Claymore's CryptoNote AMD GPU Miner v11.3

[Ik88]

Hello

Say please message below problem or i can work ?

warning: Linking two modules of different data layouts

[phzi]

Hello

Say please message below problem or i can work ?

warning: Linking two modules of different data layouts

Try reading/searching the thread you're posting in before posting a question:

also got this error
WARNING: Linking two modules of different data layouts!
WARNING: Linking two modules of different target triples: 'amdil64-pc-unknown-amdopencl' and 'amdil-pc-unknown-amdopencl'

but miner continue to work

You get that from running mismatched miner and driver versions.

Strange error on latest miner, linking two modules of different data layouts.

Add this to .bat:

setx GPU_FORCE_64BIT_PTR 0

So... first make sure you're running 13.12 drivers, and the 13.12 miner.  Then if that doesn't help, try setting the GPU_FORCE_64BIT_PTR environment variable.

[Ik88]

Hello

Say please message below problem or i can work ?

warning: Linking two modules of different data layouts

Try reading/searching the thread you're posting in before posting a question:

also got this error
WARNING: Linking two modules of different data layouts!
WARNING: Linking two modules of different target triples: 'amdil64-pc-unknown-amdopencl' and 'amdil-pc-unknown-amdopencl'

but miner continue to work

You get that from running mismatched miner and driver versions.

Strange error on latest miner, linking two modules of different data layouts.

Add this to .bat:

setx GPU_FORCE_64BIT_PTR 0

So... first make sure you're running 13.12 drivers, and the 13.12 miner.  Then if that doesn't help, try setting the GPU_FORCE_64BIT_PTR environment variable.

I use catalyst 14.9 + miner 9.1 for 14.x cata .. i see message in start (warning: Linking two modules of different data layouts x5) later miner work.. hashrate on pool normal, maybe can not pay attention to this warning?

[Claymore]

I use catalyst 14.9 + miner 9.1 for 14.x cata .. i see message in start (warning: Linking two modules of different data layouts x5) later miner work.. hashrate on pool normal, maybe can not pay attention to this warning?

Try to add this to .bat file:

setx GPU_FORCE_64BIT_PTR 0

[Ik88]

I use catalyst 14.9 + miner 9.1 for 14.x cata .. i see message in start (warning: Linking two modules of different data layouts x5) later miner work.. hashrate on pool normal, maybe can not pay attention to this warning?

Try to add this to .bat file:

setx GPU_FORCE_64BIT_PTR 0

no effect

[phzi]

I use catalyst 14.9 + miner 9.1 for 14.x cata .. i see message in start (warning: Linking two modules of different data layouts x5) later miner work.. hashrate on pool normal, maybe can not pay attention to this warning?

Try to add this to .bat file:

setx GPU_FORCE_64BIT_PTR 0

no effect

Just use 13.12 then.

[mik_druid]

Can you mine under latest ATI drivers without loosing speed?

[mik_druid]

Can you mine under latest ATI drivers without loosing speed? Is there a faster monero GPU Miner than claymore's >? Just curious

[berbip]

Is there a way to set gpu clock and memory speed in the startup batch file ?

Thanksalot

[Claymore]

Is there a way to set gpu clock and memory speed in the startup batch file ?

Thanksalot

Currently miner has no overclocking capabilities.

[aikklond]

I have n A8 5600 poweringmy rig, when i Run both GPU and CPU XMR miner the GPU part fails in seconds (only for the embeded GPU all other GPUs mine as ususal)..

is this a result of the increased power draw or something else?

[qqqq]

Any plans for new ver ?

[Claymore]

Any plans for new ver ?

No major updates for now, but I'm going to release small update with better stability if CPU is used for mining some CPU coin, right now on some systems high CPU load causes often automatic restarts of GPU threads.

[qqqq]

Any plans for new ver ?

No major updates for now, but I'm going to release small update with better stability if CPU is used for mining some CPU coin, right now on some systems high CPU load causes often automatic restarts of GPU threads.

Ok, Thanks.

[cisahasa]

someone to post proxy link again?

[Ik88]

Claymore man look new driver 14.12 whit mistake version 9.1 + 300-500 hashrate..need new version miner)

[tearsdontfall]

my pool name is minergate ...


i am using your Claymore CryptoNote GPU miner to mine bytecoin ...


my gpu is r7 240 1gb ddr5 ... but its not mining ...


check this : http://prntscr.com/5fbytn


this is my amd catalyst info :

http://prntscr.com/5fcdpu



please help me out ...

[Hatch]

No major updates for now, but I'm going to release small update with better stability if CPU is used for mining some CPU coin, right now on some systems high CPU load causes often automatic restarts of GPU threads.

I have been running it on an FX8350 with an old 5770 and on a Phenom X6 1090T and an R7-250. If I run the same number of threads as I have cores, it causes GPU issues. Drop one thread leaving a core free and it runs fine for days...

My biggest wish is to get anywhere close to the same performance out of the Phenom X4 and X6 series CPU's as the FX gets with its AES Instruction set. Is there anything that can be done to make the Phenoms faster?

[mafostedu]

Any plans for new ver ?

No major updates for now, but I'm going to release small update with better stability if CPU is used for mining some CPU coin, right now on some systems high CPU load causes often automatic restarts of GPU threads.

Thanks for noticing this issue. I have been still mining with 6.1 since 9.1 is very unstable while mining with CPU along with GPU. Any time frame regarding new release ?
Going for a small vacation that's why asking.

[adaseb]

Yes i've been using it also but honestly I wish the price of XMR would increase because mining XMR is no different then X11 right now.