 5600 h/s no overclock 6000 h/s with overclock



Snip from 10.2 log


22:47:47:282   1a34   driver 10.0.2442.8
22:47:47:286   1a34   AMD Cards available: 8

22:47:50:287   1a34   GPU #0 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
22:47:50:664   1a34   GPU #1 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
22:47:51:022   1a34   GPU #2 algorithm ASM, -h 900, -dmem 1 (Memory used: 3780MB)
22:47:51:379   1a34   GPU #3 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
22:47:51:741   1a34   GPU #4 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
22:47:52:106   1a34   GPU #5 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
22:47:52:504   1a34   GPU #6 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
22:47:52:888   1a34   GPU #7 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
22:47:52:892   1a34   Total cards: 8

[stonebr]

Tested Claymore v10.2 on 8 rx 580 8 GB. Got the same hash rate 830-850 h/s per card as with sgminer-5.5.5. Will stay with sgminer-5.5.5 until see significant improvement in Claymore's miner

[rednoW]

Tested Claymore v10.2 on 8 rx 580 8 GB. Got the same hash rate 830-850 h/s per card as with sgminer-5.5.5. Will stay with sgminer-5.5.5 until see significant improvement in Claymore's miner

Yes, I moved back to my xmr-stak-amd with polaris 8gb cards. Little bit more pool-side hash (but I can be wrong).
Using Claymore's 10.2 with hawaii and polaris 4gb cards only.

[coinfoundry]

Tested Claymore v10.2 on 8 rx 580 8 GB. Got the same hash rate 830-850 h/s per card as with sgminer-5.5.5. Will stay with sgminer-5.5.5 until see significant improvement in Claymore's miner

That mirrors my own observations. Thanks for sharing.

[tuni]

What wrong with my MSI Afterbuner ?
https://drive.google.com/file/d/0B7Bc6ZeuUtjgV0V2V3ZmUml6cWM/view?usp=sharing

[NewbieMiner17]

if you need more details check here http://1stminingrig.com/claymores-cryptonote-amd-gpu-miner-v10-2-update-review/

You are killing noobs with your wrong environment vars setting in bat file )))

GPU_FORCE_64BIT_PTR 1
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

What should or shouldn't be there then?

[wingman1487]

if you need more details check here http://1stminingrig.com/claymores-cryptonote-amd-gpu-miner-v10-2-update-review/

You are killing noobs with your wrong environment vars setting in bat file )))

GPU_FORCE_64BIT_PTR 1
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

What should or shouldn't be there then?

setx needs to be added to the front of each line.

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

[l1xx]

this version is still with only 1 thread per vega  , right?

[UnclWish]

There is something wrong with 10.2 and Pitcairns.
On my 270X 4Gb with -dmem 1 and stock frequences 1070/1400 speed 515 h/s and about 50-75% incorrect shares. No rejects. Without -dmem 1 option card even with overclocking gives only 485 h/s maximum. I didn't check for incorrect shares.
On 9.7 with overclock i recieve 595 h/s and no rejects. Returning to 9.7 for now. Only 1 plus of 10.2 - it more power effective and card cooler and quieter.
Hope that Claymore fix this problem.

Claymore, made something with Pitcairn problem. Can you reduce devfee on 9.7 and add an -dmem 1 option?

[nutsnax]

Please add Aeon support! Thanks!

[yuslav]

Good miner 

[JuanHungLo]

Hey claymore lets tell us whats the speed for vega 56 and 64

I don't OC GPUs and use stock bios, don't enable HBCC, etc, so I get low speeds. For example, I see 1140H/s for stock Vega64.

That's bad. You'll see 2-thread gain with HBCC only ((( HBCC can be enabled easy with blockchain drivers. But if you have Frontier - that is a problem ))

For HBCC enabled with Vega56 or Vega64 be sure you have enough virtual memory, make clean uninstall of drivers (I used amd utiity), install blockchain drivers again, you will see HBCC slider in Gaming section

Hmm, Vega56 shows about 1400H/s in stock. So it seems Vega56 is faster than Vega64 for my PoW implementation. I really need more time to find the reason, so I will release new version in several hours and then will spend more time for Vega.

Claymore, how did you get Vega56 to 1400H/s?  No matter what I try I can't get above 1 KH/s

[egapega]

Hello,

im having problems with mining using my 6x RX560 2gb cards. i downloaded files as said in MinerGate faq.

after i run .bat file it loads all cards ect, but after a while and some succesfull shares i get these errors:

GPU 4, GpuMiner dk2a failed -4
GPU 5, GpuMiner dk2a failed -4
GPU 2, GpuMiner dk2a failed -4
GPU 4, GpuMiner dk2an0 failed -4
GPU 5, GpuMiner dk2an0 failed -4
GPU 2, GpuMiner dk2an0 failed -4
GPU 1, GpuMiner dk2a failed -4
GPU 4, GpuMiner dk2an0 failed -4
GPU 5, GpuMiner dk2an0 failed -4
GPU 2, GpuMiner dk2an0 failed -4
GPU 1, GpuMiner dk2an0 failed -4
GPU 4, GpuMiner dk2an0 failed -4
GPU 5, GpuMiner dk2an0 failed -4
GPU 2, GpuMiner dk2an0 failed -4
GPU 1, GpuMiner dk2an0 failed -4
GPU 1, GpuMiner dk2an0 failed -4

and it restarts miner.

any ideas what could be the reason?

[bostonvex]

Why don't you download the files from the first post in this topic? I wouldn't trust files from other locations.

For your errors, try this.

This version is not so easy to use because you have to adjust "-h" and "-dmem" values often, I will try to improve it soon.
1. "-dmem 1" requires twice more memory, make sure you have enough virtual memory. For example, if you have 6 GPUs 8GB, set virtual memory to 6*8=48GB.
2. Check how much memory miner allocates, it shows something like "(Memory used: 5128MB)", make sure you have this memory on your GPU.
3. You can see low hashrate if you use almost all memory on GPU, try to reduce "-h" value a bit.

[Maniac479]

Getting mostly rejected shares, low difficulty message

Everything was find for the first half hour or so, and then all my shares started getting rejected

Switched pools, same thing

Any help appreciated

Now it says all shares unauthenticated

developer message says to disconnect and stop mining

using 7000 series radeon card  Pitcairn 1024 mb available

[UnclWish]

Getting mostly rejected shares, low difficulty message

Everything was find for the first half hour or so, and then all my shares started getting rejected

Switched pools, same thing

Any help appreciated

Now it says all shares unauthenticated

developer message says to disconnect and stop mining

using 7000 series radeon card  Pitcairn 1024 mb available

Try to increase Windows virtual memory size to 8Gb per card.

[Maniac479]

Managed to figure out how to edit the bat file to include
environment settings. This might help a bit.

[Branko]

670 H/s with r9 380

Not bad

[adamvp]

Short question:
Are Claymore  voltage settings working with fixed blockchain  Amd drivers?