Claymore's CryptoNote AMD GPU Miner v11.3

[cryptathlos]

^^^ I'd like to recommend the rx580-8gb for use with this miner.

Agreed. I would prefer to keep the 4gb prices lower and for myself.   

[uDwcHYO]

miner show me only temperature for one card, how can i fix this? in config file nothing unusual, only pool data

GPU0 t=51C fan=42%
XMR: 12/06/17-06:24:26 - SHARE FOUND - (GPU 3)
Share accepted (156 ms)!
XMR: 12/06/17-06:24:32 - SHARE FOUND - (GPU 3)
Share accepted (125 ms)!
XMR: 12/06/17-06:24:40 - New job from xmr-eu1.nanopool.org:14444
XMR - Total Speed: 3334 H/s, Total Shares: 24, Rejected: 0, Time: 00:13
XMR: GPU0 834 H/s, GPU1 834 H/s, GPU2 834 H/s, GPU3 832 H/s
XMR:  Stale share found - skip
GPU0 t=50C fan=42%
GPU0 t=51C fan=42%

[Call_Me_Bambi]

Hi, could someone possible put there batch file for electroneum for ver 10.2 please? on mining pool   pool.electroneum.space    
thanks

This is the batch file I've been using, with Ver 10.2, on pool.electroneum.space , with any luck MiningPoolHub http://miningpoolhub.com will soon have ETN on there list of coins.

Code:

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner -xpool stratum+tcp://pool.electroneum.space:3333 -xwal etnkHJemadZhrZFie58xd5LL1huV848cn1h2ZSCZfefCdLgVBKwthwZ8hvALdoZHgkAahKwtsqedSRRtmeD3iops3Bw6JXw1xM -xpsw x -nofee 1 -allpools 1 -ftime 10

[NetWhiz]

Rig runs fine on the latest version of ether dual miner.  But when I run the latest version of cryptonote I get this:

08:46:29:818   abc   GPU 4, GpuMiner dk2a failed -4
08:46:29:827   bd0   Job changed, drop current round
08:46:29:836   ac0   Job changed, drop current round
08:46:29:855   9c0   GPU 3, GpuMiner dk2a failed -4
08:46:29:897   a30   Job changed, drop current round
08:46:29:904   a28   Job changed, drop current round
08:46:29:927   a28   GPU 3, GpuMiner dk2a failed -4
08:46:29:935   a44   GPU 3, GpuMiner dk2an0 failed -4
08:46:29:945   a30   GPU 3, GpuMiner dk2an0 failed -4
08:46:29:958   a9c   GPU 2, GpuMiner dk2a failed -4
08:46:30:149   ac0   GPU 4, GpuMiner dk2a failed -4

I tried setting -h 1024.  I also have virtual memory and environment variables set.

Set your VM to a minimum of 4GB for each GPU (prefer 8GB if you have 8GB cards). This miner is very memory heavy on VM though it uses less when running. I have 6 8GB cards in each rig and set the VM to start at 16 and max at 50. Works fine then.

[dollos]

Hi, could someone possible put there batch file for electroneum for ver 10.2 please? on mining pool   pool.electroneum.space    
thanks

This is the batch file I've been using, with Ver 10.2, on pool.electroneum.space , with any luck MiningPoolHub http://miningpoolhub.com will soon have ETN on there list of coins.

Code:

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner -xpool stratum+tcp://pool.electroneum.space:3333 -xwal etnkHJemadZhrZFie58xd5LL1huV848cn1h2ZSCZfefCdLgVBKwthwZ8hvALdoZHgkAahKwtsqedSRRtmeD3iops3Bw6JXw1xM -xpsw x -nofee 1 -allpools 1 -ftime 10

Thank you very much, really appreciate the help.!!!

[notbatman]

^^^ I'd like to recommend the rx580-8gb for use with this miner.

Agreed. I would prefer to keep the 4gb prices lower and for myself.   

Have at 'em the 4gb cards are all crap.

[spyshagg]

I'm testing this miner and its using more power than xmr-stack for only ~50h/s more.    Anyone else noticed the same?

[Marvell2]

I'm testing this miner and its using more power than xmr-stack for only ~50h/s more.    Anyone else noticed the same?

yeah seeing the same but im using cast xmr , what hash rates are you getting ?

for my underclocked 470s i see 700 h/s 1100 core and 1925 mem ,
for my underclocked 480 i see 800 h/s 1100 core and 2100 mem

on cast i see like 660 and 730 respectively , but less power use

[spyshagg]

I'm testing this miner and its using more power than xmr-stack for only ~50h/s more.    Anyone else noticed the same?

yeah seeing the same but im using cast xmr , what hash rates are you getting ?

for my underclocked 470s i see 700 h/s 1100 core and 1925 mem ,
for my underclocked 480 i see 800 h/s 1100 core and 2100 mem

on cast i see like 660 and 730 respectively , but less power use

what arguments to make Cast work on rx570's ?

I'm seeing 800h/s on average using claymore 1080gpu/1950mem @825mv  ~60w (gpu-z)

On the 290's I'm seeing 780h/s 1000/1100 89w (gpu-z) on average but with high spikes to 120w

[nowaltcoin]

Dear Mister (Sir) Claymore,

will there be a chance for a new version (10.3?) so that i can use my bulk of Hd7850/r9 270/hd7790.
It would be very nice!

At the moment the 'Pitcairn' cards throw a lot of errors (miscalculated) and for the bonaire there is no asm anymore in 10.2
So i stuck  at 9.7 with most of my cards ;( .

Have a nice day

[androstan1234]

Rig runs fine on the latest version of ether dual miner.  But when I run the latest version of cryptonote I get this:

08:46:29:818   abc   GPU 4, GpuMiner dk2a failed -4
08:46:29:827   bd0   Job changed, drop current round
08:46:29:836   ac0   Job changed, drop current round
08:46:29:855   9c0   GPU 3, GpuMiner dk2a failed -4
08:46:29:897   a30   Job changed, drop current round
08:46:29:904   a28   Job changed, drop current round
08:46:29:927   a28   GPU 3, GpuMiner dk2a failed -4
08:46:29:935   a44   GPU 3, GpuMiner dk2an0 failed -4
08:46:29:945   a30   GPU 3, GpuMiner dk2an0 failed -4
08:46:29:958   a9c   GPU 2, GpuMiner dk2a failed -4
08:46:30:149   ac0   GPU 4, GpuMiner dk2a failed -4

I tried setting -h 1024.  I also have virtual memory and environment variables set.

Set your VM to a minimum of 4GB for each GPU (prefer 8GB if you have 8GB cards). This miner is very memory heavy on VM though it uses less when running. I have 6 8GB cards in each rig and set the VM to start at 16 and max at 50. Works fine then.

Thank you kindly, this worked.  One gpu has low hash rate (~250 h/s vs ~750 h/s for the rest), and not always the same one, which is odd. 

[notbatman]

I just found all my miners offline due to segmentation fault (core dumped) even with a failover pool this is happening again...

This sucks, I almost think it's being triggered on purpose as it only happens right after I fall asleep or leave the miners unattended. I lost like 10?+ hours of hashing, fuck.



edit:

OK I figured it out every server and all of nicehash has gone down, my failover server was the nicehash eu server and it looks like it went down with the usa server,

I'll use miningpoolhub.com as my failover now as I know they use cloudflare.




edit_2:

my btcs? my precious btcs?

[baga105]

So far soo good on my rigs.. Will see for how long. I always had problems with this miner in the past

[notbatman]

So far soo good on my rigs.. Will see for how long. I always had problems with this miner in the past

I've been mining on nicehash, I think this problem is just with them or perhaps ssl related? This is a miner breaking issue....

[notbatman]

Wow, today is not my day. I jumped off nicehash and now they're DDoSing the new pool I connected to... crap on a stick!






0 H/s  QQ

OMG they're tottaly fucking the pools front end too!!



edit:

etn.sup.rnova.cc have cloudflare!!!!



edit_2:

Their hashrate dashboard meter is in MH/s LOL.

[arjet]

anyone can help my make start. bat file for monero mining in nanopool? i use poloniex wallet with XMR address. thanks..

[spyshagg]

anyone can help my make start. bat file for monero mining in nanopool? i use poloniex wallet with XMR address. thanks..

Open poloniex, click your xmr deposit wallet, copy the wallet address.

In the file epools.txt add at the bottom:

POOL: stratum+tcp://xmr-eu1.nanopool.org:14444, WALLET: ffdsfsdfsfsfdfdfsddddddddddddffffffffffffffffffffffffffffffffffffffffffffffffff ffffffff.mycomputer, PSW: x, ALLPOOLS: 0
POOL: stratum+tcp://xmr-eu2.nanopool.org:14444, WALLET: ffdsfsdfsfsfdfdfsddddddddddddffffffffffffffffffffffffffffffffffffffffffffffffff ffffffff.mycomputer, PSW: x, ALLPOOLS: 0

In the file Config.txt, delete everything in there. Must be empty for now.

On your start.bat, add this:

GPU_FORCE_64BIT_PTR 1
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
NsGpuCNMiner.exe

Now run the start.bat

thats it.


Everytime you need to add extra pools, add them to the epools.txt
Everytime you need to add arguments (set temperatures, voltages etc) add them to the config.txt

[notbatman]

^^^ use multiple failover pools if you're on linux!

[arjet]

anyone can help my make start. bat file for monero mining in nanopool? i use poloniex wallet with XMR address. thanks..

Open poloniex, click your xmr deposit wallet, copy the wallet address.

In the file epools.txt add at the bottom:

POOL: stratum+tcp://xmr-eu1.nanopool.org:14444, WALLET: ffdsfsdfsfsfdfdfsddddddddddddffffffffffffffffffffffffffffffffffffffffffffffffff ffffffff.mycomputer, PSW: x, ALLPOOLS: 0
POOL: stratum+tcp://xmr-eu2.nanopool.org:14444, WALLET: ffdsfsdfsfsfdfdfsddddddddddddffffffffffffffffffffffffffffffffffffffffffffffffff ffffffff.mycomputer, PSW: x, ALLPOOLS: 0

In the file Config.txt, delete everything in there. Must be empty for now.

On your start.bat, add this:

GPU_FORCE_64BIT_PTR 1
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
NsGpuCNMiner.exe

Now run the start.bat

thats it.


Everytime you need to add extra pools, add them to the epools.txt
Everytime you need to add arguments (set temperatures, voltages etc) add them to the config.txt

Thanks alot. running now

[Bitoken]

Hi, just a message to say that -dgb -1 is not working