Claymore's CryptoNote AMD GPU Miner v11.3

[new24core]

Thanks for sharing, what are your voltage settings ?

R9 290 is Gigabyte and its voltage lowered in Afterburner to -50mV and can even less (bios also modified 1000MHz timings for 1250 and 1375);
R9 290x is reference flashed with Stilt V3E (DPM7 - 1.1625V);
RX580 is -60 mV from default (but recently Afterburner asked for reboot, I pressed Yes, and now voltage control is missing for rx580);
That's all I can say about voltages.

Thanks ;-)

I think to get the higher hash on a 580 you need to giver over 1V.

I am trying some settings now...

[new24core]

I am struggling to get 1000 h/s.

Also I have to have the voltage quite high and it is still no stable.

At the moment, still unstable, it is not worth while going for 1000 h/s as shown below:-

Hash   watts   watts/Hash
840   74           0.088095238
1000   100           0.1

[new24core]

RX 580 4gb?

Actually it is 480 8GB flashed to 580.

What GPU power only draw is GPU-Z showing on your 580 ?

[new24core]

ok, after applying the uber mix straps(less extreme - 777000000000000022CC1C00AD615B41C0570E152DCB7409006007000B031420FA8900A00300000 010123A46DB354019) to my 580's, which have Samsung memory, I'm getting 940 h/s.

My settings are :-

-tt 75
-cclock 1200
-mclock 2200
-cvddc 900
-mvddc 940
-h 1024

Does anyone have a decent memory strap for a MSI gaming X 8gb with Hynix memory !?

[new24core]

ok, after applying the uber mix straps(less extreme - 777000000000000022CC1C00AD615B41C0570E152DCB7409006007000B031420FA8900A00300000 010123A46DB354019) to my 580's, which have Samsung memory, I'm getting 940 h/s.

My settings are :-

-tt 75
-cclock 1200
-mclock 2200
-cvddc 900
-mvddc 940
-h 1024

Does anyone have a decent memory strap for a MSI gaming X 8gb with Hynix memory !?

ok...Does anyone have a 580 with Hynix memory and getting over 900 h/s mining MXR ?

[new24core]

ok, after applying the uber mix straps(less extreme - 777000000000000022CC1C00AD615B41C0570E152DCB7409006007000B031420FA8900A00300000 010123A46DB354019) to my 580's, which have Samsung memory, I'm getting 940 h/s.

My settings are :-

-tt 75
-cclock 1200
-mclock 2200
-cvddc 900
-mvddc 940
-h 1024

Does anyone have a decent memory strap for a MSI gaming X 8gb with Hynix memory !?

ok...Does anyone have a 580 with Hynix memory and getting over 900 h/s mining MXR ?

Hi Claymore..........

Why is there such a difference between running on Samsung and Hynix memory ?

[onionpealer]

This software is better for the older cards like Tahiti and Pitcairn if you wanted to mine other coins like ETN

Because with newer version like v10, you sometimes got like 20% rejects with older cards and had to use v9.6

The v9.6 however didn't let you mine coins like ETN. With V11 it seems fixed, the speeds are the same however.

Tahiti cards with Hynix memory get max like 650 H/s.

I've a Sapphire R9 270x 4GB, Pitcairn/Hynix (with modded BIOS), and Claymore's v11 gives a respectable 450 h/s mining Electroneum.

[ikicha]

RX 570
Mem Clock : 2000 MHz
Core Clock : 1100 MHz
Under Voltage : -100 mV

v.10.1 : 778 H/s
v.11.0 : 870 H/s

I think i got good hashrate ( same with Cast-XMR ) , now i tested for 1 day, if stable, i'll report the result, if not i'll change to version 10.1

[7anonminer7]

Hi! I'm using Claymore's GPU Miner v9.7, running it on Win 7, 64bit.
When I get my share rejected (which happens on average once in a 24 hours) by the miner, it seems it doesn't attemp any reconnection. I have to press "s" in the command line window and only then it reconnects.

How can I make it do that automatically? I've read the "Readme!!!.txt" and miner's github docs, but there's nothing about it. Thanks.

[RoelHG]

Hi all,

Is it also possible to mine ETN with claymore within ethos? I tried so many configurations but cannot get claymore to work in my ethos config... is there somebody who's got it working! Would be really nice! Thanks!

[BSAlex]

Hi! I'm using Claymore's GPU Miner v9.7, running it on Win 7, 64bit.
When I get my share rejected (which happens on average once in a 24 hours) by the miner, it seems it doesn't attemp any reconnection. I have to press "s" in the command line window and only then it reconnects.

How can I make it do that automatically? I've read the "Readme!!!.txt" and miner's github docs, but there's nothing about it. Thanks.

Do you try automatic time-based miner reboot? I prefer to run miner no longer then 180 minutes without reboot, else you can expect various issues.
The option in config.txt

- r 180

[AlexanderDumas]

Worth to test it on vega ?

Some did but didn't share their settings. Interesting to see

1830  on vega 56.

-dmem 0
- h 3520

[Profile_0]
Name=Vega56
GPU_P0=852;800
GPU_P1=991;900
GPU_P2=1138;950
GPU_P3=1269;1000
GPU_P4=1312;1050
GPU_P5=1474;1100
GPU_P6=1212;905
GPU_P7=1407;950
Mem_P0=167;800
Mem_P1=500;800
Mem_P2=700;900
Mem_P3=950;900
Fan_Min=3500
Fan_Max=4900
Fan_Target=75
Fan_Acoustic=2400
Power_Temp=85
Power_Target=0

Thank you for sharing.
I was also able to get, around 1810/20 using your settings  (-dmem 0, - h 3520) on the config file.
Although in my case the H/s are a sometime oscillating below 1800. using 4 vegas ( 1x64 and 3x56 with mod bios 64) power tables 1100Mhz.


I have not used Claymore for more than an hour, but If it is reliable at 1800 Hs, it may be worth it.
I normally use Cast and sometime STAK, but they are not reliable, and despite reaching 1950/2000 H/s easily, they crash often enough to bring the day average H/s rates well below 1800. So....
For STAK or Cast, I have all the batch settings to restart the software every 30/40 minutes or to reboot the PC if they crash. It mitigate the issues, yet what a pain and again it bring the day average below 1800 per card.... not mentioning the time it took to get all up and running. Also Cast and STAK out of the box they reach "only" 1800H/s, to get around 2000 it takes quite some tweaks.

With this Claymore software, I was up and running in about 10/15 minutes, including the time to browse this forum and find your settings.
I use Claymore for Ethereum on another rig and it works for days without interruptions 44Mhs on Vegas and 31Mhs on RX 580, and again I was up and running at the max speed within minutes.

Cheers!

[yobigd20]

Claymore' miners readme always says use "Catalyst v15.12" for best hashrates.  Is that still the case today? I had always just assumed that was old stuff to be ignored, but is there some magical improvement with using that old driver?

[vacarosie200]

my rx550 cards doesn't work in versions 10 + , th minr start and show hashrate 0. win 10 1079

[tg88]

Version 11 was really good.

The speed increased in all my rigs around 300 to 500 h / s on average. (RX 4xx, 5xx)

Stability has also improved.

[vacarosie200]

also for me work with incresed speed on all card but rx550, that does not work at all

[Rhunter78]

First post.  I just started mining Eth last week and decided to start mining Etn last night.  My rig was super stable using Claymore's Dual Miner v10.2 running 179.5mh/s @ 785 wall wattage with 6x RX 580 Sapphire Pulse 8gb.  For some reason using Claymore's Cryptonight v11.0 my rig keeps restarting randomly every 20 minutes or so, and I can't figure out why.  I started with the same undervolt and overclocks.  I tried increasing my -cvddc and -mvddc, but that hasn't helped.   I've checked the log files and can't find any useful error messages.  I have -dbg 1 set in start.bat, but it doesn't seem to make any difference in the logs.  I don't even know if I'm looking in the right place for error messages.

Could it be that the same GPU tuning isn't playing nice with Cryptonight algo?  Right now my start.bat is set -cclock 1150 -cvddc 900 -mvddc 950 (for Eth I was using -cclock 1150 -cvddc 850 -mvddc 900 and it was stable).  I'm using MSI AB for memory OCs, each card individually ranging from 2160 to 2250.  I haven't changed these settings since the switch.  When running I'm getting around 5,300 H/s and roughly 680w at the wall.  

Any help will be greatly appreciated.  Thanks!

[a7med918]

Dear all
i need command line to mine BCN  i use old version 9.7 with old line as

NsGpuCNMiner -o stratum+tcp://bcn.pool.minergate.com:45550 -u xxxx@gmail.com -p xxxx


but when i use it in new version i cant mine and miner closed

[7anonminer7]

Hi! I'm using Claymore's GPU Miner v9.7, running it on Win 7, 64bit.
When I get my share rejected (which happens on average once in a 24 hours) by the miner, it seems it doesn't attemp any reconnection. I have to press "s" in the command line window and only then it reconnects.

How can I make it do that automatically? I've read the "Readme!!!.txt" and miner's github docs, but there's nothing about it. Thanks.

Do you try automatic time-based miner reboot? I prefer to run miner no longer then 180 minutes without reboot, else you can expect various issues.
The option in config.txt

- r 180

Thanks, "-r" option did the job it seems: I've set it to 15 minutes and after another single rejected share the miner proceeded to reconnect without my input.

[rascabily]

http://prntscr.com/hrl5km

why only this?
 rx 480 and 470  4gb and 8gb sctock, no mod. problem?