Bael
Jr. Member
Offline
Activity: 87
Merit: 2
|
|
December 08, 2017, 11:36:49 PM |
|
Hi
I want to mine ETN but with what I'm reading from the reboots I do not know if I risk it.
My rig is 8 rx 580, is version 9.7 good as the partner says?
Or would it be better to use version 10.2 with -nofee 1?
regards!!
|
|
|
|
chinpow
Newbie
Offline
Activity: 4
Merit: 0
|
|
December 09, 2017, 12:03:31 AM |
|
Hi i have a probleme with CMCN v10.2
Opencl error -61 cannot create gpu buffer And after that i try this command line
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_MAX_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_MAX_SINGLE_ALLOC_PERCENT 100
I have an message error
Unknown command setx Unknown command Gpu ....etc
Please help me i wante to mine electroneum but with claymore v10.2 its impossible
|
|
|
|
Call_Me_Bambi
|
|
December 09, 2017, 03:01:26 AM |
|
Hi i have a probleme with CMCN v10.2
Opencl error -61 cannot create gpu buffer And after that i try this command line
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_MAX_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_MAX_SINGLE_ALLOC_PERCENT 100
I have an message error
Unknown command setx Unknown command Gpu ....etc
Please help me i wante to mine electroneum but with claymore v10.2 its impossible
Post what you have in your *.bat file and config.txt file this will help us with your problem. I do not use the config.txt file, but it has it's uses, I just put everything in the *.bat file like this.. setx GPU_FORCE_64BIT_PTR 1 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_SINGLE_ALLOC_PERCENT 100 setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner -xpool stratum+tcp://pool.electroneum.space:3333 -xwal etnkHJemadZhrZFie58xd5LL1huV848cn1h2ZSCZfefCdLgVBKwthwZ8hvALdoZHgkAahKwtsqedSRRtmeD3iops3Bw6JXw1xM -xpsw x -nofee 1 -allpools 1
|
|
|
|
blackhwk77
Newbie
Offline
Activity: 27
Merit: 0
|
|
December 09, 2017, 06:54:37 AM |
|
How stable is this with 6+ video cards? I cant seem to get all 10 of mine running.
|
|
|
|
new24core
Member
Offline
Activity: 413
Merit: 17
|
|
December 09, 2017, 09:38:00 AM |
|
I have been mining ETH with the following settings on some 580's :-
-tstop 80,80 -tt 73,65 -fanmin 43,40 -fanmax 100,100 -cclock 1200,1200 -mclock 2000,2000 -cvddc 900,900 -mvddc 940,940 -powlim -20,-20
What are the best settings for Electroneum ?
|
|
|
|
d57heinz
Legendary
Offline
Activity: 1453
Merit: 1011
Bitcoin Talks Bullshit Walks
|
|
December 09, 2017, 10:40:10 AM |
|
Thanks, it worked. But now I get errors for all 6 GPU's reporting GpuMiner dk2an0 failed -4.
Any suggestions?
Set virtual mem equal to amount of ram all cards have added together. So 6 4gb you need 24gb pagefile. 8gb you need 48gb pagefile. Also try to add -h 1024 to your startup command. Add -dmem 0 if above doesn’t work BR
|
As in nature, all is ebb and tide, all is wave motion, so it seems that in all branches of industry, alternating currents - electric wave motion - will have the sway. ~Nikola Tesla~
|
|
|
iase
Newbie
Offline
Activity: 28
Merit: 0
|
|
December 09, 2017, 11:01:23 AM |
|
Thanks, it worked. But now I get errors for all 6 GPU's reporting GpuMiner dk2an0 failed -4.
Any suggestions?
Set virtual mem equal to amount of ram all cards have added together. So 6 4gb you need 24gb pagefile. 8gb you need 48gb pagefile. Also try to add -h 1024 to your startup command. Add -dmem 0 if above doesn’t work BR hello i have a one question last night my Rig amd rx 570 making 170 electroneum and they was sending on my wallet, i checking and is a out my wallet if you can tell me how i can check where is it my money and how much time i need for a waiting thanks for helping and sorry for a my bad english
|
|
|
|
asbits
Newbie
Offline
Activity: 1
Merit: 0
|
|
December 09, 2017, 11:54:24 AM Last edit: December 10, 2017, 09:59:49 AM by asbits |
|
Why my Sapphire RX470 8G gives just 340 Mh???
e setting solved it for me.
|
|
|
|
Call_Me_Bambi
|
|
December 09, 2017, 02:29:49 PM |
|
hello
i have a one question
last night my Rig amd rx 570 making 170 electroneum and they was sending on my wallet, i checking and is a out my wallet if you can tell me how i can check where is it my money and how much time i need for a waiting thanks for helping and sorry for a my bad english
You might be better off asking this question in the Electroneum thread, I'm sure you would get an answer here but there is a chance you will get a quicker reply in this thread.. https://bitcointalk.org/index.php?topic=2353282.1920Some details to add to your post which will help; which pool are you on, what wallet are you using, are you minging directly to an exchange or to the command line wallet .
|
|
|
|
velillen
Newbie
Offline
Activity: 6
Merit: 0
|
|
December 09, 2017, 02:42:08 PM |
|
Well Im slowing diving into mining. Starting with this miner.
My main question is just what sort of Hashrate should i be getting with a stock Sapphire R9 290? Currently I am only getting an average of 115H/s with it. before I go playing with settings and things just trying to get some sort of baseline on what to expect. The temp on the card reads a constant 40C at all times
Im also running the CPU miner and a I5-4660K (not overclocked) is getting an average of 220H/s
|
|
|
|
jojoledemago
Newbie
Offline
Activity: 10
Merit: 0
|
|
December 09, 2017, 03:12:25 PM |
|
I see I'm not alone with this error each time devfee tries to connect to cryptonight.usa.nicehash.com, here are my log files if anyone can help... Everything seems to be OK at the beginning, then the devfee comes : 15:29:18:608 8bfff700 DevFee: XMR: Stratum - connecting to 'cryptonight.usa.nicehash.com' <169.45.93.83>
port 3355
...
15:29:18:697 b9466740 GPU0 t=58C fan=60%, GPU1 t=59C fan=60%, GPU2 t=63C fan=35%, GPU3 t=62C fan=27%, GP$ 15:29:18:697 b9466740 em hbt: 0, fm hbt: 332, 15:29:18:697 b9466740 watchdog - thread 0, hb time 8613 15:29:18:697 b9466740 watchdog - thread 1, hb time 4161 15:29:18:697 b9466740 watchdog - thread 2, hb time 6386 15:29:18:697 b9466740 watchdog - thread 3, hb time 1935
...
15:29:48:705 b9466740 GPU0 t=58C fan=60%, GPU1 t=57C fan=53%, GPU2 t=60C fan=40%, GPU3 t=62C fan=27%, GP$ 15:29:48:705 b9466740 em hbt: 1, fm hbt: 30340, 15:29:48:705 b9466740 watchdog - thread 0, hb time 2996 15:29:48:705 b9466740 watchdog - thread 1, hb time 7452 15:29:48:705 b9466740 watchdog - thread 2, hb time 771 15:29:48:705 b9466740 watchdog - thread 3, hb time 5226
...
15:29:59:891 ac0a4700 got 242 bytes 15:29:59:891 ac0a4700 buf: {"jsonrpc":"2.0","method":"job","params":{"blob":"0101e7e6afd10595cb75c09d497$
15:29:59:891 ac0a4700 parse packet: 241 15:29:59:891 ac0a4700 new buf size: 0 15:29:59:891 ac0a4700 XMR: 12/09/17-15:29:59 - New job from etn-eu1.nanopool.org:13433 15:29:59:891 ac0a4700 target: 0x00008bcf (diff: 1380615203H) 15:29:59:891 ac0a4700 XMR - Total Speed: 808 H/s, Total Shares: 4, Rejected: 0, Time: 00:14 15:29:59:891 ac0a4700 XMR: GPU0 808 H/s
...
15:30:01:290 ae0a8700 Job changed, drop current round 15:30:01:290 ad0a6700 Job changed, drop current round 15:30:01:290 ad8a7700 Job changed, drop current round
...
15:30:18:713 b9466740 GPU0 t=58C fan=60%, GPU1 t=61C fan=22%, GPU2 t=58C fan=40%, GPU3 t=62C fan=27%, GP$ 15:30:18:713 b9466740 em hbt: 1, fm hbt: 60348, 15:30:18:713 b9466740 watchdog - thread 0, hb time 3898 15:30:18:713 b9466740 watchdog - thread 1, hb time 8354 15:30:18:713 b9466740 watchdog - thread 2, hb time 1672 15:30:18:713 b9466740 watchdog - thread 3, hb time 6123
...
15:30:48:722 b9466740 GPU0 t=58C fan=60%, GPU1 t=64C fan=64%, GPU2 t=58C fan=40%, GPU3 t=62C fan=27%, GP$ 15:30:48:722 b9466740 em hbt: 1, fm hbt: 90357, 15:30:48:722 b9466740 watchdog - thread 0, hb time 7199 15:30:48:722 b9466740 watchdog - thread 1, hb time 2747 15:30:48:722 b9466740 watchdog - thread 2, hb time 4973 15:30:48:722 b9466740 watchdog - thread 3, hb time 519
...
15:30:59:901 ac0a4700 got 242 bytes 15:30:59:901 ac0a4700 buf: {"jsonrpc":"2.0","method":"job","params":{"blob":"0101a3e7afd10595cb75c09d497$
15:30:59:901 ac0a4700 parse packet: 241 15:30:59:901 ac0a4700 new buf size: 0 15:30:59:902 ac0a4700 XMR: 12/09/17-15:30:59 - New job from etn-eu1.nanopool.org:13433 15:30:59:902 ac0a4700 target: 0x00008bcf (diff: 1380615203H) 15:30:59:902 ac0a4700 XMR - Total Speed: 808 H/s, Total Shares: 4, Rejected: 0, Time: 00:15 15:30:59:902 ac0a4700 XMR: GPU0 808 H/s 15:30:59:943 ad0a6700 Job changed, drop current round 15:30:59:943 ad8a7700 Job changed, drop current round 15:30:59:943 ac8a5700 Job changed, drop current round 15:30:59:943 ae0a8700 Job changed, drop current round
...
15:31:18:730 b9466740 GPU0 t=58C fan=60%, GPU1 t=59C fan=60%, GPU2 t=58C fan=40%, GPU3 t=62C fan=27%, GP$ 15:31:18:730 b9466740 watchdog - fminer thread hangs 15:31:18:730 b9466740 em hbt: 0, fm hbt: 120365, 15:31:18:730 b9466740 Miner thread hangs, need to restart miner! 15:31:18:730 b9466740 GPU 0 temp = 58, old fan speed = 60, new fan speed = 60
So the miner tries to restart and here are the lines that are not in the same state than previous starting : GPU #0: Ellesmere, 748 MB available, 36 compute units card 0, m1 748, m2 512 w 288 0 m = 0 Bad performance mode, you need to set GPU_MAX_ALLOC_PERCENT 100 GPU #0 algorithm ASM, -h 900, -dmem 1 (Memory used: 3780MB) OpenCL error 0 #101 - -61, cannot create GPU memory buffer OpenCL error 0 #101a - -61, cannot create GPU memory buffer
Here is what I can read for the first start : GPU #0: Ellesmere, 8055 MB available, 36 compute units card 0, m1 8055, m2 4048 w 288 0 m = 2 GPU #0 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
I tried with overclocked bios, with stock ones, tried to remove -dmem 1, tried with other pools... Still the same error... Last week with exactly the same args, I had no problem... I thonk it's due to devfee mining pool but I'm not sure, I have to use -nofee 1 for the moment but I'd prefer find a solution... Oups I forgot, I mine electroneum ETN with that card
|
|
|
|
BSAlex
Member
Offline
Activity: 239
Merit: 10
|
|
December 09, 2017, 03:51:02 PM |
|
Well Im slowing diving into mining. Starting with this miner.
My main question is just what sort of Hashrate should i be getting with a stock Sapphire R9 290? Currently I am only getting an average of 115H/s with it. before I go playing with settings and things just trying to get some sort of baseline on what to expect. The temp on the card reads a constant 40C at all times
Im also running the CPU miner and a I5-4660K (not overclocked) is getting an average of 220H/s
Some benchmarks from different users help to understand what performance you should have. http://monerobenchmarks.info/searchGPU.php
|
|
|
|
clems
Member
Offline
Activity: 171
Merit: 10
|
|
December 09, 2017, 05:54:34 PM |
|
Anyone in contact whith the dev in the forum?
Since Nicehash is down Claymore dev fee is not able to contact the nicehash pool so claymore is craching....
Can be very cool if the dev can remove Nicehash pool.
|
|
|
|
HeavyDeisel
|
|
December 09, 2017, 06:03:36 PM |
|
I picked up some AMD Radeon RX 580's on the cheap,, can someone show me a sample bat file to use to mine monero at a good monero Pool, i watched a bunch of videos, but my bat. keeps crashing on the start...lol, thnks
|
|
|
|
evlo
Jr. Member
Offline
Activity: 155
Merit: 4
|
|
December 09, 2017, 07:11:32 PM |
|
rx570 8g - i made bios that takes care of overclocking and undervolting, because i was diasappointed with how amd overclocking works on linux (it almost does not ) eth only windows 29.6Mh/s @ 105w linux 29.2Mh/s @ 125w power is card only not whole system, not gpu only. Any idea why linux has worse performance and more power conspution? I run claymore with exact same parameters.
|
|
|
|
Trimegistus
Legendary
Offline
Activity: 1564
Merit: 1027
|
|
December 09, 2017, 08:17:45 PM |
|
How stable is this with 6+ video cards? I cant seem to get all 10 of mine running.
It works fine with 6
|
|
|
|
Xaos-biker
Newbie
Offline
Activity: 6
Merit: 0
|
|
December 09, 2017, 09:24:02 PM |
|
I see I'm not alone with this error each time devfee tries to connect to cryptonight.usa.nicehash.com, here are my log files if anyone can help... Everything seems to be OK at the beginning, then the devfee comes : 15:29:18:608 8bfff700 DevFee: XMR: Stratum - connecting to 'cryptonight.usa.nicehash.com' <169.45.93.83>
port 3355
...
15:29:18:697 b9466740 GPU0 t=58C fan=60%, GPU1 t=59C fan=60%, GPU2 t=63C fan=35%, GPU3 t=62C fan=27%, GP$ 15:29:18:697 b9466740 em hbt: 0, fm hbt: 332, 15:29:18:697 b9466740 watchdog - thread 0, hb time 8613 15:29:18:697 b9466740 watchdog - thread 1, hb time 4161 15:29:18:697 b9466740 watchdog - thread 2, hb time 6386 15:29:18:697 b9466740 watchdog - thread 3, hb time 1935
...
15:29:48:705 b9466740 GPU0 t=58C fan=60%, GPU1 t=57C fan=53%, GPU2 t=60C fan=40%, GPU3 t=62C fan=27%, GP$ 15:29:48:705 b9466740 em hbt: 1, fm hbt: 30340, 15:29:48:705 b9466740 watchdog - thread 0, hb time 2996 15:29:48:705 b9466740 watchdog - thread 1, hb time 7452 15:29:48:705 b9466740 watchdog - thread 2, hb time 771 15:29:48:705 b9466740 watchdog - thread 3, hb time 5226
...
15:29:59:891 ac0a4700 got 242 bytes 15:29:59:891 ac0a4700 buf: {"jsonrpc":"2.0","method":"job","params":{"blob":"0101e7e6afd10595cb75c09d497$
15:29:59:891 ac0a4700 parse packet: 241 15:29:59:891 ac0a4700 new buf size: 0 15:29:59:891 ac0a4700 XMR: 12/09/17-15:29:59 - New job from etn-eu1.nanopool.org:13433 15:29:59:891 ac0a4700 target: 0x00008bcf (diff: 1380615203H) 15:29:59:891 ac0a4700 XMR - Total Speed: 808 H/s, Total Shares: 4, Rejected: 0, Time: 00:14 15:29:59:891 ac0a4700 XMR: GPU0 808 H/s
...
15:30:01:290 ae0a8700 Job changed, drop current round 15:30:01:290 ad0a6700 Job changed, drop current round 15:30:01:290 ad8a7700 Job changed, drop current round
...
15:30:18:713 b9466740 GPU0 t=58C fan=60%, GPU1 t=61C fan=22%, GPU2 t=58C fan=40%, GPU3 t=62C fan=27%, GP$ 15:30:18:713 b9466740 em hbt: 1, fm hbt: 60348, 15:30:18:713 b9466740 watchdog - thread 0, hb time 3898 15:30:18:713 b9466740 watchdog - thread 1, hb time 8354 15:30:18:713 b9466740 watchdog - thread 2, hb time 1672 15:30:18:713 b9466740 watchdog - thread 3, hb time 6123
...
15:30:48:722 b9466740 GPU0 t=58C fan=60%, GPU1 t=64C fan=64%, GPU2 t=58C fan=40%, GPU3 t=62C fan=27%, GP$ 15:30:48:722 b9466740 em hbt: 1, fm hbt: 90357, 15:30:48:722 b9466740 watchdog - thread 0, hb time 7199 15:30:48:722 b9466740 watchdog - thread 1, hb time 2747 15:30:48:722 b9466740 watchdog - thread 2, hb time 4973 15:30:48:722 b9466740 watchdog - thread 3, hb time 519
...
15:30:59:901 ac0a4700 got 242 bytes 15:30:59:901 ac0a4700 buf: {"jsonrpc":"2.0","method":"job","params":{"blob":"0101a3e7afd10595cb75c09d497$
15:30:59:901 ac0a4700 parse packet: 241 15:30:59:901 ac0a4700 new buf size: 0 15:30:59:902 ac0a4700 XMR: 12/09/17-15:30:59 - New job from etn-eu1.nanopool.org:13433 15:30:59:902 ac0a4700 target: 0x00008bcf (diff: 1380615203H) 15:30:59:902 ac0a4700 XMR - Total Speed: 808 H/s, Total Shares: 4, Rejected: 0, Time: 00:15 15:30:59:902 ac0a4700 XMR: GPU0 808 H/s 15:30:59:943 ad0a6700 Job changed, drop current round 15:30:59:943 ad8a7700 Job changed, drop current round 15:30:59:943 ac8a5700 Job changed, drop current round 15:30:59:943 ae0a8700 Job changed, drop current round
...
15:31:18:730 b9466740 GPU0 t=58C fan=60%, GPU1 t=59C fan=60%, GPU2 t=58C fan=40%, GPU3 t=62C fan=27%, GP$ 15:31:18:730 b9466740 watchdog - fminer thread hangs 15:31:18:730 b9466740 em hbt: 0, fm hbt: 120365, 15:31:18:730 b9466740 Miner thread hangs, need to restart miner! 15:31:18:730 b9466740 GPU 0 temp = 58, old fan speed = 60, new fan speed = 60
So the miner tries to restart and here are the lines that are not in the same state than previous starting : GPU #0: Ellesmere, 748 MB available, 36 compute units card 0, m1 748, m2 512 w 288 0 m = 0 Bad performance mode, you need to set GPU_MAX_ALLOC_PERCENT 100 GPU #0 algorithm ASM, -h 900, -dmem 1 (Memory used: 3780MB) OpenCL error 0 #101 - -61, cannot create GPU memory buffer OpenCL error 0 #101a - -61, cannot create GPU memory buffer
Here is what I can read for the first start : GPU #0: Ellesmere, 8055 MB available, 36 compute units card 0, m1 8055, m2 4048 w 288 0 m = 2 GPU #0 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
I tried with overclocked bios, with stock ones, tried to remove -dmem 1, tried with other pools... Still the same error... Last week with exactly the same args, I had no problem... I thonk it's due to devfee mining pool but I'm not sure, I have to use -nofee 1 for the moment but I'd prefer find a solution... Oups I forgot, I mine electroneum ETN with that card Same problem with HIVE os, its problem with hacked nicehash only Claymore support can fix it.
|
|
|
|
Asgaroth
Newbie
Offline
Activity: 49
Merit: 0
|
|
December 09, 2017, 09:50:44 PM Last edit: December 09, 2017, 10:10:08 PM by Asgaroth |
|
Hi, I seem to be getting the following error popping up about 4 to 5 times whenever claymore starts: GPU#0 got incorrect share. If you see this warning often, make sure you did not overclock it too much...
Then I dont see the messages for a while, but, when the dev fee kicks in it switches pools, finishes and tries to pull from my configured pool, then I see the errors 4 or 5 tims again, then nothing for some time, rinse and repeat. I noticed when claymore starts up it setting the -h parameter to 1800, looking at my hash rate per card it seems to hover around 745 - 748 H/s. Do I need to drop this -h parameter down a bit? What is the recommended setting for the -h paremeter? I have 2 x AMD PowerColor Red Devil RX 580 Golden Sample with BBT modded BIOS applied, I obtained the BIOS from here. Any thoughts/tips/suggestions much appreciated.
|
|
|
|
JoeBobJr
Newbie
Offline
Activity: 18
Merit: 0
|
|
December 09, 2017, 10:00:09 PM Last edit: December 10, 2017, 04:05:19 AM by JoeBobJr |
|
Having some issues with this miner. I was using awesome miner which uses the 10.x version and I was getting a ton of share errors. I adjusted the -h many different ways and nothing was working so I started researching. I ran across a couple threads on other sites saying to use t he 9.7 version because it doesn't do very well on the r9 270x models. So I downloaded it and noticed it required 15.12 drivers so I downloaded those removed all the old driver files and installed the new one. I started using the miner and used it a couple days then stopped because I was mining other things. I tried to go back to using this miner again today and now every time I open it crashes. Maybe someone here can point me in a direction how to get this miner working again. Any help would be greatly appreciated. GPU-Z Info http://i.epvpimg.com/Pkn2dab.pnghttp://i.epvpimg.com/AiJvcab.pngAnd here is the windows log error http://i.epvpimg.com/uSPPdab.pngI'm not sure why the images or not showing I've used the img tags the forums provides if a moderator sees this please fix the images so they will load int he post. TY! EDIT: I've wanted to mention also that I've tried sfc/scannow to check windows files making sure they are okay. I've also turned off my Microsoft Security Essentials making sure it wasn't causing the exception. Still no luck. The crazy thing is just a couple days ago this miner was running smooth as hell with no issues at all for several days. As far as I know I haven't changed anything on this desktop in several weeks. Same overclock and all that. SOLVED: For some reason when you try to mine ETN with claymore 9.7 you can not use the config.txt or the epools.txt. You have to put all the flags in the same line inside the batch file. IF you do not it will crash the miner every single time! Makes absolutely no sense to me but I got it working now after 8 hours messing with this crap!!!
|
|
|
|
JoeBobJr
Newbie
Offline
Activity: 18
Merit: 0
|
|
December 09, 2017, 10:24:03 PM |
|
Hi, I seem to be getting the following error popping up about 4 to 5 times whenever claymore starts: GPU#0 got incorrect share. If you see this warning often, make sure you did not overclock it too much...
Then I dont see the messages for a while, but, when the dev fee kicks in it switches pools, finishes and tries to pull from my configured pool, then I see the errors 4 or 5 tims again, then nothing for some time, rinse and repeat. I noticed when claymore starts up it setting the -h parameter to 1800, looking at my hash rate per card it seems to hover around 745 - 748 H/s. Do I need to drop this -h parameter down a bit? What is the recommended setting for the -h paremeter? I have 2 x AMD PowerColor Red Devil RX 580 Golden Sample with BBT modded BIOS applied, I obtained the BIOS from here. Any thoughts/tips/suggestions much appreciated. Use the 9.7 version of the miner. You may have to go back to an older version of the drivers it requires 15.12 drivers or at least it recommends them.
|
|
|
|
|