Bitcoin Forum
June 17, 2024, 10:23:50 AM *
News: Latest Bitcoin Core release: 27.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: « 1 ... 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 [239] 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 ... 326 »
  Print  
Author Topic: Claymore's CryptoNote AMD GPU Miner v11.3  (Read 2144943 times)
adaseb
Legendary
*
Offline Offline

Activity: 3794
Merit: 1723


View Profile
October 11, 2017, 08:46:41 PM
 #4761

Anyone have any configs for the AMD Tahiti's? (7950/ 7970/ 280x)?

Seems that the speed is identical to the older Claymore version.

And profitability seems identical between ZEC and XMR. However XMR might pull less power.
UnclWish
Sr. Member
****
Offline Offline

Activity: 1484
Merit: 253


View Profile
October 11, 2017, 09:41:50 PM
 #4762

Anyone have any configs for the AMD Tahiti's? (7950/ 7970/ 280x)?

Seems that the speed is identical to the older Claymore version.

And profitability seems identical between ZEC and XMR. However XMR might pull less power.
Just try to add an -dmem 1 option. It can increese speed.
adaseb
Legendary
*
Offline Offline

Activity: 3794
Merit: 1723


View Profile
October 11, 2017, 10:02:09 PM
 #4763

Anyone have any configs for the AMD Tahiti's? (7950/ 7970/ 280x)?

Seems that the speed is identical to the older Claymore version.

And profitability seems identical between ZEC and XMR. However XMR might pull less power.
Just try to add an -dmem 1 option. It can increese speed.

I did, doesn't do much. Exact same speed as Version 9.7

Using drivers 15.12
garytheasshole
Full Member
***
Offline Offline

Activity: 406
Merit: 105


Chosŏn Minjujuŭi Inmin Konghwaguk


View Profile WWW
October 11, 2017, 10:11:39 PM
 #4764

Anyone have any configs for the AMD Tahiti's? (7950/ 7970/ 280x)?

Seems that the speed is identical to the older Claymore version.

And profitability seems identical between ZEC and XMR. However XMR might pull less power.
Just try to add an -dmem 1 option. It can increese speed.

I did, doesn't do much. Exact same speed as Version 9.7

Using drivers 15.12

Same here on my 7990s

JuanHungLo
Hero Member
*****
Offline Offline

Activity: 935
Merit: 1001


I don't always drink...


View Profile
October 11, 2017, 10:40:13 PM
 #4765

Has anyone successfully installed and used Claymore 10.2 for XMR with these drivers in Win 7-64 https://bitcointalk.org/index.php?topic=2068446.0 with 4x Vega 56?  Or is Win 10 64 and Aug 28th Blockchain drivers essential?

Bull markets are born on pessimism, grow on skepticism, mature on optimism, and die on euphoria. - John Templeton
notbatman
Legendary
*
Offline Offline

Activity: 2212
Merit: 1038



View Profile
October 11, 2017, 10:49:04 PM
 #4766

v10.0 BETA:

- now miner uses the latest framework which is used for dual and zec miners. Therefore several new options are available.
- new assembler GPU kernels are used.
- added "-dmem" options that can improve performance in many cases. Note that twice more GPU memory is used in this mode.
- some old options were removed, some were renamed, please read Readme for detailed information and samples.
- reduced devfee, it's 1% now if you use secure SSL/TLS connection, 1.5% for unsecure connection.
- devfee mining is executed every hour, similar to dual and zec miners.
- a lot of minor improvements.

PS. Linux version will be available in a day.

After two weeks of waiting patiently...

Hi Calymore,
Do you have any ETA on version for linux ? Smiley
My users are waiting for Your release Smiley and many other part of the word Smiley
Thx for you well done job in all miners !

Pretty sure he said he's discontinuing it due to loss of the source or something.

Seriously?  Cry Cry Cry
sir4o
Newbie
*
Offline Offline

Activity: 67
Merit: 0


View Profile
October 12, 2017, 08:44:36 AM
 #4767

Has anyone successfully installed and used Claymore 10.2 for XMR with these drivers in Win 7-64 https://bitcointalk.org/index.php?topic=2068446.0 with 4x Vega 56?  Or is Win 10 64 and Aug 28th Blockchain drivers essential?

For XMR, I don't think the blockchain drivers help your hash speed.
Check you motherboard bios settings, that's usually the problem with mining.



I think they do help as the new Claymore version was optimized for these drivers. I'm using the blockchain drivers and at least for me switching from 9.7 has brought 15% improvement while reducing the wattage.
nowaltcoin
Full Member
***
Offline Offline

Activity: 158
Merit: 100


View Profile
October 12, 2017, 07:23:41 PM
Last edit: October 18, 2017, 09:49:17 AM by nowaltcoin
 #4768

@claymore go ahead !!

really fine work with version 10.2 !

Please in 10.3 support for my old HD7790 (bonaire)

and for all the other complaining about the new miner:

after some hours testing:

due to the tipps and hints i found here i'd like to share my results and settings:

Mining XMR at Nanopool

Rig one:

Windows 7 Home Premium 64 bit
AMD-Driver 15.300.1025.1001
SGMiner-GM 5.5.5-8

2 * R9 270 2G
(sapphire)  ri:340 ws:4 gt:2     345 H/s each
1 * HD 7850 2G (XFX) ri:256 ws:4 gt:2     320 H/s
----------------------------------------------------------------------------------------- Rig total 1010 H/s
---- with Claymore's CryptoNote AMD GPU Miner v10.2    ------------------------- Rig total 1230 H/s
--------------- minus 15 % incorrect shares ------------------------------------------ minus 185 H/s
---- with Claymore's CryptoNote AMD GPU Miner v10.2    -------------------------- Rig total 1045 H/s

Rig two:

Windows 7  Ultimate 64 bit
AMD-Driver 15.300.1025.0
SGMiner-GM 5.5.5-8

4 * HD 7850 2G  ( HIS ICEQ X) ri:256 ws:4 gt:2     330 H/s each
------------------------------------------------------------------------------------------ Rig total 1320 H/s
---- with Claymore's CryptoNote AMD GPU Miner v10.2    -------------------------- Rig total 1625 H/s
--------------- minus 25 % incorrect shares ------------------------------------------ minus 400 H/s
---- with Claymore's CryptoNote AMD GPU Miner v10.2    -------------------------- Rig total 1225 H/s

Rig three:

Windows 8.1 Pro 64 bit
AMD-Driver 21.19.155.257 (6 GPU-Patch)
SGMiner-GM 5.5.5-8

6 * HD 7790 1G (HIS/ASUS/XFX) ri:192 ws:4 gt:2     204 H/s each
------------------------------------------------------------------------------------------- Rig total 1230 H/s
---- with Claymore's CryptoNote AMD GPU Miner v9.7        ------------------------- Rig total 1200 H/s


---------------------> All rigs : 3560 H/s
---------------------> Power at the wall: 1240 watt
----with 10.2-------> All rigs : 4050 H/s
-------minus-------> minus : 585 H/s
---------=---------> All rigs : 3465 H/s
--------------------> Power at the wall: 1215 watt

Have a nice day

8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org
12 * GPU's mining ETN/Sumocoin
You like to mine something different: https://deutsche-emark.de/
Vann
Hero Member
*****
Offline Offline

Activity: 1036
Merit: 606



View Profile
October 12, 2017, 08:24:07 PM
 #4769

Quote
Rig two:

Windows 7 Home Ultimate 64 bit
AMD-Driver 15.300.1025.0
SGMiner-GM 5.5.5-8

4 * HD 7850 2G  ( HIS ICEQ X) ri:256 ws:4 gt:2     330 H/s each
------------------------------------------------------------------------------------------ Rig total 1320 H/s
---- with Claymore's CryptoNote AMD GPU Miner v10.2    -------------------------- Rig total 1625 H/s

My Powercolor HD 7850 2GB card does 520 H/s with the Claymore v9.7 miner. With the v10.2, the best I could do was 515 H/s. I switched back to the v9.7 miner, but unfortunately it has problems reading the fan speed and temperature with the blockchain drivers and it sometimes hangs Windows while trying to restart the miner.

Quote
16:13:38:853   1bdc   WATCHDOG: GPU memory error, you need to restart miner Sad
16:13:38:853   1bdc   Failed to get OverdriveN capabilities
16:13:39:869   1bdc   Restarting OK, exit...



UnclWish
Sr. Member
****
Offline Offline

Activity: 1484
Merit: 253


View Profile
October 12, 2017, 08:54:21 PM
 #4770

@nowaltcoin, your sgminer-gm settings wrong and your speeds for your cards are too low.
On 270X 4Gb on Claymore 9.7 I have 495-500 h/s, sgminer 515-520. Claymore 10.2 with dmem 1 gives 530 h/s but too many incorrect shares. Without dmem 1 10.2 gives only 485-490 h/s.
On 280X(7870) on Claymore 9.7 I have 695 h/s, sgminer-gm - 675 h/s.

Try on 270/370 and other analog cards with sgminer xintensity 460 worksize 8 gputhreads 2.
Call_Me_Bambi
Sr. Member
****
Offline Offline

Activity: 574
Merit: 261


View Profile
October 13, 2017, 12:07:52 AM
 #4771

Has anyone successfully installed and used Claymore 10.2 for XMR with these drivers in Win 7-64 https://bitcointalk.org/index.php?topic=2068446.0 with 4x Vega 56?  Or is Win 10 64 and Aug 28th Blockchain drivers essential?

For XMR, I don't think the blockchain drivers help your hash speed.
Check you motherboard bios settings, that's usually the problem with mining.



I think they do help as the new Claymore version was optimized for these drivers. I'm using the blockchain drivers and at least for me switching from 9.7 has brought 15% improvement while reducing the wattage.

I have to add a "Me to" here as I was mining XMR on the 17.7.1 AMD drivers and whan I changed to the Blockchain drivers there was a noticable increase in hashrate. This is on a Windows 10 pro x64 machine.
Dodonpa
Newbie
*
Offline Offline

Activity: 6
Merit: 0


View Profile
October 13, 2017, 12:51:13 AM
 #4772

Claymore - Possible bug.

With 10.2 Beta I am getting incorrect shares on my two Gigabyte 270 OC (Pitcairn) (non X)

I'm using the stock settings (-h 512) on non-overclocked cards.  9.7 did/does not give incorrect shares.

For me, this miner, for the old cards type 7850(1,2gb), 270(x), 280(x) is totally unusable, unfortunately. 15-30% less hash from clay9.7 version and too manny low diff share.

I spend 40 hours of my life trying to install it properly  that at least I get at least the same hash rate, but , it's not worth it. 7850 with 1 GB of memory and 7950 remain on clay9.7, the rest on kachur miner

My two 270s get 422 and 456h/s respectively when I engage the overclock settings.  No other miner provides me with anything near that.   



I have the same gigabyte cards.

9.7 provides me with better hashrates.  860h/s between my two 270 versus 840h/s with 10.2.   I'm not running blockchain drivers though on this particular computer, I use this workstation for photo/video editing and I don't know how much the blockchain drivers will affect performance for that.




xfx and msi 270x,  claymore 10.2 show me a lot this message:

GPU0 found incorrect share. If you see this message often, make sure you that you did not overclock it too much, also try to reduce "-h" value.

i ran a test for the msi with everything in stock -h 512 and get this results:

15:46:07:999   10a4   GPU #0: Pitcairn, 2048 MB available, 20 compute units
15:46:07:999   10a4   GPU #0 recognized as Radeon 270/270X
15:46:07:999   10a4   card 0, m1 2048, m2 1791 w 160
15:46:07:999   10a4   0 m = 2
15:46:08:421   10a4   GPU #0 algorithm ASM, -h 512, -dmem 0 (Memory used: 1075MB)


16:13:16:690   12a8   GPU #0: Pitcairn
16:13:16:690   12a8   XMR - Total Speed: 449 H/s, Total Shares: 115, Rejected: 0, Time: 00:26
16:13:16:690   12a8   XMR: GPU0 449 H/s
16:13:16:690   12a8   Incorrect XMR shares: GPU0 16
16:13:16:690   12a8   1 minute average XMR total speed: 446 H/s


with -dmem 1 the miner drop the hashs 376 Hash/s

with the v9.7 the hash with -a 4 was 445 H/s - 461 hash/sol max

i still going to check options for this two r9 270x, if anyone like share any results for this card
infojunkiePHD
Newbie
*
Offline Offline

Activity: 49
Merit: 0


View Profile
October 13, 2017, 01:25:46 AM
 #4773

Claymore - Possible bug.

With 10.2 Beta I am getting incorrect shares on my two Gigabyte 270 OC (Pitcairn) (non X)

I'm using the stock settings (-h 512) on non-overclocked cards.  9.7 did/does not give incorrect shares.

For me, this miner, for the old cards type 7850(1,2gb), 270(x), 280(x) is totally unusable, unfortunately. 15-30% less hash from clay9.7 version and too manny low diff share.

I spend 40 hours of my life trying to install it properly  that at least I get at least the same hash rate, but , it's not worth it. 7850 with 1 GB of memory and 7950 remain on clay9.7, the rest on kachur miner

My two 270s get 422 and 456h/s respectively when I engage the overclock settings.  No other miner provides me with anything near that.   




I have the same gigabyte cards.

9.7 provides me with better hashrates.  860h/s between my two 270 versus 840h/s with 10.2.   I'm not running blockchain drivers though on this particular computer, I use this workstation for photo/video editing and I don't know how much the blockchain drivers will affect performance for that.




xfx and msi 270x,  claymore 10.2 show me a lot this message:

GPU0 found incorrect share. If you see this message often, make sure you that you did not overclock it too much, also try to reduce "-h" value.

i ran a test for the msi with everything in stock -h 512 and get this results:

15:46:07:999   10a4   GPU #0: Pitcairn, 2048 MB available, 20 compute units
15:46:07:999   10a4   GPU #0 recognized as Radeon 270/270X
15:46:07:999   10a4   card 0, m1 2048, m2 1791 w 160
15:46:07:999   10a4   0 m = 2
15:46:08:421   10a4   GPU #0 algorithm ASM, -h 512, -dmem 0 (Memory used: 1075MB)


16:13:16:690   12a8   GPU #0: Pitcairn
16:13:16:690   12a8   XMR - Total Speed: 449 H/s, Total Shares: 115, Rejected: 0, Time: 00:26
16:13:16:690   12a8   XMR: GPU0 449 H/s
16:13:16:690   12a8   Incorrect XMR shares: GPU0 16
16:13:16:690   12a8   1 minute average XMR total speed: 446 H/s


with -dmem 1 the miner drop the hashs 376 Hash/s

with the v9.7 the hash with -a 4 was 445 H/s - 461 hash/sol max

i still going to check options for this two r9 270x, if anyone like share any results for this card

I switched back to using 9.7. While I got a 2% increase in hashrate, it was pointless because I had an incorrect share rate of 12-15%, no matter if overclocked or not.  I'm just waiting patiently for 10.3/11.  Though it would be nice if Claymore reduced the rate in 9.7 to be in line with 10.2.

notbatman
Legendary
*
Offline Offline

Activity: 2212
Merit: 1038



View Profile
October 13, 2017, 12:53:31 PM
 #4774

^^^ Windozzz is not an appropriate mining platform...

Claymore dude, what's going on???
nowaltcoin
Full Member
***
Offline Offline

Activity: 158
Merit: 100


View Profile
October 13, 2017, 01:10:38 PM
 #4775

@nowaltcoin, your sgminer-gm settings wrong and your speeds for your cards are too low.
On 270X 4Gb on Claymore 9.7 I have 495-500 h/s, sgminer 515-520. Claymore 10.2 with dmem 1 gives 530 h/s but too many incorrect shares. Without dmem 1 10.2 gives only 485-490 h/s.
On 280X(7870) on Claymore 9.7 I have 695 h/s, sgminer-gm - 675 h/s.

Try on 270/370 and other analog cards with sgminer xintensity 460 worksize 8 gputhreads 2.

i dont think so!

This may work stable for your 4GB Cards, but keep in mind I'am using only 1/2GB Cards.

If you look into the physics of the cards (numbers of Shading Clusters /ROP/TMU/ALU) you will see the right numbers!

for a
HD 7790 1Gb (max stable working) rawintensity 196 with 2 Threads and rawintensity 224 with 1 thread (you can play with the worksize)
HD 7850 2GB (max stable working) rawintensity 256 with 2 Threads and rawintensity 512 with 1 thread (you can play with worksize)
R9 270 2GB (max stable working) rawintensity 400 with 2 Threads and rawintensity 640 with 1 thread (you can play with worksize)

you can see these limits (lack of gpu memory) with Claymore 10.2 ! on these cards

HD 7790 Claymore 10.2 is not running (missing asm)
HD 7850 2GB with  -h 512 dmem 0 (1075) with -h 512 dmem 1 (more than 2GB !!)
R 9 270 2GB with  -h 512 dmem 0 (1075) with -h 512 dmem 1 (more than 2GB !!)

and after all you can not use all of the gpu memory you can use only up to 1791 MB for the 2 GB cards!

have a nice day



8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org
12 * GPU's mining ETN/Sumocoin
You like to mine something different: https://deutsche-emark.de/
mul44
Member
**
Offline Offline

Activity: 105
Merit: 10


View Profile
October 13, 2017, 02:55:31 PM
 #4776

On rx460-4gb it works well, 350 hashes, on version 9.7 it was 325, but on rx550-2gb version 10 does not work - writes that the error with ASM
adaseb
Legendary
*
Offline Offline

Activity: 3794
Merit: 1723


View Profile
October 13, 2017, 06:57:59 PM
 #4777

@nowaltcoin, your sgminer-gm settings wrong and your speeds for your cards are too low.
On 270X 4Gb on Claymore 9.7 I have 495-500 h/s, sgminer 515-520. Claymore 10.2 with dmem 1 gives 530 h/s but too many incorrect shares. Without dmem 1 10.2 gives only 485-490 h/s.
On 280X(7870) on Claymore 9.7 I have 695 h/s, sgminer-gm - 675 h/s.

Try on 270/370 and other analog cards with sgminer xintensity 460 worksize 8 gputhreads 2.

What clock/mem are you using to get 695 h/s on your 280x? The most I can get out of mine is about 615
Claymore (OP)
Donator
Legendary
*
Offline Offline

Activity: 1610
Merit: 1325

Miners developer


View Profile
October 13, 2017, 08:04:34 PM
 #4778

v10.0 BETA:

- now miner uses the latest framework which is used for dual and zec miners. Therefore several new options are available.
- new assembler GPU kernels are used.
- added "-dmem" options that can improve performance in many cases. Note that twice more GPU memory is used in this mode.
- some old options were removed, some were renamed, please read Readme for detailed information and samples.
- reduced devfee, it's 1% now if you use secure SSL/TLS connection, 1.5% for unsecure connection.
- devfee mining is executed every hour, similar to dual and zec miners.
- a lot of minor improvements.

PS. Linux version will be available in a day.

After two weeks of waiting patiently...

I'm on a trip (unexpected), I'm sorry for the delay with Linux version. I will be back in two days and will release Linux version asap.

Please read Readme and FAQ in the first post of this thread before asking any questions, probably the answer is already there.
List of my miners: https://bitcointalk.org/index.php?topic=3019607
UnclWish
Sr. Member
****
Offline Offline

Activity: 1484
Merit: 253


View Profile
October 13, 2017, 09:44:37 PM
 #4779

@nowaltcoin, your sgminer-gm settings wrong and your speeds for your cards are too low.
On 270X 4Gb on Claymore 9.7 I have 495-500 h/s, sgminer 515-520. Claymore 10.2 with dmem 1 gives 530 h/s but too many incorrect shares. Without dmem 1 10.2 gives only 485-490 h/s.
On 280X(7870) on Claymore 9.7 I have 695 h/s, sgminer-gm - 675 h/s.

Try on 270/370 and other analog cards with sgminer xintensity 460 worksize 8 gputhreads 2.

What clock/mem are you using to get 695 h/s on your 280x? The most I can get out of mine is about 615
Patched bios with Stilt's stripes. Core/Mem - 1175/1675.
disodium
Newbie
*
Offline Offline

Activity: 16
Merit: 0


View Profile
October 14, 2017, 01:59:57 PM
 #4780

Claymore, please add option to disable asm kernels. I have a mixed 470 4gb rig with two HIS cards, they tend to fail on asm kernels with AMD blockchain drivers on any of your miners. On Ethash miner, however, I can disable asm kernels for these cards, but as of now there's no such option on CryptoNight miner.
Pages: « 1 ... 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 [239] 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 ... 326 »
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!