Claymore's CryptoNote AMD GPU Miner v11.3

[idontknowmining]

I've got Gigabyte RX570 cards, with Samsung memory.  Trying to mod isn't working.
Once I change the Strap values the card is no long recognized by the sytem, even though it was working
fine beforehand.  Blockchain drivers are installed and working, is there anything else I need to do?

Tried modding the card myself and also modding using https://anorak.tech/t/gigabyte-rx-570-aorus/34867 mods.
Neither worked.

Currently mining Monero at 770 H/s and trying to get up to 900.

TIA

[Claymore]

I uploaded v11.2 for Linux.

[notbatman]

I uploaded v11.2 for Linux.

Were the issues with nicehash resolved?

[xeridea]

I've got Gigabyte RX570 cards, with Samsung memory.  Trying to mod isn't working.
Once I change the Strap values the card is no long recognized by the sytem, even though it was working
fine beforehand.  Blockchain drivers are installed and working, is there anything else I need to do?

Tried modding the card myself and also modding using https://anorak.tech/t/gigabyte-rx-570-aorus/34867 mods.
Neither worked.

Currently mining Monero at 770 H/s and trying to get up to 900.

TIA

Did you run https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher to remove BIOS signature check?

For best mining with Samsung, use Ubermix strap http://www.overclock.net/t/1604567/polaris-bios-editing-rx5xx-rx4xx and at least 1240MHz core. I use the 2.3 version less extreme.  Some cards need slightly lower memclock for this mod. Speeds 970H+.

[abjake]

Finally have my 3x vega 64 rig running on 11.2 and windows

Only getting around 3050 H/s... Anyone have any ideas on why that may be? Haven't overclocked further than using the turbo setting in wattman

I'm getting a WATCHDOG: GPU 1 hangs in OpenCL call, exit
Then everything stops running I know Claymore said vega wasn't supported in linux that's why I was getting errors there but it's been working the past 2 days in windows.

Also I've set my virtual memory to 24gb since I'm running 3 8gb cards

Edit: according to my log it's happening on watchdog thread 5,6, and 7.

[abg00]

I uploaded v11.2 for Linux.

rx550 not supported?

[asimkn]

Hey every1! ,)

Im trying mining for the first time and just got my rx480 working, so i dont understand much of this. was tinkering with the -h value deafult says 4092MB memory used @330H/s; with 2000 says 8200MB @124H/s; with 600 says 2460MB @565H/s; with 400 says 1638MB @594H/s; with 200 says 818MB @435H/s

these are the commands im using
NsGpuCNMiner.exe -xpool stratum+tcp://pool.supportxmr.com:7777 -xwal  42mKc9YoePGjXso7LNnrN8WBdwqZYZJ9H7cHAeUkaVEj4JMr9J1dw3928B5maZPaeshk8RhvNpJrK8d wNWRW8xY61Y1sLp4 -xpsw z -dmem 1 -h 400 -tt 80 -tstop 95 -fanmax 98

by whats been posted, shouldn't I get much better results?

edit:
the log
23:59:43:839   2018   args: -xpool stratum+tcp://pool.supportxmr.com:7777 -xwal 42mKc9YoePGjXso7LNnrN8WBdwqZYZJ9H7cHAeUkaVEj4JMr9J1dw3928B5maZPaeshk8RhvNpJrK8d wNWRW8xY61Y1sLp4 -xpsw z -dmem 1 -h 200 -tt 80 -tstop 95 -fanmax 98
23:59:43:839   2018   
23:59:43:839   2018   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
23:59:43:839   2018   º           Claymore's CryptoNote AMD GPU Miner v11.2            º
23:59:43:839   2018   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
23:59:43:839   2018   
23:59:43:839   2018   b533
23:59:44:041   2018   XMR: 1 pool is specified
23:59:44:041   2018   Main Monero pool is pool.supportxmr.com:7777
23:59:44:182   2018   OpenCL platform: AMD Accelerated Parallel Processing
23:59:44:182   2018   AMD topology bug detected, fix it
23:59:44:634   2018   failed to get path for device 0
23:59:44:743   2018   OpenCL initializing...
23:59:44:743   2018   driver 10.0.2527.7
23:59:44:743   2018   AMD Cards available: 1
23:59:44:743   2018   GPU #0: Ellesmere (Radeon (TM) RX 480 Graphics), 8192 MB available, 36 compute units (pci bus 0:0:1)
23:59:44:743   2018   GPU #0 recognized as Radeon RX 480/580
23:59:44:743   2018   card 0, m1 8192, m2 4048 w 288
23:59:44:759   2018   POOL version
23:59:44:759   2018   b141
23:59:44:759   2018   Platform: Windows
23:59:44:868   2018   start building OpenCL program for GPU 0...
23:59:44:868   2018   done
23:59:45:102   2018   GPU #0 algorithm ASM, -h 200, -dmem 1 (Memory used: 818MB)
23:59:45:102   2018   Total cards: 1
23:59:59:240   20e0   XMR: Stratum - connecting to 'pool.supportxmr.com' <37.59.52.83> port 7777 (unsecure)
23:59:59:255   2018   Watchdog enabled
23:59:59:255   2018   Remote management (READ-ONLY MODE) is enabled on port 3333
23:59:59:255   2018   

23:59:59:287   20e0   send: {"method": "login", "params": {"login": "42mKc9YoePGjXso7LNnrN8WBdwqZYZJ9H7cHAeUkaVEj4JMr9J1dw3928B5maZPaeshk8RhvNpJrK8d wNWRW8xY61Y1sLp4", "pass": "z", "agent": "xmr/1.0"}, "id": 1}

23:59:59:287   20e0   XMR: Stratum - Connected (pool.supportxmr.com:7777) (unsecure)
23:59:59:349   20e0   got 381 bytes
23:59:59:349   20e0   buf: {"id":1,"jsonrpc":"2.0","error":null,"result":{"id":"c3d76f79-543d-4273-bc7c-66f3e036befb","job":{"blob":"0606b6d1dad205b1a63ae964313bc3a4e1188154e7823688e07346d5f2d747ddd3db408a2f97d90 000000081e76d3dc975a0a293afdbbd65c9c5d3dc94272684491d08bb2f86764fa89ba805","job_id":"GdWfDrVkRYDNDwzLSMcWitp8Nz7r","target":"169f0200","id":"c3d76f79-543d-4273-bc7c-66f3e036befb"},"status":"OK"}}

23:59:59:349   20e0   parse packet: 380
23:59:59:349   20e0   new buf size: 0
00:00:02:266   2018   ADL: Cannot find any AMD adapters
00:00:05:277   2018   ADL: Cannot find any AMD adapters
00:00:08:288   2018   ADL: Cannot find any AMD adapters
00:00:11:299   2018   ADL: Cannot find any AMD adapters
00:00:14:309   2018   ADL: Cannot find any AMD adapters
00:00:17:320   2018   ADL: Cannot find any AMD adapters
00:00:19:489   c68   
00:00:19:489   c68   GPU #0: Ellesmere (Radeon (TM) RX 480 Graphics), 8192 MB available, 36 compute units (pci bus 0:0:1)
00:00:19:489   c68   XMR - Total Speed: 436 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
00:00:19:489   c68   XMR: GPU0 436 H/s
00:00:19:489   c68   Incorrect XMR shares: none
00:00:19:489   c68   1 minute average XMR total speed: 434 H/s
00:00:19:489   c68   Pool switches: XMR - 0
00:00:19:489   c68   Current XMR pool share target: 0x00029f16 (diff: 25000H)
00:00:19:489   c68   ADL: Cannot find any AMD adapters
00:00:19:489   c68   
00:00:20:331   2018   ADL: Cannot find any AMD adapters
00:00:23:339   2018   ADL: Cannot find any AMD adapters
00:00:26:350   2018   ADL: Cannot find any AMD adapters
00:00:29:361   2018   ADL: Cannot find any AMD adapters
00:00:29:361   2018   ADL: Cannot find any AMD adapters
00:00:29:361   2018   em hbt: 0, fm hbt: 78,
00:00:29:361   2018   watchdog - thread 0, hb time 1794
00:00:29:361   2018   watchdog - thread 1, hb time 1810
00:00:29:361   2018   watchdog - thread 2, hb time 874
00:00:29:361   2018   watchdog - thread 3, hb time 874
00:00:32:372   2018   ADL: Cannot find any AMD adapters
00:00:35:383   2018   ADL: Cannot find any AMD adapters
00:00:38:393   2018   ADL: Cannot find any AMD adapters
00:00:41:404   2018   ADL: Cannot find any AMD adapters
00:00:44:415   2018   ADL: Cannot find any AMD adapters
00:00:47:426   2018   ADL: Cannot find any AMD adapters
00:00:50:437   2018   ADL: Cannot find any AMD adapters
00:00:53:194   20e0   got 310 bytes
00:00:53:194   20e0   buf: {"jsonrpc":"2.0","method":"job","params":{"blob":"0606b3d2dad205796fc49c11013ae725a801474ea8c732278a5575dad0d05fc9610c397842efc40 0000000041b0bdba9b5b8d289010ab80785e9662efc4fc332070279bbea8cb3b1a1e31b02","job_id":"jqdB77nhwTsZg8+ebUSCmMgZc4J6","target":"169f0200","id":"c3d76f79-543d-4273-bc7c-66f3e036befb"}}

00:00:53:194   20e0   parse packet: 309
00:00:53:194   20e0   new buf size: 0
00:00:53:194   20e0   XMR: 01/11/18-00:00:53 - New job from pool.supportxmr.com:7777
00:00:53:194   20e0   target: 0x00029f16 (diff: 25000H)
00:00:53:194   20e0   XMR - Total Speed: 436 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
00:00:53:194   20e0   XMR: GPU0 436 H/s
00:00:53:287   2158   Job changed, drop current round
00:00:53:287   2158   GPU 0, dropped current job (cp 2-6)
00:00:53:287   7e4   Job changed, drop current round

[Detuner]

was tinkering with the -h value deafult says 4092MB memory used @330H/s; with 2000 says 8200MB @124H/s; with 600 says 2460MB @565H/s; with 400 says 1638MB @594H/s; with 200 says 818MB @435H/s

Try "-dmem 1 -h 512" or "-dmem 0 -h 1024".
PS: I noticed you have a 8gb version, so you should also try "-dmem 1 -h 1024" or "-dmem 0 -h 2048".

[idontknowmining]

For best mining with Samsung, use Ubermix strap http://www.overclock.net/t/1604567/polaris-bios-editing-rx5xx-rx4xx and at least 1240MHz core. I use the 2.3 version less extreme.  Some cards need slightly lower memclock for this mod. Speeds 970H+.

What are your Memory Clock settings?
I have mine at 2150 and the Core clock at 1244 and it just crashes the machine after mod.
I have set -h at 1024 and 960, both crash the machine.

[rdluffy]

I'm having a lot of trouble trying to mine with Cryptonote

I have 2 x RX 580 4gb Sapphire with biosmod
Windows 10 Pro Updated
Latest AMD drivers, on Compute mode

I already tried all versions of Cryptonote but 1 card I get 789~800h and another one 450~500hs, and sometimes the PC crashes and I have to restart manually
I don't know why

with SGMiner both cards performs the same but the miner are unstable

Anyone having the same problem?

[vikstar1000]

2 rigs
x2 R9 290x OC @ 1070/1620 1700 H/s
x2 R9 290 OC @ 1070/1650   1650 H/s

here is my config:

==================================
-xpool stratum+tcp://pool.etn.spacepools.org:7777
-xwal My ETN wallt
-xpsw x
#-nofee 1
-allpools 1
#-tt 75
==================================

I feel like i should have a lot more in here to tweak things a bit

also, when you make a change do i have to close the miner and reopen or is there a refresh option in the miner? because when i close it, i get a crash and sometimes i have to jump through hoops to uninstall and reinstall the driver which takes an hour sometimes.

Thanks for posting this, I was looking for another ETN mining pool and spacepools looks like a good alternative. Finding blocks alot more frequently but will have to see if it works out to more ETN since many more miners are connected. Was using easyhash.io and was averaging 20-30 ETN per day running same rig x2 R9 290 OC @ 1070/1650   1650 H/s.

I was hoping you can help. I am a novice at this and just started mining with 2 x RX580 8gb Nitro+'s.  I am using easyhash and mining at a total at 1450h/s but my total is still $0.34 over 15 hours. my expect payout over 7 days is $60.00.  does the payout catch up with itself as it seems very low for what I'm mining. thanks Vik

[notbatman]

For everybody modding and overclocking the temp sensor is attached to the GPU and reports cool but it's your VRAM that's overheating, set your fans to 100%.

[BSAlex]

There seems to be a problem with this version.


Update #3

After restarting it went back to 980h/315h

Not sure whats up with that.

Try to play a bit with intensity for the second card. Expect to get much more after lowering from default level.

[bmf2017]

On my rig which has a gtx1060 with a couple AMD cards, claymore cryptonote does not see the nvidia cards.

The claymore ethminer sees them all as expected.

This is on win 10.

I am launching with...

GPU_FORCE_64BIT_PTR 1
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

NsGpuCNMiner.exe  -xpool stratum+tcp://snip -xwal snip -xpsw x

the process sees gpu0 and gpu1 as an amd560 and an amd570(correct) and gives no evidence that it can see the nvidia...

[xeridea]

For best mining with Samsung, use Ubermix strap http://www.overclock.net/t/1604567/polaris-bios-editing-rx5xx-rx4xx and at least 1240MHz core. I use the 2.3 version less extreme.  Some cards need slightly lower memclock for this mod. Speeds 970H+.

What are your Memory Clock settings?
I have mine at 2150 and the Core clock at 1244 and it just crashes the machine after mod.
I have set -h at 1024 and 960, both crash the machine.

Mem 1960-2000MHz depending on rig. The strap is a lot more optimized, giving huge boost, especially to cryptonight for some reason. I don't set h, but default for newer miner is 1024 , with dmem 1.

[xeridea]

On my rig which has a gtx1060 with a couple AMD cards, claymore cryptonote does not see the nvidia cards.

The claymore ethminer sees them all as expected.

This is on win 10.

I am launching with...

GPU_FORCE_64BIT_PTR 1
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

NsGpuCNMiner.exe  -xpool stratum+tcp://snip -xwal snip -xpsw x

the process sees gpu0 and gpu1 as an amd560 and an amd570(correct) and gives no evidence that it can see the nvidia...

Claymore's CryptoNote AMD GPU Miner v11.2

Here is your answer.

[annicketucufaw]

Can someone help me because in my miner the address is on XMR and I want to mine ETN. It says UnknownOption. Can you give me a sample code?

[Habieredkill]

yeah seeing the same but im using cast xmr , what hash rates are you getting ?

for my underclocked 470s i see 700 h/s 1100 core and 1925 mem ,
for my underclocked 480 i see 800 h/s 1100 core and 2100 mem

on cast i see like 660 and 730 respectively , but less power use

[notbatman]

Can someone help me because in my miner the address is on XMR and I want to mine ETN. It says UnknownOption. Can you give me a sample code?

-allpools 1

Read the Readme!!!.txt

[notbatman]

^^^

Code:

setx YOUR_WALL_OF_TEXT_ACTIVATES_MY_ALMONDS 1

P.S.

Your RX550 isn't supported with Claymore's miner.