new24core
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 413
Merit: 17
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 21, 2017, 09:20:37 PM |
|
Thanks for sharing, what are your voltage settings ?
R9 290 is Gigabyte and its voltage lowered in Afterburner to -50mV and can even less (bios also modified 1000MHz timings for 1250 and 1375); R9 290x is reference flashed with Stilt V3E (DPM7 - 1.1625V); RX580 is -60 mV from default (but recently Afterburner asked for reboot, I pressed Yes, and now voltage control is missing for rx580); That's all I can say about voltages. Thanks ;-) I think to get the higher hash on a 580 you need to giver over 1V. I am trying some settings now...
|
|
|
|
new24core
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 413
Merit: 17
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 21, 2017, 09:33:17 PM |
|
I am struggling to get 1000 h/s.
Also I have to have the voltage quite high and it is still no stable.
At the moment, still unstable, it is not worth while going for 1000 h/s as shown below:-
Hash watts watts/Hash 840 74 0.088095238 1000 100 0.1
|
|
|
|
new24core
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 413
Merit: 17
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 21, 2017, 09:40:07 PM |
|
RX 580 4gb?
Actually it is 480 8GB flashed to 580. What GPU power only draw is GPU-Z showing on your 580 ?
|
|
|
|
new24core
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 413
Merit: 17
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 21, 2017, 10:56:37 PM |
|
ok, after applying the uber mix straps(less extreme - 777000000000000022CC1C00AD615B41C0570E152DCB7409006007000B031420FA8900A00300000 010123A46DB354019) to my 580's, which have Samsung memory, I'm getting 940 h/s.
My settings are :-
-tt 75 -cclock 1200 -mclock 2200 -cvddc 900 -mvddc 940 -h 1024
Does anyone have a decent memory strap for a MSI gaming X 8gb with Hynix memory !?
|
|
|
|
new24core
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 413
Merit: 17
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 21, 2017, 11:29:02 PM |
|
ok, after applying the uber mix straps(less extreme - 777000000000000022CC1C00AD615B41C0570E152DCB7409006007000B031420FA8900A00300000 010123A46DB354019) to my 580's, which have Samsung memory, I'm getting 940 h/s.
My settings are :-
-tt 75 -cclock 1200 -mclock 2200 -cvddc 900 -mvddc 940 -h 1024
Does anyone have a decent memory strap for a MSI gaming X 8gb with Hynix memory !?
ok...Does anyone have a 580 with Hynix memory and getting over 900 h/s mining MXR ?
|
|
|
|
new24core
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 413
Merit: 17
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 21, 2017, 11:49:34 PM |
|
ok, after applying the uber mix straps(less extreme - 777000000000000022CC1C00AD615B41C0570E152DCB7409006007000B031420FA8900A00300000 010123A46DB354019) to my 580's, which have Samsung memory, I'm getting 940 h/s.
My settings are :-
-tt 75 -cclock 1200 -mclock 2200 -cvddc 900 -mvddc 940 -h 1024
Does anyone have a decent memory strap for a MSI gaming X 8gb with Hynix memory !?
ok...Does anyone have a 580 with Hynix memory and getting over 900 h/s mining MXR ? Hi Claymore.......... Why is there such a difference between running on Samsung and Hynix memory ?
|
|
|
|
onionpealer
Jr. Member
Offline
Activity: 238
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 22, 2017, 02:04:27 PM |
|
This software is better for the older cards like Tahiti and Pitcairn if you wanted to mine other coins like ETN
Because with newer version like v10, you sometimes got like 20% rejects with older cards and had to use v9.6
The v9.6 however didn't let you mine coins like ETN. With V11 it seems fixed, the speeds are the same however.
Tahiti cards with Hynix memory get max like 650 H/s.
I've a Sapphire R9 270x 4GB, Pitcairn/Hynix (with modded BIOS), and Claymore's v11 gives a respectable 450 h/s mining Electroneum.
|
|
|
|
ikicha
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 22, 2017, 04:54:36 PM |
|
RX 570 Mem Clock : 2000 MHz Core Clock : 1100 MHz Under Voltage : -100 mV
v.10.1 : 778 H/s v.11.0 : 870 H/s
I think i got good hashrate ( same with Cast-XMR ) , now i tested for 1 day, if stable, i'll report the result, if not i'll change to version 10.1
|
|
|
|
7anonminer7
Newbie
Offline
Activity: 15
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 22, 2017, 05:11:25 PM |
|
Hi! I'm using Claymore's GPU Miner v9.7, running it on Win 7, 64bit. When I get my share rejected (which happens on average once in a 24 hours) by the miner, it seems it doesn't attemp any reconnection. I have to press "s" in the command line window and only then it reconnects.
How can I make it do that automatically? I've read the "Readme!!!.txt" and miner's github docs, but there's nothing about it. Thanks.
|
|
|
|
RoelHG
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 22, 2017, 08:29:45 PM |
|
Hi all,
Is it also possible to mine ETN with claymore within ethos? I tried so many configurations but cannot get claymore to work in my ethos config... is there somebody who's got it working! Would be really nice! Thanks!
|
|
|
|
BSAlex
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 239
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 22, 2017, 10:03:40 PM |
|
Hi! I'm using Claymore's GPU Miner v9.7, running it on Win 7, 64bit. When I get my share rejected (which happens on average once in a 24 hours) by the miner, it seems it doesn't attemp any reconnection. I have to press "s" in the command line window and only then it reconnects.
How can I make it do that automatically? I've read the "Readme!!!.txt" and miner's github docs, but there's nothing about it. Thanks.
Do you try automatic time-based miner reboot? I prefer to run miner no longer then 180 minutes without reboot, else you can expect various issues. The option in config.txt - r 180
|
|
|
|
AlexanderDumas
Newbie
Offline
Activity: 206
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2017, 01:13:23 AM |
|
Worth to test it on vega ?
Some did but didn't share their settings. Interesting to see 1830 on vega 56. -dmem 0 - h 3520 [Profile_0] Name=Vega56 GPU_P0=852;800 GPU_P1=991;900 GPU_P2=1138;950 GPU_P3=1269;1000 GPU_P4=1312;1050 GPU_P5=1474;1100 GPU_P6=1212;905 GPU_P7=1407;950 Mem_P0=167;800 Mem_P1=500;800 Mem_P2=700;900 Mem_P3=950;900 Fan_Min=3500 Fan_Max=4900 Fan_Target=75 Fan_Acoustic=2400 Power_Temp=85 Power_Target=0 Thank you for sharing. I was also able to get, around 1810/20 using your settings (-dmem 0, - h 3520) on the config file. Although in my case the H/s are a sometime oscillating below 1800. using 4 vegas ( 1x64 and 3x56 with mod bios 64) power tables 1100Mhz. I have not used Claymore for more than an hour, but If it is reliable at 1800 Hs, it may be worth it. I normally use Cast and sometime STAK, but they are not reliable, and despite reaching 1950/2000 H/s easily, they crash often enough to bring the day average H/s rates well below 1800. So.... For STAK or Cast, I have all the batch settings to restart the software every 30/40 minutes or to reboot the PC if they crash. It mitigate the issues, yet what a pain and again it bring the day average below 1800 per card.... not mentioning the time it took to get all up and running. Also Cast and STAK out of the box they reach "only" 1800H/s, to get around 2000 it takes quite some tweaks. With this Claymore software, I was up and running in about 10/15 minutes, including the time to browse this forum and find your settings. I use Claymore for Ethereum on another rig and it works for days without interruptions 44Mhs on Vegas and 31Mhs on RX 580, and again I was up and running at the max speed within minutes. Cheers!
|
|
|
|
yobigd20
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 170
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2017, 01:30:11 AM |
|
Claymore' miners readme always says use "Catalyst v15.12" for best hashrates. Is that still the case today? I had always just assumed that was old stuff to be ignored, but is there some magical improvement with using that old driver?
|
|
|
|
vacarosie200
Newbie
Offline
Activity: 45
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2017, 07:58:58 AM |
|
my rx550 cards doesn't work in versions 10 + , th minr start and show hashrate 0. win 10 1079
|
|
|
|
tg88
Legendary
Offline
Activity: 2492
Merit: 1434
Payment Gateway Allows Recurring Payments
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2017, 09:23:04 AM |
|
Version 11 was really good.
The speed increased in all my rigs around 300 to 500 h / s on average. (RX 4xx, 5xx)
Stability has also improved.
|
|
|
|
vacarosie200
Newbie
Offline
Activity: 45
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2017, 03:02:25 PM |
|
also for me work with incresed speed on all card but rx550, that does not work at all
|
|
|
|
Rhunter78
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2017, 05:16:01 PM |
|
First post. I just started mining Eth last week and decided to start mining Etn last night. My rig was super stable using Claymore's Dual Miner v10.2 running 179.5mh/s @ 785 wall wattage with 6x RX 580 Sapphire Pulse 8gb. For some reason using Claymore's Cryptonight v11.0 my rig keeps restarting randomly every 20 minutes or so, and I can't figure out why. I started with the same undervolt and overclocks. I tried increasing my -cvddc and -mvddc, but that hasn't helped. I've checked the log files and can't find any useful error messages. I have -dbg 1 set in start.bat, but it doesn't seem to make any difference in the logs. I don't even know if I'm looking in the right place for error messages.
Could it be that the same GPU tuning isn't playing nice with Cryptonight algo? Right now my start.bat is set -cclock 1150 -cvddc 900 -mvddc 950 (for Eth I was using -cclock 1150 -cvddc 850 -mvddc 900 and it was stable). I'm using MSI AB for memory OCs, each card individually ranging from 2160 to 2250. I haven't changed these settings since the switch. When running I'm getting around 5,300 H/s and roughly 680w at the wall.
Any help will be greatly appreciated. Thanks!
|
|
|
|
a7med918
Newbie
Offline
Activity: 33
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2017, 10:38:56 PM |
|
Dear all i need command line to mine BCN i use old version 9.7 with old line as NsGpuCNMiner -o stratum+tcp://bcn.pool.minergate.com:45550 -u xxxx@gmail.com -p xxxx but when i use it in new version i cant mine and miner closed
|
|
|
|
7anonminer7
Newbie
Offline
Activity: 15
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2017, 10:46:32 PM |
|
Hi! I'm using Claymore's GPU Miner v9.7, running it on Win 7, 64bit. When I get my share rejected (which happens on average once in a 24 hours) by the miner, it seems it doesn't attemp any reconnection. I have to press "s" in the command line window and only then it reconnects.
How can I make it do that automatically? I've read the "Readme!!!.txt" and miner's github docs, but there's nothing about it. Thanks.
Do you try automatic time-based miner reboot? I prefer to run miner no longer then 180 minutes without reboot, else you can expect various issues. The option in config.txt - r 180 Thanks, "-r" option did the job it seems: I've set it to 15 minutes and after another single rejected share the miner proceeded to reconnect without my input.
|
|
|
|
|
|