Claymore's CryptoNote AMD GPU Miner v11.3

[BSAlex]

Hi guys,
  I've an AMD Radeon R7 360 2gb.
This is my first mining test (next is to build a rig) in Windows 7 x64 fully updated.
I've installed latest Amd 17.12.2 Adrenalin driver (clean installation).
Windows Virtual Memory size is 16gb.
Stock clock/voltage.
"MYWALLET" is only for hide my real Monero Wallet

start.bat:

Code:

set GPU_FORCE_64BIT_PTR=1
set GPU_MAX_HEAP_SIZE=100
set GPU_USE_SYNC_OBJECTS=1
set GPU_MAX_ALLOC_PERCENT=100
set GPU_SINGLE_ALLOC_PERCENT=100

NsGpuCNMiner.exe -xpool stratum+tcp://xmr-eu2.nanopool.org:14444 -xwal "MYWALLET".testpc/testemail -xpsw x -tstop 85 -tt 65 -fanmin 65 -fanmax 100

log:

Code:

00:15:48:867	e34	args: -xpool stratum+tcp://xmr-eu2.nanopool.org:14444 -xwal "MYWALLET".testpc/testemail -xpsw x -tstop 85 -tt 65 -fanmin 65 -fanmax 100 
00:15:48:868	e34	
00:15:48:870	e34	ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
00:15:48:871	e34	º           Claymore's CryptoNote AMD GPU Miner v11.0            º
00:15:48:872	e34	ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
00:15:48:874	e34	
00:15:48:875	e34	b517
00:15:49:078	e34	XMR: 1 pool is specified
00:15:49:079	e34	Main Monero pool is xmr-eu2.nanopool.org:14444
00:15:49:269	e34	OpenCL platform: AMD Accelerated Parallel Processing
00:15:49:276	e34	OpenCL initializing...
00:15:49:278	e34	driver 10.0.2527.7
00:15:49:279	e34	AMD Cards available: 1 
00:15:49:281	e34	GPU #0: Bonaire, 2048 MB available, 12 compute units
00:15:49:282	e34	card 0, m1 2048, m2 1792 w 96
00:15:49:283	e34	POOL version
00:15:49:284	e34	b141 
00:15:49:286	e34	Platform: Windows
[b][s]00:15:49:445	e34	No ASM binary found for GPU 0[/s][/b]
00:15:49:831	e34	GPU #0 algorithm ASM, -h 768, -dmem 0 (Memory used: 1574MB)
00:15:49:833	e34	Total cards: 1 
00:16:04:246	e34	Watchdog enabled
00:16:04:247	e34	Remote management (READ-ONLY MODE) is enabled on port 3333
00:16:04:249	e34	

00:16:04:344	1e84	XMR: Stratum - connecting to 'xmr-eu2.nanopool.org' <92.222.180.118> port 14444 (unsecure)
00:16:04:379	1e84	send: {"method": "login", "params": {"login": ""MYWALLET".testpc/testemail: "x", "agent": "xmr/1.0"}, "id": 1}

00:16:04:381	1e84	XMR: Stratum - Connected (xmr-eu2.nanopool.org:14444) (unsecure)
00:16:04:442	1e84	got 279 bytes
00:16:04:443	1e84	buf: {"id":1,"jsonrpc":"2.0","result":{"id":"1","job":{"blob":"06069ebca0d205d7bf63c28d47e39655e9c2e72c76dbba342f73feb1683760dccb23140a0c6044000000008295bbcefa253ed045a65811c2b910bc5fbafaa28a02dfc08bcc31bc9770d53618","job_id":"31591","target":"cf8b0000"},"status":"OK"},"error":null}

00:16:04:443	1e84	parse packet: 278
00:16:04:444	1e84	new buf size: 0
00:16:07:251	e34	ADL: Cannot find any AMD adapters
00:16:10:254	e34	ADL: Cannot find any AMD adapters
00:16:13:256	e34	ADL: Cannot find any AMD adapters
00:16:16:258	e34	ADL: Cannot find any AMD adapters
00:16:19:260	e34	ADL: Cannot find any AMD adapters
00:16:22:262	e34	ADL: Cannot find any AMD adapters
00:16:25:264	e34	ADL: Cannot find any AMD adapters
00:16:28:267	e34	ADL: Cannot find any AMD adapters
00:16:31:269	e34	ADL: Cannot find any AMD adapters
00:16:34:271	e34	ADL: Cannot find any AMD adapters
00:16:34:274	e34	ADL: Cannot find any AMD adapters
00:16:34:275	e34	em hbt: 0, fm hbt: 31, 
00:16:34:275	e34	watchdog - thread 0, hb time 796
00:16:34:276	e34	watchdog - thread 1, hb time 796
00:16:34:277	e34	watchdog - thread 2, hb time 796
00:16:34:278	e34	watchdog - thread 3, hb time 796
00:16:37:280	e34	ADL: Cannot find any AMD adapters
00:16:37:825	1e84	got 243 bytes
00:16:37:826	1e84	buf: {"jsonrpc":"2.0","method":"job","params":{"blob":"0606dbbca0d205d7bf63c28d47e39655e9c2e72c76dbba342f73feb1683760dccb23140a0c604400000000fa4b7b5032d255ee5f903dd67df92165f0b447ff86f05d7a661110d9f2274ddb17","job_id":"31592","target":"cf8b0000"}}

00:16:37:826	1e84	parse packet: 242
00:16:37:827	1e84	new buf size: 0
00:16:37:829	1e84	XMR: 12/31/17-00:16:37 - New job from xmr-eu2.nanopool.org:14444
00:16:37:830	1e84	target: 0x00008bcf (diff: 120001H)
00:16:37:831	1e84	XMR - Total Speed: 0 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
00:16:37:832	1e84	XMR: GPU0 0 H/s
00:16:40:282	e34	ADL: Cannot find any AMD adapters
00:16:43:284	e34	ADL: Cannot find any AMD adapters
00:16:46:287	e34	ADL: Cannot find any AMD adapters
00:16:49:289	e34	ADL: Cannot find any AMD adapters
00:16:51:061	195c	Quit...

Please, can somebody help me?
Thank you!

Please note that the card is no longer supported with CCNM 11.0

00:15:49:445   e34   No ASM binary found for GPU 0

Try to use 9.7 version.

[1714605113]

1714605113

[1714605113]

1714605113

[1714605113]

1714605113

[1714605113]

1714605113

[1714605113]

1714605113

[ikicha]

v11 is way more stable than a previous once. Rigs going for days. Now if only the speed would get closer to competition.

Agree with you
V.11 is stable and i get higher hashrate, previous version i get 700 H/s for RX570, now i get about 800-850 H/s
Great job for dev, always better 

[ilmoro]

Hi, RX 570 owner. Tried to mine Intensecoin but the batch stops just after the start. I cannot see any info except my batch string.

NsGpuCNMiner -o stratum+tcp://intense.miningpools.us:3333 -u <wallet> -p x -allpools 1

Tried to add -dbg 1 but nothing changes, no log file has been generated.

I´m using Claymore´s Dual daily and it worked perfectly with ETH.

Any ideas?

Debug files are set to 1 by default. i use

Code:

-dgb -1

to disable it

Debug file are set to 0 by default and there is no reason to disable them with -1 in my case!

[ilmoro]

Ok,this morning everything start running smooth!   

[trooperx]

These cards are so random!  I've managed to get the Gigabyte RX580's up to around 890H/s.  But the new MSI Armor 580's with uber mix strap 3.1 are only pushing 818 H/s!!  I thought they would do much better.

This is a frustrating hobby!!

Apparently some folks don't have the compute option turned on.


edit:

I found this for all you folks who don't use Ubuntu 16.04 64-bit.

   GPU Workload

    A new toggle in Radeon Settings that can be found under the "Gaming", "Global Settings" options. This toggle will allow you to switch optimization between graphics or compute workloads on select Radeon RX 500, Radeon RX 400, Radeon R9 390, Radeon R9 380, Radeon R9 290 and Radeon R9 285 series graphics products.

    Compute Support

    Radeon Software now supports compute workloads for up to 12 installed Radeon RX 400, Radeon RX 500 or Radeon RX Vega series graphics products on Windows®10 system configurations.

-- https://overclock3d.net/news/gpu_displays/amd_adds_compute_mode_and_support_for_up_to_12_different_gpus_with_their_latest_gaming_driver/1

edit2:

I bet MS had to twist their arm to get them to do that...

The drivers needed to use this option actually slowed my hash rates down!

[carafleur]

Firstly, thanks to Claymore for the improvements here! On most of my rx 470 4GB cards, I am seeing about a 3-4% increase in hash-rate!

However, I was hoping v11 would also alleviate an issue I've been seeing since starting to use v10.2 a while ago.  For some reason, GPU 0 on all 4 of my rigs acts very strangely... most of the time hashing well below the others... fluctuating between 0 and 450, while the other 5 are right at the 700 mark.  Now, if this were only on 1 rig I would think the GPU is going bad, but since it is the exact same GPU slot 0 on all 4 rigs, it is more likely some kind of setting that i need to tweak.

Has anyone else noticed this on their rigs?  If so, any suggestions on how to fix it?

FYI: after just upgrading all 4 rigs to v11.0, GPUs 1-5 are hashing better by about 3-4% but GPU 0 is still bad on all 4. Although, it doesn't seem to be fluctuating as much... pretty much stuck at 232 on 3 rigs and weirdly, 120 on the 4th.

Any help resolving this would be much appreciated!

When Claymore miner starts, you will see GPU0 has a few less MB than other same cards.

Code:

GPU #0: Pitcairn, 1975 MB available, 20 compute units
GPU #0 recognized as Radeon 270/270X
GPU #1: Pitcairn, 1984 MB available, 20 compute units
GPU #1 recognized as Radeon 270/270X
GPU #2: Pitcairn, 1984 MB available, 20 compute units
GPU #2 recognized as Radeon 270/270X
GPU #3: Pitcairn, 1984 MB available, 20 compute units
GPU #3 recognized as Radeon 270/270X

Try to lower the -h parameter for GPU0

Thanks a ton for that tip! even though my GPU 0 was showing exactly the same MB available as other 5 GPUs I still gave your method a shot.  on startup, all were at -h value auto of 892, so I lowered GPU 0 to 812 as a test and it worked immediately!  Got that card up to 672 (from 120)!  I may play with it and inch up a bit but that's already a huge improvement! Now i will make that same change to my other rigs! Thanks again! Really appreciate it!

I'm glad to help !

Testing again and again when a card doesn't work like you think it should
But sometimes a card is really lower than others : I have 2 Sph R9 290 ref board, one running at 700 H/s no matter how I overclock, the other at 810 H/s @1040/1500 . Flashing bios didn't help so far...

Anyway, if you feel like sending me some ETN, feel free to do so !

Code:

f4VR7QEKoHSNCosFG21EReQ3nS8TPxTUzHCzmFJ6trNe3KHG9rAKhq3F8AYWdLyCe7bLrPbKAX9seMhUmbRcCsxz9SBnNYMgfFk5JkJ9kqCst

Everyone have a lovely last 2017 day !

#Share #Data #Love

[7anonminer7]

v11 is way more stable than a previous once. Rigs going for days. Now if only the speed would get closer to competition.

Consider yourself lucky. This version keeps crashing my rig so it needs hard reset every 24 hours or even more frequently. I'm getting rid of it for now. Not to mention Claymore "realised" there was a "bug" that resulted in dropping old jobs with delay:

Check GPU load in gpu-z (must be 100% all the time).
I will do some tests in 1-2 days to confirm that the miner produces correct number of shares, though I already did it for v11.

UPD: It seems I found the reason, when pool sends new job, v11.0 drops old job too late (loses 1-2 sec). I have fixed this bug but it will take 1-2 days to test it properly and release an update. However, you can test a fix right now if you want and tell me if it helps:
https://mega.nz/#!TlYQAJSZ!291Swk4GbJLC5JYmax_fc-tLWjfwKsFTnOUSVGqsDlA

It's been almost 5 days and no update from Claymore.

[Dpminer]

quick question,

do i need to have adl library installed for cclock and mclock to work ?

because the command for overclock are not working on my rigs.

any quick tuto to how to install adl library under ubuntu would be much apreciated!

Thank you

[Claymore]

v11.1

- fixed issue with stale shares, now effective hashrate must be higher.
- a few minor improvements.

PS. Linux version will be available in a few days.

[notbatman]

v11.1

- fixed issue with stale shares, now effective hashrate must be higher.
- a few minor improvements.

PS. Linux version will be available in a few days.

There's an issue with nicehash causing segmentation fault under Linux. I've had to stop using your miner because of it.


screen-shot:

[Claymore]

There's an issue with nicehash causing segmentation fault under Linux. I've had to stop using your miner because of it.

Ok I'll check it.

[UnclWish]

Is 11.1 can handle fan/temp/clocks info/control with new adrenalin 17.12.x drivers?

[Coinerrr]

v11.1

- fixed issue with stale shares, now effective hashrate must be higher.
- a few minor improvements.

PS. Linux version will be available in a few days.

Is this the same as the one you posted earlier (updated) or is 11.1 different?

[Grinner888]

Anyone know why this can be?

XMR - Total Speed: 5537 H/s, Total Shares: 1(0+1+0+0+0+0), Rejected: 0, Time: 00:00
XMR: GPU0 953 H/s, GPU1 953 H/s, GPU2 954 H/s, GPU3 770 H/s, GPU4 954 H/s, GPU5 953 H/s

Note the 770 (will go to 0 aswell), all same cards, all same bios all same clocks. With claymore 9.7 all fine. Anyone has an idea on how to crank this one up aswell?

check your afterburner settings, sometimes one card goes back to default

[Claymore]

Is 11.1 can handle fan/temp/clocks info/control with new adrenalin 17.12.x drivers?

No. Fix from AMD is required, we have to wait it. Or I will have to do their job again and find some workaround.

Is this the same as the one you posted earlier (updated) or is 11.1 different?

It's different, a bit better.

[UnclWish]

Is 11.1 can handle fan/temp/clocks info/control with new adrenalin 17.12.x drivers?

No. Fix from AMD is required, we have to wait it. Or I will have to do their job again and find some workaround.

Allready a month has passed. Maybe it's time to stop waiting AMD and find some workaround? It's the great chance that this AMD bug will stay a long time...

[Spreader1]

Pls mister Claymore include RX 550 support (lexa) ; i have a lot of them and i get 420h/s with 9.7
i want more than maximum 10 gpu per sistem; and hopefully a little speed bump

[Csouza]

Pls mister Claymore include RX 550 support (lexa) ; i have a lot of them and i get 420h/s with 9.7
i want more than maximum 10 gpu per sistem; and hopefully a little speed bump

420 whit a 550 UAL!!!! what model of yours 550 ?

[Claymore]

Is 11.1 can handle fan/temp/clocks info/control with new adrenalin 17.12.x drivers?

No. Fix from AMD is required, we have to wait it. Or I will have to do their job again and find some workaround.

Allready a month has passed. Maybe it's time to stop waiting AMD and find some workaround? It's the great chance that this AMD bug will stay a long time...

That's AMD... Ok I will create a workaround, it will take 1-2 days.

[iRonNuke]

Anyone here running Claymore CryptoNote on Vega card(s)? What hashrates do you get? Any tweaks to get higher hashrates? I got a hashrate at 1680-1710, is that good or bad?