Claymore's CryptoNote AMD GPU Miner v11.3

[Bael]

Hi

I want to mine ETN but with what I'm reading from the reboots I do not know if I risk it.

My rig is 8 rx 580, is version 9.7 good as the partner says?

Or would it be better to use version 10.2 with -nofee 1?

regards!!

[chinpow]

Hi i have a probleme with CMCN v10.2

Opencl error -61 cannot create gpu buffer
And after that i try this command line

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_MAX_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_MAX_SINGLE_ALLOC_PERCENT 100

I have an message error

Unknown command setx
Unknown command Gpu ....etc

Please help me i wante to mine electroneum but with claymore v10.2 its impossible

[Call_Me_Bambi]

Hi i have a probleme with CMCN v10.2

Opencl error -61 cannot create gpu buffer
And after that i try this command line

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_MAX_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_MAX_SINGLE_ALLOC_PERCENT 100

I have an message error

Unknown command setx
Unknown command Gpu ....etc

Please help me i wante to mine electroneum but with claymore v10.2 its impossible

Post what you have in your *.bat file and config.txt file this will help us with your problem. I do not use the config.txt file, but it has it's uses, I just put everything in the *.bat file like this..

Code:

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner -xpool stratum+tcp://pool.electroneum.space:3333 -xwal etnkHJemadZhrZFie58xd5LL1huV848cn1h2ZSCZfefCdLgVBKwthwZ8hvALdoZHgkAahKwtsqedSRRtmeD3iops3Bw6JXw1xM -xpsw x -nofee 1 -allpools 1 

[blackhwk77]

How stable is this with 6+ video cards?  I cant seem to get all 10 of mine running.

[new24core]

I have been mining ETH with the following settings on some 580's :-

-tstop 80,80
-tt 73,65
-fanmin 43,40
-fanmax 100,100
-cclock 1200,1200
-mclock 2000,2000
-cvddc 900,900
-mvddc 940,940
-powlim -20,-20


What are the best settings for Electroneum ?

[d57heinz]

Thanks, it worked. But now I get errors for all 6 GPU's reporting GpuMiner dk2an0 failed -4.

Any suggestions?

Set virtual mem equal to amount of ram all cards have added together. So 6 4gb you need 24gb pagefile. 8gb you need 48gb pagefile.  Also try to add -h 1024 to your startup command. Add -dmem 0 if above doesn’t work

BR

[iase]

Thanks, it worked. But now I get errors for all 6 GPU's reporting GpuMiner dk2an0 failed -4.

Any suggestions?

Set virtual mem equal to amount of ram all cards have added together. So 6 4gb you need 24gb pagefile. 8gb you need 48gb pagefile.  Also try to add -h 1024 to your startup command. Add -dmem 0 if above doesn’t work

BR

hello

i have a one question

last night my Rig amd rx 570 making 170 electroneum and they was sending on my wallet, i checking and is a out my wallet if you can tell me how i can check where is it my money and how much time i need for a waiting
thanks for helping and sorry for a my bad english

[asbits]

Why my Sapphire RX470 8G gives just 340 Mh???

e
setting

Code:

-h 1024

solved it for me.

[Call_Me_Bambi]

hello

i have a one question

last night my Rig amd rx 570 making 170 electroneum and they was sending on my wallet, i checking and is a out my wallet if you can tell me how i can check where is it my money and how much time i need for a waiting
thanks for helping and sorry for a my bad english

You might be better off asking this question in the Electroneum thread, I'm sure you would get an answer here but there is a chance you will get a quicker reply in this thread.. https://bitcointalk.org/index.php?topic=2353282.1920

Some details to add to your post which will help; which pool are you on, what wallet are you using, are you minging directly to an exchange or to the command line wallet .

[velillen]

Well Im slowing diving into mining. Starting with this miner.

My main question is just what sort of Hashrate should i be getting with a stock Sapphire R9 290? Currently I am only getting an average of 115H/s with it.  before I go playing with settings and things just trying to get some sort of baseline on what to expect. The temp on the card reads a constant 40C at all times

Im also running the CPU miner and a I5-4660K (not overclocked) is getting an average of 220H/s

[jojoledemago]

I see I'm not alone with this error each time devfee tries to connect to cryptonight.usa.nicehash.com, here are my log files if anyone can help...

Everything seems to be OK at the beginning, then the devfee comes :

Code:

15:29:18:608    8bfff700        DevFee: XMR: Stratum - connecting to 'cryptonight.usa.nicehash.com' <169.45.93.83> 

port 3355

...

15:29:18:697    b9466740        GPU0 t=58C fan=60%, GPU1 t=59C fan=60%, GPU2 t=63C fan=35%, GPU3 t=62C fan=27%, GP$
15:29:18:697    b9466740        em hbt: 0, fm hbt: 332,
15:29:18:697    b9466740        watchdog - thread 0, hb time 8613
15:29:18:697    b9466740        watchdog - thread 1, hb time 4161
15:29:18:697    b9466740        watchdog - thread 2, hb time 6386
15:29:18:697    b9466740        watchdog - thread 3, hb time 1935

...

15:29:48:705    b9466740        GPU0 t=58C fan=60%, GPU1 t=57C fan=53%, GPU2 t=60C fan=40%, GPU3 t=62C fan=27%, GP$
15:29:48:705    b9466740        em hbt: 1, fm hbt: 30340,
15:29:48:705    b9466740        watchdog - thread 0, hb time 2996
15:29:48:705    b9466740        watchdog - thread 1, hb time 7452
15:29:48:705    b9466740        watchdog - thread 2, hb time 771
15:29:48:705    b9466740        watchdog - thread 3, hb time 5226

...

15:29:59:891    ac0a4700        got 242 bytes
15:29:59:891    ac0a4700        buf: {"jsonrpc":"2.0","method":"job","params":{"blob":"0101e7e6afd10595cb75c09d497$

15:29:59:891    ac0a4700        parse packet: 241
15:29:59:891    ac0a4700        new buf size: 0
15:29:59:891    ac0a4700        XMR: 12/09/17-15:29:59 - New job from etn-eu1.nanopool.org:13433
15:29:59:891    ac0a4700        target: 0x00008bcf (diff: 1380615203H)
15:29:59:891    ac0a4700        XMR - Total Speed: 808 H/s, Total Shares: 4, Rejected: 0, Time: 00:14
15:29:59:891    ac0a4700        XMR: GPU0 808 H/s


...

15:30:01:290    ae0a8700        Job changed, drop current round
15:30:01:290    ad0a6700        Job changed, drop current round
15:30:01:290    ad8a7700        Job changed, drop current round

...

15:30:18:713    b9466740        GPU0 t=58C fan=60%, GPU1 t=61C fan=22%, GPU2 t=58C fan=40%, GPU3 t=62C fan=27%, GP$
15:30:18:713    b9466740        em hbt: 1, fm hbt: 60348,
15:30:18:713    b9466740        watchdog - thread 0, hb time 3898
15:30:18:713    b9466740        watchdog - thread 1, hb time 8354
15:30:18:713    b9466740        watchdog - thread 2, hb time 1672
15:30:18:713    b9466740        watchdog - thread 3, hb time 6123


...

15:30:48:722    b9466740        GPU0 t=58C fan=60%, GPU1 t=64C fan=64%, GPU2 t=58C fan=40%, GPU3 t=62C fan=27%, GP$
15:30:48:722    b9466740        em hbt: 1, fm hbt: 90357,
15:30:48:722    b9466740        watchdog - thread 0, hb time 7199
15:30:48:722    b9466740        watchdog - thread 1, hb time 2747
15:30:48:722    b9466740        watchdog - thread 2, hb time 4973
15:30:48:722    b9466740        watchdog - thread 3, hb time 519


...

15:30:59:901    ac0a4700        got 242 bytes
15:30:59:901    ac0a4700        buf: {"jsonrpc":"2.0","method":"job","params":{"blob":"0101a3e7afd10595cb75c09d497$

15:30:59:901    ac0a4700        parse packet: 241
15:30:59:901    ac0a4700        new buf size: 0
15:30:59:902    ac0a4700        XMR: 12/09/17-15:30:59 - New job from etn-eu1.nanopool.org:13433
15:30:59:902    ac0a4700        target: 0x00008bcf (diff: 1380615203H)
15:30:59:902    ac0a4700        XMR - Total Speed: 808 H/s, Total Shares: 4, Rejected: 0, Time: 00:15
15:30:59:902    ac0a4700        XMR: GPU0 808 H/s
15:30:59:943    ad0a6700        Job changed, drop current round
15:30:59:943    ad8a7700        Job changed, drop current round
15:30:59:943    ac8a5700        Job changed, drop current round
15:30:59:943    ae0a8700        Job changed, drop current round

...

15:31:18:730    b9466740        GPU0 t=58C fan=60%, GPU1 t=59C fan=60%, GPU2 t=58C fan=40%, GPU3 t=62C fan=27%, GP$
15:31:18:730    b9466740        watchdog - fminer thread hangs
15:31:18:730    b9466740        em hbt: 0, fm hbt: 120365,
15:31:18:730    b9466740        Miner thread hangs, need to restart miner!
15:31:18:730    b9466740        GPU 0 temp = 58, old fan speed = 60, new fan speed = 60

So the miner tries to restart and here are the lines that are not in the same state than previous starting :

Code:

 GPU #0: Ellesmere, 748 MB available, 36 compute units
 card 0, m1 748, m2 512 w 288
 0 m = 0
 Bad performance mode, you need to set GPU_MAX_ALLOC_PERCENT 100
 GPU #0 algorithm ASM, -h 900, -dmem 1 (Memory used: 3780MB)
OpenCL error 0 #101 - -61, cannot create GPU memory buffer
OpenCL error 0 #101a - -61, cannot create GPU memory buffer

Here is what I can read for the first start :

Code:

 GPU #0: Ellesmere, 8055 MB available, 36 compute units
 card 0, m1 8055, m2 4048 w 288
 0 m = 2
 GPU #0 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)

I tried with overclocked bios, with stock ones, tried to remove -dmem 1, tried with other pools... Still the same error... Last week with exactly the same args, I had no problem... I thonk it's due to devfee mining pool but I'm not sure, I have to use -nofee 1 for the moment but I'd prefer find a solution...

Oups I forgot, I mine electroneum ETN with that card

[BSAlex]

Well Im slowing diving into mining. Starting with this miner.

My main question is just what sort of Hashrate should i be getting with a stock Sapphire R9 290? Currently I am only getting an average of 115H/s with it.  before I go playing with settings and things just trying to get some sort of baseline on what to expect. The temp on the card reads a constant 40C at all times

Im also running the CPU miner and a I5-4660K (not overclocked) is getting an average of 220H/s

Some benchmarks from different users help to understand what performance you should have.

http://monerobenchmarks.info/searchGPU.php

[clems]

Anyone in contact whith the dev in the forum?

Since Nicehash is down Claymore dev fee is not able to contact the nicehash pool so claymore is craching....

Can be very cool if the dev can remove Nicehash pool.

[HeavyDeisel]

I picked up some AMD Radeon RX 580's on the cheap,, can someone show me a sample bat file to use to mine monero at a good monero Pool, i watched a bunch of videos, but my bat. keeps crashing on the start...lol, thnks

[evlo]

rx570 8g - i made bios that takes care of overclocking and undervolting, because i was diasappointed with how amd overclocking works on linux (it almost does not )
eth only
windows 29.6Mh/s @ 105w
linux 29.2Mh/s @ 125w
power is card only not whole system, not gpu only.

Any idea why linux has worse performance and more power conspution? I run claymore with exact same parameters.

[Trimegistus]

How stable is this with 6+ video cards?  I cant seem to get all 10 of mine running.

It works fine with 6 

[Xaos-biker]

I see I'm not alone with this error each time devfee tries to connect to cryptonight.usa.nicehash.com, here are my log files if anyone can help...

Everything seems to be OK at the beginning, then the devfee comes :

Code:

15:29:18:608    8bfff700        DevFee: XMR: Stratum - connecting to 'cryptonight.usa.nicehash.com' <169.45.93.83> 

port 3355

...

15:29:18:697    b9466740        GPU0 t=58C fan=60%, GPU1 t=59C fan=60%, GPU2 t=63C fan=35%, GPU3 t=62C fan=27%, GP$
15:29:18:697    b9466740        em hbt: 0, fm hbt: 332,
15:29:18:697    b9466740        watchdog - thread 0, hb time 8613
15:29:18:697    b9466740        watchdog - thread 1, hb time 4161
15:29:18:697    b9466740        watchdog - thread 2, hb time 6386
15:29:18:697    b9466740        watchdog - thread 3, hb time 1935

...

15:29:48:705    b9466740        GPU0 t=58C fan=60%, GPU1 t=57C fan=53%, GPU2 t=60C fan=40%, GPU3 t=62C fan=27%, GP$
15:29:48:705    b9466740        em hbt: 1, fm hbt: 30340,
15:29:48:705    b9466740        watchdog - thread 0, hb time 2996
15:29:48:705    b9466740        watchdog - thread 1, hb time 7452
15:29:48:705    b9466740        watchdog - thread 2, hb time 771
15:29:48:705    b9466740        watchdog - thread 3, hb time 5226

...

15:29:59:891    ac0a4700        got 242 bytes
15:29:59:891    ac0a4700        buf: {"jsonrpc":"2.0","method":"job","params":{"blob":"0101e7e6afd10595cb75c09d497$

15:29:59:891    ac0a4700        parse packet: 241
15:29:59:891    ac0a4700        new buf size: 0
15:29:59:891    ac0a4700        XMR: 12/09/17-15:29:59 - New job from etn-eu1.nanopool.org:13433
15:29:59:891    ac0a4700        target: 0x00008bcf (diff: 1380615203H)
15:29:59:891    ac0a4700        XMR - Total Speed: 808 H/s, Total Shares: 4, Rejected: 0, Time: 00:14
15:29:59:891    ac0a4700        XMR: GPU0 808 H/s


...

15:30:01:290    ae0a8700        Job changed, drop current round
15:30:01:290    ad0a6700        Job changed, drop current round
15:30:01:290    ad8a7700        Job changed, drop current round

...

15:30:18:713    b9466740        GPU0 t=58C fan=60%, GPU1 t=61C fan=22%, GPU2 t=58C fan=40%, GPU3 t=62C fan=27%, GP$
15:30:18:713    b9466740        em hbt: 1, fm hbt: 60348,
15:30:18:713    b9466740        watchdog - thread 0, hb time 3898
15:30:18:713    b9466740        watchdog - thread 1, hb time 8354
15:30:18:713    b9466740        watchdog - thread 2, hb time 1672
15:30:18:713    b9466740        watchdog - thread 3, hb time 6123


...

15:30:48:722    b9466740        GPU0 t=58C fan=60%, GPU1 t=64C fan=64%, GPU2 t=58C fan=40%, GPU3 t=62C fan=27%, GP$
15:30:48:722    b9466740        em hbt: 1, fm hbt: 90357,
15:30:48:722    b9466740        watchdog - thread 0, hb time 7199
15:30:48:722    b9466740        watchdog - thread 1, hb time 2747
15:30:48:722    b9466740        watchdog - thread 2, hb time 4973
15:30:48:722    b9466740        watchdog - thread 3, hb time 519


...

15:30:59:901    ac0a4700        got 242 bytes
15:30:59:901    ac0a4700        buf: {"jsonrpc":"2.0","method":"job","params":{"blob":"0101a3e7afd10595cb75c09d497$

15:30:59:901    ac0a4700        parse packet: 241
15:30:59:901    ac0a4700        new buf size: 0
15:30:59:902    ac0a4700        XMR: 12/09/17-15:30:59 - New job from etn-eu1.nanopool.org:13433
15:30:59:902    ac0a4700        target: 0x00008bcf (diff: 1380615203H)
15:30:59:902    ac0a4700        XMR - Total Speed: 808 H/s, Total Shares: 4, Rejected: 0, Time: 00:15
15:30:59:902    ac0a4700        XMR: GPU0 808 H/s
15:30:59:943    ad0a6700        Job changed, drop current round
15:30:59:943    ad8a7700        Job changed, drop current round
15:30:59:943    ac8a5700        Job changed, drop current round
15:30:59:943    ae0a8700        Job changed, drop current round

...

15:31:18:730    b9466740        GPU0 t=58C fan=60%, GPU1 t=59C fan=60%, GPU2 t=58C fan=40%, GPU3 t=62C fan=27%, GP$
15:31:18:730    b9466740        watchdog - fminer thread hangs
15:31:18:730    b9466740        em hbt: 0, fm hbt: 120365,
15:31:18:730    b9466740        Miner thread hangs, need to restart miner!
15:31:18:730    b9466740        GPU 0 temp = 58, old fan speed = 60, new fan speed = 60

So the miner tries to restart and here are the lines that are not in the same state than previous starting :

Code:

 GPU #0: Ellesmere, 748 MB available, 36 compute units
 card 0, m1 748, m2 512 w 288
 0 m = 0
 Bad performance mode, you need to set GPU_MAX_ALLOC_PERCENT 100
 GPU #0 algorithm ASM, -h 900, -dmem 1 (Memory used: 3780MB)
OpenCL error 0 #101 - -61, cannot create GPU memory buffer
OpenCL error 0 #101a - -61, cannot create GPU memory buffer

Here is what I can read for the first start :

Code:

 GPU #0: Ellesmere, 8055 MB available, 36 compute units
 card 0, m1 8055, m2 4048 w 288
 0 m = 2
 GPU #0 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)

I tried with overclocked bios, with stock ones, tried to remove -dmem 1, tried with other pools... Still the same error... Last week with exactly the same args, I had no problem... I thonk it's due to devfee mining pool but I'm not sure, I have to use -nofee 1 for the moment but I'd prefer find a solution...

Oups I forgot, I mine electroneum ETN with that card

Same problem with HIVE os, its problem  with hacked nicehash only Claymore support can fix it.

[Asgaroth]

Hi,

I seem to be getting the following error popping up about 4 to 5 times whenever claymore starts:

Code:

GPU#0 got incorrect share. If you see this warning often, make sure you did not overclock it too much...

Then I dont see the messages for a while, but, when the dev fee kicks in it switches pools, finishes and tries to pull from my configured pool, then I see the errors 4 or 5 tims again, then nothing for some time, rinse and repeat.

I noticed when claymore starts up it setting the -h parameter to 1800, looking at my hash rate per card it seems to hover around 745 - 748 H/s. Do I need to drop this -h parameter down a bit?

What is the recommended setting for the -h paremeter? I have 2 x AMD PowerColor Red Devil RX 580 Golden Sample with BBT modded BIOS applied, I obtained the BIOS from here.

Any thoughts/tips/suggestions much appreciated.

[JoeBobJr]

Having some issues with this miner. I was using awesome miner which uses the 10.x version and I was getting a ton of share errors. I adjusted the -h many different ways and nothing was working so I started researching. I ran across a couple threads on other sites saying to use t he 9.7 version because it doesn't do very well on the r9 270x models. So I downloaded it and noticed it required 15.12 drivers so I downloaded those removed all the old driver files and installed the new one. I started using the miner and used it a couple days then stopped because I was mining other things. I tried to go back to using this miner again today and now every time I open it crashes. Maybe someone here can point me in a direction how to get this miner working again. Any help would be greatly appreciated.

GPU-Z Info
http://i.epvpimg.com/Pkn2dab.png
http://i.epvpimg.com/AiJvcab.png

And here is the windows log error

http://i.epvpimg.com/uSPPdab.png

I'm not sure why the images or not showing I've used the img tags the forums provides if a moderator sees this please fix the images so they will load int he post. TY!

EDIT: I've wanted to mention also that I've tried sfc/scannow to check windows files making sure they are okay. I've also turned off my Microsoft Security Essentials making sure it wasn't causing the exception. Still no luck. The crazy thing is just a couple days ago this miner was running smooth as hell with no issues at all for several days. As far as I know I haven't changed anything on this desktop in several weeks. Same overclock and all that.

SOLVED: For some reason when you try to mine ETN with claymore 9.7 you can not use the config.txt or the epools.txt. You have to put all the flags in the same line inside the batch file. IF you do not it will crash the miner every single time! Makes absolutely no sense to me but I got it working now after 8 hours messing with this crap!!!

[JoeBobJr]

Hi,

I seem to be getting the following error popping up about 4 to 5 times whenever claymore starts:

Code:

GPU#0 got incorrect share. If you see this warning often, make sure you did not overclock it too much...

Then I dont see the messages for a while, but, when the dev fee kicks in it switches pools, finishes and tries to pull from my configured pool, then I see the errors 4 or 5 tims again, then nothing for some time, rinse and repeat.

I noticed when claymore starts up it setting the -h parameter to 1800, looking at my hash rate per card it seems to hover around 745 - 748 H/s. Do I need to drop this -h parameter down a bit?

What is the recommended setting for the -h paremeter? I have 2 x AMD PowerColor Red Devil RX 580 Golden Sample with BBT modded BIOS applied, I obtained the BIOS from here.

Any thoughts/tips/suggestions much appreciated.

Use the 9.7 version of the miner. You may have to go back to an older version of the drivers it requires 15.12 drivers or at least it recommends them.