adaseb
Legendary
Offline
Activity: 3878
Merit: 1733
|
|
October 11, 2017, 08:46:41 PM |
|
Anyone have any configs for the AMD Tahiti's? (7950/ 7970/ 280x)?
Seems that the speed is identical to the older Claymore version.
And profitability seems identical between ZEC and XMR. However XMR might pull less power.
|
|
|
|
UnclWish
|
|
October 11, 2017, 09:41:50 PM |
|
Anyone have any configs for the AMD Tahiti's? (7950/ 7970/ 280x)?
Seems that the speed is identical to the older Claymore version.
And profitability seems identical between ZEC and XMR. However XMR might pull less power.
Just try to add an -dmem 1 option. It can increese speed.
|
|
|
|
adaseb
Legendary
Offline
Activity: 3878
Merit: 1733
|
|
October 11, 2017, 10:02:09 PM |
|
Anyone have any configs for the AMD Tahiti's? (7950/ 7970/ 280x)?
Seems that the speed is identical to the older Claymore version.
And profitability seems identical between ZEC and XMR. However XMR might pull less power.
Just try to add an -dmem 1 option. It can increese speed. I did, doesn't do much. Exact same speed as Version 9.7 Using drivers 15.12
|
|
|
|
garytheasshole
Full Member
Offline
Activity: 406
Merit: 105
Chosŏn Minjujuŭi Inmin Konghwaguk
|
|
October 11, 2017, 10:11:39 PM |
|
Anyone have any configs for the AMD Tahiti's? (7950/ 7970/ 280x)?
Seems that the speed is identical to the older Claymore version.
And profitability seems identical between ZEC and XMR. However XMR might pull less power.
Just try to add an -dmem 1 option. It can increese speed. I did, doesn't do much. Exact same speed as Version 9.7 Using drivers 15.12 Same here on my 7990s
|
|
|
|
JuanHungLo
|
|
October 11, 2017, 10:40:13 PM |
|
Has anyone successfully installed and used Claymore 10.2 for XMR with these drivers in Win 7-64 https://bitcointalk.org/index.php?topic=2068446.0 with 4x Vega 56? Or is Win 10 64 and Aug 28th Blockchain drivers essential?
|
Bull markets are born on pessimism, grow on skepticism, mature on optimism, and die on euphoria. - John Templeton
|
|
|
notbatman
Legendary
Offline
Activity: 2212
Merit: 1038
|
|
October 11, 2017, 10:49:04 PM |
|
v10.0 BETA:
- now miner uses the latest framework which is used for dual and zec miners. Therefore several new options are available. - new assembler GPU kernels are used. - added "-dmem" options that can improve performance in many cases. Note that twice more GPU memory is used in this mode. - some old options were removed, some were renamed, please read Readme for detailed information and samples. - reduced devfee, it's 1% now if you use secure SSL/TLS connection, 1.5% for unsecure connection. - devfee mining is executed every hour, similar to dual and zec miners. - a lot of minor improvements.
PS. Linux version will be available in a day.
After two weeks of waiting patiently... Hi Calymore, Do you have any ETA on version for linux ? My users are waiting for Your release and many other part of the word Thx for you well done job in all miners ! Pretty sure he said he's discontinuing it due to loss of the source or something. Seriously?
|
|
|
|
sir4o
Newbie
Offline
Activity: 67
Merit: 0
|
|
October 12, 2017, 08:44:36 AM |
|
For XMR, I don't think the blockchain drivers help your hash speed. Check you motherboard bios settings, that's usually the problem with mining. I think they do help as the new Claymore version was optimized for these drivers. I'm using the blockchain drivers and at least for me switching from 9.7 has brought 15% improvement while reducing the wattage.
|
|
|
|
nowaltcoin
|
|
October 12, 2017, 07:23:41 PM Last edit: October 18, 2017, 09:49:17 AM by nowaltcoin |
|
@claymore go ahead !!
really fine work with version 10.2 !
Please in 10.3 support for my old HD7790 (bonaire)
and for all the other complaining about the new miner:
after some hours testing:
due to the tipps and hints i found here i'd like to share my results and settings:
Mining XMR at Nanopool
Rig one:
Windows 7 Home Premium 64 bit AMD-Driver 15.300.1025.1001 SGMiner-GM 5.5.5-8
2 * R9 270 2G (sapphire) ri:340 ws:4 gt:2 345 H/s each 1 * HD 7850 2G (XFX) ri:256 ws:4 gt:2 320 H/s ----------------------------------------------------------------------------------------- Rig total 1010 H/s ---- with Claymore's CryptoNote AMD GPU Miner v10.2 ------------------------- Rig total 1230 H/s --------------- minus 15 % incorrect shares ------------------------------------------ minus 185 H/s ---- with Claymore's CryptoNote AMD GPU Miner v10.2 -------------------------- Rig total 1045 H/s
Rig two:
Windows 7 Ultimate 64 bit AMD-Driver 15.300.1025.0 SGMiner-GM 5.5.5-8
4 * HD 7850 2G ( HIS ICEQ X) ri:256 ws:4 gt:2 330 H/s each ------------------------------------------------------------------------------------------ Rig total 1320 H/s ---- with Claymore's CryptoNote AMD GPU Miner v10.2 -------------------------- Rig total 1625 H/s --------------- minus 25 % incorrect shares ------------------------------------------ minus 400 H/s ---- with Claymore's CryptoNote AMD GPU Miner v10.2 -------------------------- Rig total 1225 H/s
Rig three:
Windows 8.1 Pro 64 bit AMD-Driver 21.19.155.257 (6 GPU-Patch) SGMiner-GM 5.5.5-8
6 * HD 7790 1G (HIS/ASUS/XFX) ri:192 ws:4 gt:2 204 H/s each ------------------------------------------------------------------------------------------- Rig total 1230 H/s ---- with Claymore's CryptoNote AMD GPU Miner v9.7 ------------------------- Rig total 1200 H/s
---------------------> All rigs : 3560 H/s ---------------------> Power at the wall: 1240 watt ----with 10.2-------> All rigs : 4050 H/s -------minus-------> minus : 585 H/s ---------=---------> All rigs : 3465 H/s --------------------> Power at the wall: 1215 watt
Have a nice day
|
8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org 12 * GPU's mining ETN/Sumocoin You like to mine something different: https://deutsche-emark.de/
|
|
|
Vann
|
|
October 12, 2017, 08:24:07 PM |
|
Rig two:
Windows 7 Home Ultimate 64 bit AMD-Driver 15.300.1025.0 SGMiner-GM 5.5.5-8
4 * HD 7850 2G ( HIS ICEQ X) ri:256 ws:4 gt:2 330 H/s each ------------------------------------------------------------------------------------------ Rig total 1320 H/s ---- with Claymore's CryptoNote AMD GPU Miner v10.2 -------------------------- Rig total 1625 H/s My Powercolor HD 7850 2GB card does 520 H/s with the Claymore v9.7 miner. With the v10.2, the best I could do was 515 H/s. I switched back to the v9.7 miner, but unfortunately it has problems reading the fan speed and temperature with the blockchain drivers and it sometimes hangs Windows while trying to restart the miner. 16:13:38:853 1bdc WATCHDOG: GPU memory error, you need to restart miner 16:13:38:853 1bdc Failed to get OverdriveN capabilities 16:13:39:869 1bdc Restarting OK, exit...
|
|
|
|
UnclWish
|
|
October 12, 2017, 08:54:21 PM |
|
@nowaltcoin, your sgminer-gm settings wrong and your speeds for your cards are too low. On 270X 4Gb on Claymore 9.7 I have 495-500 h/s, sgminer 515-520. Claymore 10.2 with dmem 1 gives 530 h/s but too many incorrect shares. Without dmem 1 10.2 gives only 485-490 h/s. On 280X(7870) on Claymore 9.7 I have 695 h/s, sgminer-gm - 675 h/s.
Try on 270/370 and other analog cards with sgminer xintensity 460 worksize 8 gputhreads 2.
|
|
|
|
Call_Me_Bambi
|
|
October 13, 2017, 12:07:52 AM |
|
For XMR, I don't think the blockchain drivers help your hash speed. Check you motherboard bios settings, that's usually the problem with mining. I think they do help as the new Claymore version was optimized for these drivers. I'm using the blockchain drivers and at least for me switching from 9.7 has brought 15% improvement while reducing the wattage. I have to add a "Me to" here as I was mining XMR on the 17.7.1 AMD drivers and whan I changed to the Blockchain drivers there was a noticable increase in hashrate. This is on a Windows 10 pro x64 machine.
|
|
|
|
Dodonpa
Newbie
Offline
Activity: 6
Merit: 0
|
|
October 13, 2017, 12:51:13 AM |
|
Claymore - Possible bug.
With 10.2 Beta I am getting incorrect shares on my two Gigabyte 270 OC (Pitcairn) (non X)
I'm using the stock settings (-h 512) on non-overclocked cards. 9.7 did/does not give incorrect shares.
For me, this miner, for the old cards type 7850(1,2gb), 270(x), 280(x) is totally unusable, unfortunately. 15-30% less hash from clay9.7 version and too manny low diff share. I spend 40 hours of my life trying to install it properly that at least I get at least the same hash rate, but , it's not worth it. 7850 with 1 GB of memory and 7950 remain on clay9.7, the rest on kachur miner My two 270s get 422 and 456h/s respectively when I engage the overclock settings. No other miner provides me with anything near that. I have the same gigabyte cards. 9.7 provides me with better hashrates. 860h/s between my two 270 versus 840h/s with 10.2. I'm not running blockchain drivers though on this particular computer, I use this workstation for photo/video editing and I don't know how much the blockchain drivers will affect performance for that. xfx and msi 270x, claymore 10.2 show me a lot this message: GPU0 found incorrect share. If you see this message often, make sure you that you did not overclock it too much, also try to reduce "-h" value.i ran a test for the msi with everything in stock -h 512 and get this results: 15:46:07:999 10a4 GPU #0: Pitcairn, 2048 MB available, 20 compute units 15:46:07:999 10a4 GPU #0 recognized as Radeon 270/270X 15:46:07:999 10a4 card 0, m1 2048, m2 1791 w 160 15:46:07:999 10a4 0 m = 2 15:46:08:421 10a4 GPU #0 algorithm ASM, -h 512, -dmem 0 (Memory used: 1075MB)
16:13:16:690 12a8 GPU #0: Pitcairn 16:13:16:690 12a8 XMR - Total Speed: 449 H/s, Total Shares: 115, Rejected: 0, Time: 00:26 16:13:16:690 12a8 XMR: GPU0 449 H/s 16:13:16:690 12a8 Incorrect XMR shares: GPU0 16 16:13:16:690 12a8 1 minute average XMR total speed: 446 H/swith -dmem 1 the miner drop the hashs 376 Hash/s with the v9.7 the hash with -a 4 was 445 H/s - 461 hash/sol max i still going to check options for this two r9 270x, if anyone like share any results for this card
|
|
|
|
infojunkiePHD
Newbie
Offline
Activity: 49
Merit: 0
|
|
October 13, 2017, 01:25:46 AM |
|
Claymore - Possible bug.
With 10.2 Beta I am getting incorrect shares on my two Gigabyte 270 OC (Pitcairn) (non X)
I'm using the stock settings (-h 512) on non-overclocked cards. 9.7 did/does not give incorrect shares.
For me, this miner, for the old cards type 7850(1,2gb), 270(x), 280(x) is totally unusable, unfortunately. 15-30% less hash from clay9.7 version and too manny low diff share. I spend 40 hours of my life trying to install it properly that at least I get at least the same hash rate, but , it's not worth it. 7850 with 1 GB of memory and 7950 remain on clay9.7, the rest on kachur miner My two 270s get 422 and 456h/s respectively when I engage the overclock settings. No other miner provides me with anything near that. I have the same gigabyte cards. 9.7 provides me with better hashrates. 860h/s between my two 270 versus 840h/s with 10.2. I'm not running blockchain drivers though on this particular computer, I use this workstation for photo/video editing and I don't know how much the blockchain drivers will affect performance for that. xfx and msi 270x, claymore 10.2 show me a lot this message: GPU0 found incorrect share. If you see this message often, make sure you that you did not overclock it too much, also try to reduce "-h" value.i ran a test for the msi with everything in stock -h 512 and get this results: 15:46:07:999 10a4 GPU #0: Pitcairn, 2048 MB available, 20 compute units 15:46:07:999 10a4 GPU #0 recognized as Radeon 270/270X 15:46:07:999 10a4 card 0, m1 2048, m2 1791 w 160 15:46:07:999 10a4 0 m = 2 15:46:08:421 10a4 GPU #0 algorithm ASM, -h 512, -dmem 0 (Memory used: 1075MB)
16:13:16:690 12a8 GPU #0: Pitcairn 16:13:16:690 12a8 XMR - Total Speed: 449 H/s, Total Shares: 115, Rejected: 0, Time: 00:26 16:13:16:690 12a8 XMR: GPU0 449 H/s 16:13:16:690 12a8 Incorrect XMR shares: GPU0 16 16:13:16:690 12a8 1 minute average XMR total speed: 446 H/swith -dmem 1 the miner drop the hashs 376 Hash/s with the v9.7 the hash with -a 4 was 445 H/s - 461 hash/sol max i still going to check options for this two r9 270x, if anyone like share any results for this card I switched back to using 9.7. While I got a 2% increase in hashrate, it was pointless because I had an incorrect share rate of 12-15%, no matter if overclocked or not. I'm just waiting patiently for 10.3/11. Though it would be nice if Claymore reduced the rate in 9.7 to be in line with 10.2.
|
|
|
|
notbatman
Legendary
Offline
Activity: 2212
Merit: 1038
|
|
October 13, 2017, 12:53:31 PM |
|
^^^ Windozzz is not an appropriate mining platform...
Claymore dude, what's going on???
|
|
|
|
nowaltcoin
|
|
October 13, 2017, 01:10:38 PM |
|
@nowaltcoin, your sgminer-gm settings wrong and your speeds for your cards are too low. On 270X 4Gb on Claymore 9.7 I have 495-500 h/s, sgminer 515-520. Claymore 10.2 with dmem 1 gives 530 h/s but too many incorrect shares. Without dmem 1 10.2 gives only 485-490 h/s. On 280X(7870) on Claymore 9.7 I have 695 h/s, sgminer-gm - 675 h/s.
Try on 270/370 and other analog cards with sgminer xintensity 460 worksize 8 gputhreads 2.
i dont think so! This may work stable for your 4GB Cards, but keep in mind I'am using only 1/2GB Cards. If you look into the physics of the cards (numbers of Shading Clusters /ROP/TMU/ALU) you will see the right numbers! for a HD 7790 1Gb (max stable working) rawintensity 196 with 2 Threads and rawintensity 224 with 1 thread (you can play with the worksize) HD 7850 2GB (max stable working) rawintensity 256 with 2 Threads and rawintensity 512 with 1 thread (you can play with worksize) R9 270 2GB (max stable working) rawintensity 400 with 2 Threads and rawintensity 640 with 1 thread (you can play with worksize) you can see these limits (lack of gpu memory) with Claymore 10.2 ! on these cards HD 7790 Claymore 10.2 is not running (missing asm) HD 7850 2GB with -h 512 dmem 0 (1075) with -h 512 dmem 1 (more than 2GB !!) R 9 270 2GB with -h 512 dmem 0 (1075) with -h 512 dmem 1 (more than 2GB !!) and after all you can not use all of the gpu memory you can use only up to 1791 MB for the 2 GB cards! have a nice day
|
8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org 12 * GPU's mining ETN/Sumocoin You like to mine something different: https://deutsche-emark.de/
|
|
|
mul44
Member
Offline
Activity: 105
Merit: 10
|
|
October 13, 2017, 02:55:31 PM |
|
On rx460-4gb it works well, 350 hashes, on version 9.7 it was 325, but on rx550-2gb version 10 does not work - writes that the error with ASM
|
|
|
|
adaseb
Legendary
Offline
Activity: 3878
Merit: 1733
|
|
October 13, 2017, 06:57:59 PM |
|
@nowaltcoin, your sgminer-gm settings wrong and your speeds for your cards are too low. On 270X 4Gb on Claymore 9.7 I have 495-500 h/s, sgminer 515-520. Claymore 10.2 with dmem 1 gives 530 h/s but too many incorrect shares. Without dmem 1 10.2 gives only 485-490 h/s. On 280X(7870) on Claymore 9.7 I have 695 h/s, sgminer-gm - 675 h/s.
Try on 270/370 and other analog cards with sgminer xintensity 460 worksize 8 gputhreads 2.
What clock/mem are you using to get 695 h/s on your 280x? The most I can get out of mine is about 615
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
October 13, 2017, 08:04:34 PM |
|
v10.0 BETA:
- now miner uses the latest framework which is used for dual and zec miners. Therefore several new options are available. - new assembler GPU kernels are used. - added "-dmem" options that can improve performance in many cases. Note that twice more GPU memory is used in this mode. - some old options were removed, some were renamed, please read Readme for detailed information and samples. - reduced devfee, it's 1% now if you use secure SSL/TLS connection, 1.5% for unsecure connection. - devfee mining is executed every hour, similar to dual and zec miners. - a lot of minor improvements.
PS. Linux version will be available in a day.
After two weeks of waiting patiently... I'm on a trip (unexpected), I'm sorry for the delay with Linux version. I will be back in two days and will release Linux version asap.
|
|
|
|
UnclWish
|
|
October 13, 2017, 09:44:37 PM |
|
@nowaltcoin, your sgminer-gm settings wrong and your speeds for your cards are too low. On 270X 4Gb on Claymore 9.7 I have 495-500 h/s, sgminer 515-520. Claymore 10.2 with dmem 1 gives 530 h/s but too many incorrect shares. Without dmem 1 10.2 gives only 485-490 h/s. On 280X(7870) on Claymore 9.7 I have 695 h/s, sgminer-gm - 675 h/s.
Try on 270/370 and other analog cards with sgminer xintensity 460 worksize 8 gputhreads 2.
What clock/mem are you using to get 695 h/s on your 280x? The most I can get out of mine is about 615 Patched bios with Stilt's stripes. Core/Mem - 1175/1675.
|
|
|
|
disodium
Newbie
Offline
Activity: 16
Merit: 0
|
|
October 14, 2017, 01:59:57 PM |
|
Claymore, please add option to disable asm kernels. I have a mixed 470 4gb rig with two HIS cards, they tend to fail on asm kernels with AMD blockchain drivers on any of your miners. On Ethash miner, however, I can disable asm kernels for these cards, but as of now there's no such option on CryptoNight miner.
|
|
|
|
|