BSAlex
Member
Offline
Activity: 239
Merit: 10
|
|
December 31, 2017, 08:56:39 AM |
|
Hi guys, I've an AMD Radeon R7 360 2gb. This is my first mining test (next is to build a rig) in Windows 7 x64 fully updated. I've installed latest Amd 17.12.2 Adrenalin driver (clean installation). Windows Virtual Memory size is 16gb. Stock clock/voltage. "MYWALLET" is only for hide my real Monero Wallet start.bat: set GPU_FORCE_64BIT_PTR=1 set GPU_MAX_HEAP_SIZE=100 set GPU_USE_SYNC_OBJECTS=1 set GPU_MAX_ALLOC_PERCENT=100 set GPU_SINGLE_ALLOC_PERCENT=100
NsGpuCNMiner.exe -xpool stratum+tcp://xmr-eu2.nanopool.org:14444 -xwal "MYWALLET".testpc/testemail -xpsw x -tstop 85 -tt 65 -fanmin 65 -fanmax 100
log: 00:15:48:867 e34 args: -xpool stratum+tcp://xmr-eu2.nanopool.org:14444 -xwal "MYWALLET".testpc/testemail -xpsw x -tstop 85 -tt 65 -fanmin 65 -fanmax 100 00:15:48:868 e34 00:15:48:870 e34 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» 00:15:48:871 e34 º Claymore's CryptoNote AMD GPU Miner v11.0 º 00:15:48:872 e34 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 00:15:48:874 e34 00:15:48:875 e34 b517 00:15:49:078 e34 XMR: 1 pool is specified 00:15:49:079 e34 Main Monero pool is xmr-eu2.nanopool.org:14444 00:15:49:269 e34 OpenCL platform: AMD Accelerated Parallel Processing 00:15:49:276 e34 OpenCL initializing... 00:15:49:278 e34 driver 10.0.2527.7 00:15:49:279 e34 AMD Cards available: 1 00:15:49:281 e34 GPU #0: Bonaire, 2048 MB available, 12 compute units 00:15:49:282 e34 card 0, m1 2048, m2 1792 w 96 00:15:49:283 e34 POOL version 00:15:49:284 e34 b141 00:15:49:286 e34 Platform: Windows [b][s]00:15:49:445 e34 No ASM binary found for GPU 0[/s][/b] 00:15:49:831 e34 GPU #0 algorithm ASM, -h 768, -dmem 0 (Memory used: 1574MB) 00:15:49:833 e34 Total cards: 1 00:16:04:246 e34 Watchdog enabled 00:16:04:247 e34 Remote management (READ-ONLY MODE) is enabled on port 3333 00:16:04:249 e34
00:16:04:344 1e84 XMR: Stratum - connecting to 'xmr-eu2.nanopool.org' <92.222.180.118> port 14444 (unsecure) 00:16:04:379 1e84 send: {"method": "login", "params": {"login": ""MYWALLET".testpc/testemail: "x", "agent": "xmr/1.0"}, "id": 1}
00:16:04:381 1e84 XMR: Stratum - Connected (xmr-eu2.nanopool.org:14444) (unsecure) 00:16:04:442 1e84 got 279 bytes 00:16:04:443 1e84 buf: {"id":1,"jsonrpc":"2.0","result":{"id":"1","job":{"blob":"06069ebca0d205d7bf63c28d47e39655e9c2e72c76dbba342f73feb1683760dccb23140a0c6044000000008295bbcefa253ed045a65811c2b910bc5fbafaa28a02dfc08bcc31bc9770d53618","job_id":"31591","target":"cf8b0000"},"status":"OK"},"error":null}
00:16:04:443 1e84 parse packet: 278 00:16:04:444 1e84 new buf size: 0 00:16:07:251 e34 ADL: Cannot find any AMD adapters 00:16:10:254 e34 ADL: Cannot find any AMD adapters 00:16:13:256 e34 ADL: Cannot find any AMD adapters 00:16:16:258 e34 ADL: Cannot find any AMD adapters 00:16:19:260 e34 ADL: Cannot find any AMD adapters 00:16:22:262 e34 ADL: Cannot find any AMD adapters 00:16:25:264 e34 ADL: Cannot find any AMD adapters 00:16:28:267 e34 ADL: Cannot find any AMD adapters 00:16:31:269 e34 ADL: Cannot find any AMD adapters 00:16:34:271 e34 ADL: Cannot find any AMD adapters 00:16:34:274 e34 ADL: Cannot find any AMD adapters 00:16:34:275 e34 em hbt: 0, fm hbt: 31, 00:16:34:275 e34 watchdog - thread 0, hb time 796 00:16:34:276 e34 watchdog - thread 1, hb time 796 00:16:34:277 e34 watchdog - thread 2, hb time 796 00:16:34:278 e34 watchdog - thread 3, hb time 796 00:16:37:280 e34 ADL: Cannot find any AMD adapters 00:16:37:825 1e84 got 243 bytes 00:16:37:826 1e84 buf: {"jsonrpc":"2.0","method":"job","params":{"blob":"0606dbbca0d205d7bf63c28d47e39655e9c2e72c76dbba342f73feb1683760dccb23140a0c604400000000fa4b7b5032d255ee5f903dd67df92165f0b447ff86f05d7a661110d9f2274ddb17","job_id":"31592","target":"cf8b0000"}}
00:16:37:826 1e84 parse packet: 242 00:16:37:827 1e84 new buf size: 0 00:16:37:829 1e84 XMR: 12/31/17-00:16:37 - New job from xmr-eu2.nanopool.org:14444 00:16:37:830 1e84 target: 0x00008bcf (diff: 120001H) 00:16:37:831 1e84 XMR - Total Speed: 0 H/s, Total Shares: 0, Rejected: 0, Time: 00:00 00:16:37:832 1e84 XMR: GPU0 0 H/s 00:16:40:282 e34 ADL: Cannot find any AMD adapters 00:16:43:284 e34 ADL: Cannot find any AMD adapters 00:16:46:287 e34 ADL: Cannot find any AMD adapters 00:16:49:289 e34 ADL: Cannot find any AMD adapters 00:16:51:061 195c Quit...
Please, can somebody help me? Thank you! Please note that the card is no longer supported with CCNM 11.0 00:15:49:445 e34 No ASM binary found for GPU 0Try to use 9.7 version.
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
ikicha
|
|
December 31, 2017, 09:25:45 AM |
|
v11 is way more stable than a previous once. Rigs going for days. Now if only the speed would get closer to competition.
Agree with you V.11 is stable and i get higher hashrate, previous version i get 700 H/s for RX570, now i get about 800-850 H/s Great job for dev, always better
|
|
|
|
ilmoro
Newbie
Offline
Activity: 6
Merit: 0
|
|
December 31, 2017, 10:32:08 AM |
|
Hi, RX 570 owner. Tried to mine Intensecoin but the batch stops just after the start. I cannot see any info except my batch string.
NsGpuCNMiner -o stratum+tcp://intense.miningpools.us:3333 -u <wallet> -p x -allpools 1
Tried to add -dbg 1 but nothing changes, no log file has been generated.
I´m using Claymore´s Dual daily and it worked perfectly with ETH.
Any ideas?
Debug files are set to 1 by default. i use to disable it Debug file are set to 0 by default and there is no reason to disable them with -1 in my case!
|
|
|
|
ilmoro
Newbie
Offline
Activity: 6
Merit: 0
|
|
December 31, 2017, 11:00:39 AM |
|
Ok,this morning everything start running smooth!
|
|
|
|
trooperx
Newbie
Offline
Activity: 18
Merit: 0
|
|
December 31, 2017, 11:12:42 AM |
|
These cards are so random! I've managed to get the Gigabyte RX580's up to around 890H/s. But the new MSI Armor 580's with uber mix strap 3.1 are only pushing 818 H/s!! I thought they would do much better.
This is a frustrating hobby!!
Apparently some folks don't have the compute option turned on. edit: I found this for all you folks who don't use Ubuntu 16.04 64-bit. GPU Workload
A new toggle in Radeon Settings that can be found under the "Gaming", "Global Settings" options. This toggle will allow you to switch optimization between graphics or compute workloads on select Radeon RX 500, Radeon RX 400, Radeon R9 390, Radeon R9 380, Radeon R9 290 and Radeon R9 285 series graphics products.
Compute Support
Radeon Software now supports compute workloads for up to 12 installed Radeon RX 400, Radeon RX 500 or Radeon RX Vega series graphics products on Windows®10 system configurations. -- https://overclock3d.net/news/gpu_displays/amd_adds_compute_mode_and_support_for_up_to_12_different_gpus_with_their_latest_gaming_driver/1edit2: I bet MS had to twist their arm to get them to do that... The drivers needed to use this option actually slowed my hash rates down!
|
|
|
|
carafleur
Member
Offline
Activity: 113
Merit: 10
lost@bitcoinica.com
|
|
December 31, 2017, 01:05:17 PM |
|
Firstly, thanks to Claymore for the improvements here! On most of my rx 470 4GB cards, I am seeing about a 3-4% increase in hash-rate!
However, I was hoping v11 would also alleviate an issue I've been seeing since starting to use v10.2 a while ago. For some reason, GPU 0 on all 4 of my rigs acts very strangely... most of the time hashing well below the others... fluctuating between 0 and 450, while the other 5 are right at the 700 mark. Now, if this were only on 1 rig I would think the GPU is going bad, but since it is the exact same GPU slot 0 on all 4 rigs, it is more likely some kind of setting that i need to tweak.
Has anyone else noticed this on their rigs? If so, any suggestions on how to fix it?
FYI: after just upgrading all 4 rigs to v11.0, GPUs 1-5 are hashing better by about 3-4% but GPU 0 is still bad on all 4. Although, it doesn't seem to be fluctuating as much... pretty much stuck at 232 on 3 rigs and weirdly, 120 on the 4th.
Any help resolving this would be much appreciated!
When Claymore miner starts, you will see GPU0 has a few less MB than other same cards. GPU #0: Pitcairn, 1975 MB available, 20 compute units GPU #0 recognized as Radeon 270/270X GPU #1: Pitcairn, 1984 MB available, 20 compute units GPU #1 recognized as Radeon 270/270X GPU #2: Pitcairn, 1984 MB available, 20 compute units GPU #2 recognized as Radeon 270/270X GPU #3: Pitcairn, 1984 MB available, 20 compute units GPU #3 recognized as Radeon 270/270X
Try to lower the -h parameter for GPU0 Thanks a ton for that tip! even though my GPU 0 was showing exactly the same MB available as other 5 GPUs I still gave your method a shot. on startup, all were at -h value auto of 892, so I lowered GPU 0 to 812 as a test and it worked immediately! Got that card up to 672 (from 120)! I may play with it and inch up a bit but that's already a huge improvement! Now i will make that same change to my other rigs! Thanks again! Really appreciate it! I'm glad to help ! Testing again and again when a card doesn't work like you think it should But sometimes a card is really lower than others : I have 2 Sph R9 290 ref board, one running at 700 H/s no matter how I overclock, the other at 810 H/s @1040/1500 . Flashing bios didn't help so far... Anyway, if you feel like sending me some ETN, feel free to do so ! f4VR7QEKoHSNCosFG21EReQ3nS8TPxTUzHCzmFJ6trNe3KHG9rAKhq3F8AYWdLyCe7bLrPbKAX9seMhUmbRcCsxz9SBnNYMgfFk5JkJ9kqCst Everyone have a lovely last 2017 day ! #Share #Data #Love
|
“We build but to tear down. Most of our work and resource is squandered. Our onward march is marked by devastation. Everywhere there is an appalling loss of time, effort and life. A cheerless view, but true" “Most certainly, some planets are not inhabited, but others are, and among these there must exist life under all conditions and phases of development.” Tesla N
|
|
|
7anonminer7
Newbie
Offline
Activity: 15
Merit: 0
|
|
December 31, 2017, 01:29:40 PM |
|
v11 is way more stable than a previous once. Rigs going for days. Now if only the speed would get closer to competition.
Consider yourself lucky. This version keeps crashing my rig so it needs hard reset every 24 hours or even more frequently. I'm getting rid of it for now. Not to mention Claymore "realised" there was a "bug" that resulted in dropping old jobs with delay: Check GPU load in gpu-z (must be 100% all the time). I will do some tests in 1-2 days to confirm that the miner produces correct number of shares, though I already did it for v11. UPD: It seems I found the reason, when pool sends new job, v11.0 drops old job too late (loses 1-2 sec). I have fixed this bug but it will take 1-2 days to test it properly and release an update. However, you can test a fix right now if you want and tell me if it helps: https://mega.nz/#!TlYQAJSZ!291Swk4GbJLC5JYmax_fc-tLWjfwKsFTnOUSVGqsDlAIt's been almost 5 days and no update from Claymore.
|
|
|
|
Dpminer
Newbie
Offline
Activity: 10
Merit: 0
|
|
December 31, 2017, 02:06:22 PM |
|
quick question,
do i need to have adl library installed for cclock and mclock to work ?
because the command for overclock are not working on my rigs.
any quick tuto to how to install adl library under ubuntu would be much apreciated!
Thank you
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
December 31, 2017, 03:26:45 PM |
|
v11.1
- fixed issue with stale shares, now effective hashrate must be higher. - a few minor improvements.
PS. Linux version will be available in a few days.
|
|
|
|
notbatman
Legendary
Offline
Activity: 2212
Merit: 1038
|
|
December 31, 2017, 09:05:09 PM |
|
v11.1
- fixed issue with stale shares, now effective hashrate must be higher. - a few minor improvements.
PS. Linux version will be available in a few days.
There's an issue with nicehash causing segmentation fault under Linux. I've had to stop using your miner because of it. screen-shot:
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
December 31, 2017, 10:36:53 PM |
|
There's an issue with nicehash causing segmentation fault under Linux. I've had to stop using your miner because of it.
Ok I'll check it.
|
|
|
|
UnclWish
|
|
December 31, 2017, 11:48:47 PM |
|
Is 11.1 can handle fan/temp/clocks info/control with new adrenalin 17.12.x drivers?
|
|
|
|
Coinerrr
Newbie
Offline
Activity: 10
Merit: 0
|
|
January 01, 2018, 12:30:43 AM |
|
v11.1
- fixed issue with stale shares, now effective hashrate must be higher. - a few minor improvements.
PS. Linux version will be available in a few days.
Is this the same as the one you posted earlier (updated) or is 11.1 different?
|
|
|
|
Grinner888
Newbie
Offline
Activity: 20
Merit: 0
|
|
January 01, 2018, 08:17:59 AM |
|
Anyone know why this can be?
XMR - Total Speed: 5537 H/s, Total Shares: 1(0+1+0+0+0+0), Rejected: 0, Time: 00:00 XMR: GPU0 953 H/s, GPU1 953 H/s, GPU2 954 H/s, GPU3 770 H/s, GPU4 954 H/s, GPU5 953 H/s
Note the 770 (will go to 0 aswell), all same cards, all same bios all same clocks. With claymore 9.7 all fine. Anyone has an idea on how to crank this one up aswell?
check your afterburner settings, sometimes one card goes back to default
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
January 01, 2018, 10:47:58 AM |
|
Is 11.1 can handle fan/temp/clocks info/control with new adrenalin 17.12.x drivers?
No. Fix from AMD is required, we have to wait it. Or I will have to do their job again and find some workaround. Is this the same as the one you posted earlier (updated) or is 11.1 different?
It's different, a bit better.
|
|
|
|
UnclWish
|
|
January 01, 2018, 11:17:05 AM |
|
Is 11.1 can handle fan/temp/clocks info/control with new adrenalin 17.12.x drivers?
No. Fix from AMD is required, we have to wait it. Or I will have to do their job again and find some workaround. Allready a month has passed. Maybe it's time to stop waiting AMD and find some workaround? It's the great chance that this AMD bug will stay a long time...
|
|
|
|
Spreader1
Newbie
Offline
Activity: 14
Merit: 0
|
|
January 01, 2018, 12:01:15 PM |
|
Pls mister Claymore include RX 550 support (lexa) ; i have a lot of them and i get 420h/s with 9.7 i want more than maximum 10 gpu per sistem; and hopefully a little speed bump
|
|
|
|
Csouza
Member
Offline
Activity: 118
Merit: 10
|
|
January 01, 2018, 01:07:05 PM |
|
Pls mister Claymore include RX 550 support (lexa) ; i have a lot of them and i get 420h/s with 9.7 i want more than maximum 10 gpu per sistem; and hopefully a little speed bump
420 whit a 550 UAL!!!! what model of yours 550 ?
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
January 01, 2018, 02:34:20 PM |
|
Is 11.1 can handle fan/temp/clocks info/control with new adrenalin 17.12.x drivers?
No. Fix from AMD is required, we have to wait it. Or I will have to do their job again and find some workaround. Allready a month has passed. Maybe it's time to stop waiting AMD and find some workaround? It's the great chance that this AMD bug will stay a long time... That's AMD... Ok I will create a workaround, it will take 1-2 days.
|
|
|
|
iRonNuke
Jr. Member
Offline
Activity: 98
Merit: 6
|
|
January 01, 2018, 06:43:10 PM |
|
Anyone here running Claymore CryptoNote on Vega card(s)? What hashrates do you get? Any tweaks to get higher hashrates? I got a hashrate at 1680-1710, is that good or bad?
|
|
|
|
|