Claymore's CryptoNote AMD GPU Miner v11.3

[Pinocchio]

My experience is the same as restless.  On my two gigabyte 270OC, 9.7 is still the best.

11.0
-h 448 -dmem 1 (11.0 default) - OpenCL hang.
-h 512 -dmem 0  - 840h/s
-h 256 -dmem 1 - 810h/s

9.7
-h 512 (default) - 855-860h/s

Similar with me. I have an R9 Nano 4GB, Win 7 x64 OS, 17.12.1 Adrenaline drivers...

V10.2 = 865H/s
V10.2 -h 920 = 875H/s
V11 = 465H/s (dmem autoselection reports 1)
V11 -dmem 0 = 815H/s (uses less than 2GB of VRAM)
V11 -dmem 0 -h 990 = 865H/s (uses around 2.1GB of VRAM, any other -h value reports a lower hash rate)

Weird. Back to v10.2 for the time being, I guess...

[Xlii]

Hi, i am getting
Error: GPUMiner k1a failed -4
i m using RX vega 64

Ver11.0

what can i do?

[entryboy]

WOW,

the 11.st version have only the half performance as 10.2 .

My setting(W7 pro latest driver 17.12.1):

4x fiji (2x Radeon pro duo)

-xpool ssl://xmr-eu1.nanopool.org:14433
-xwal my_long_number
-xpsw my_password
-tt 60,60,60,60
-powlim -21,-21,-21,-21
-h 960,960,960,960
-allpools 1

sorry 11.0 -> 10.2 is better (4x 860 h/s @ 730W)

[iwazamurai]

RX470

v10.2 - 530 H/s
v11 - 330 H/s

wait for the next version.

[ajw7779]

290 flash mod to 290x

10.2 --> 790h/s
11.0 --> 810h/s

so unlike most other users 11 is better for me it seems

[Infpwnz]

Can someone who's mining Electroneum on MiningPoolHub paste their start.bat here please?

[SnOOpeRa]

Ver 11 is a nice improvement over 10.2 , rx 470 4gb 1170/2000/875 was 845h/s in 10.2 ver. , in ver. 11 is 920h/s same settings, as much as sgminer and gatelessgate 896/8/2 , so a very good update.

[restless]

WOW,

the 11.st version have only the half performance as 10.2 .

My setting(W7 pro latest driver 17.12.1):

4x fiji (2x Radeon pro duo)

-xpool ssl://xmr-eu1.nanopool.org:14433
-xwal my_long_number
-xpsw my_password
-tt 60,60,60,60
-powlim -21,-21,-21,-21
-h 960,960,960,960
-allpools 1

sorry 11.0 -> 10.2 is better (4x 860 h/s @ 730W)

Remove your -h setting. New version uses different memory access and optimal -h is different

[restless]

My experience is the same as restless.  On my two gigabyte 270OC, 9.7 is still the best.

11.0
-h 448 -dmem 1 (11.0 default) - OpenCL hang.
-h 512 -dmem 0  - 840h/s
-h 256 -dmem 1 - 810h/s

9.7
-h 512 (default) - 855-860h/s

You get 800h/s from 270 oc-ed ?! What clocks ?! Frankly I don't believe it
I get 480-500 from 270x running 1100/1500...

I also get hangs sometimes with 270x and 11.0 - when the card is main one running the display under Win10. Same card under Win7 runs fine 0-o

[onionpealer]

Can someone who's mining Electroneum on MiningPoolHub paste their start.bat here please?

Here is my Claymore Cryptonote miner configuration for MPH. I found that adding '-mport 0' oddly helped give less rejected shares.
I'm using Claymore's Cryptonote miner for mining Electronium just now as I'm having a bit of a stability problem with SGminer-GM on this machine.

Code:

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner -xpool ssl://europe.cryptonight-hub.miningpoolhub.com:20596 -xwal USER.WORKER -xpsw x -nofee 1 -allpools 1 -ftime 10 -mport 0

[ser_ator]

RX470

v10.2 - 530 H/s
v11 - 330 H/s

wait for the next version.

1.
lads who have lower hash with v11 :

play with -h , -h is to high.you need to find again sweetspot ... downgrade -h  +/- 512   with 4 gb card -dmem 1

2. with 7950 280 card still very high incorect gpu sharre (over 15-20%)

the rest have very low percent & all in gpu 0

[ser_ator]

It's not that bad, it's doing about 400ish with xmr-stak and its rather cheap and easy to find.

Really? What cards are doing 400?  my 560s are doing 450, so with the reduced cost and wattage I'd be very very interested.

450? nice ..

mine  only 340h/s with 992/8

[iwazamurai]

RX470

v10.2 - 530 H/s
v11 - 330 H/s

wait for the next version.

1.
lads who have lower hash with v11 :

play with -h , -h is to high.you need to find again sweetspot ... downgrade -h  +/- 512   with 4 gb card -dmem 1

2. with 7950 280 card still very high incorect gpu sharre (over 15-20%)

the rest have very low percent & all in gpu 0

thanks for your advice about RX470.
But it never goes beyond v10.2. I tried with "-h" from 510 to 515 and around 900. I didn't set "- dmem 1" since default is 1.
The bios is without mod,  and I have no intent to apply mod to the bios, so I stick to v10.2

[infojunkiePHD]

My experience is the same as restless.  On my two gigabyte 270OC, 9.7 is still the best.

11.0
-h 448 -dmem 1 (11.0 default) - OpenCL hang.
-h 512 -dmem 0  - 840h/s
-h 256 -dmem 1 - 810h/s

9.7
-h 512 (default) - 855-860h/s

You get 800h/s from 270 oc-ed ?! What clocks ?! Frankly I don't believe it
I get 480-500 from 270x running 1100/1500...

I also get hangs sometimes with 270x and 11.0 - when the card is main one running the display under Win10. Same card under Win7 runs fine 0-o

Read it closer, restless.  I have two cards, that's 425-430 each.

9.7 'just works' for those of us with pitcairn.

[petrasblynai]

sorry for stupid question 
maybe someone can explain me step by step how to start?
I have https://mymonero.com wallet so I need put in config file and start ? what I should do more ?
thanks, guy!

[onionpealer]

sorry for stupid question  
maybe someone can explain me step by step how to start?
I have https://mymonero.com wallet so I need put in config file and start ? what I should do more ?
thanks, guy!

You need a pool to start with, there are many out there. You could start out with MiningPoolHub www.miningpoolhub.com , support thread https://bitcointalk.org/index.php?topic=472510.0

Now delete everything in the 'start.bat' file (ignore the config.txt file) and put this in the start.bat file, changing the Username/Workername for your specific needs.

Code:

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner -xpool ssl://europe.cryptonight-hub.miningpoolhub.com:20596 -xwal USERNAME.WORKERNAME -xpsw x -allpools 1

[Asgaroth]

I have 2 x PowerColor Red Devil RX-580 Golden Sample 8GB cards mining Electroneum with the following speeds with v11.0

Code:

XMR - Total Speed: 1721 H/s, Total Shares: 442, Rejected: 0, Time: 17:40
XMR: GPU0 858 H/s, GPU1 863 H/s

If I'm not mistaken, I think I was getting around 780/790 H/s per card prior to the update.

BIOS moded with the following reported by rocm-smi:

Code:

====================    ROCm System Management Interface    ====================
================================================================================
 GPU  DID    Temp     AvgPwr   SCLK     MCLK     Fan      Perf    OverDrive  ECC
  1   67df   54.0c    76.111W  1265Mhz  2250Mhz  40.0%    auto      0%       N/A      
  0   67df   62.0c    77.182W  1265Mhz  2250Mhz  40.0%    auto      0%       N/A      
================================================================================
====================           End of ROCm SMI Log          ====================

Wish I could hit the 900+ H/s mark, but I'm not sure what else I could do to improve the speeds.

[notbatman]

^^^ 2k WTF man

[oddity2505]

^^^ 2k WTF man

Seems like a joke. I guess has a vega and 480, making 2k and 1k correspondingly.

[rascabily]

http://prntscr.com/hpmtqb  Asus RX 480 memory samsung v 11 2056 H\s 

this is rx vega 64